2019 MERCEDES-BENZ C CLASS display

Adjusting the ambient lighting
Multimedia system:
Vehicle÷Light SettingsAmbient Light
Settingthe color
SelectColor.
Set a color.
Adjusting the brightness
SelectBrightness.
Set a brightnessvalue.
Activating the brightnessfor zones
SelectBrightness Zones.
Activatesor deactivateSthe function.TheDisplay,FrontandRearzones can be setseparately.
Settingthe interior lighting switch-off delaytime
Multimedia system:
Vehicle÷Light SettingsInt. Light Switch Off
Setthe switch-off delay time.
Changing bulbs (onlyforvehicles with halo‐gen headlamps)
Notes onchanging bulbs
\nWARNINGRisk of burns from hot com‐ponent parts whilstreplacing a bulb
Bulbs, lamps and plugs can becomeveryhotduring operation.
Whenreplacing a bulb,you could burnyour‐self onthese component parts.
Allowthe component partstocooldown beforereplacingthe bulb.
RDo not use a bulb if it has been dropped or ifitsglass has been scratched. The bulb mayotherwiseexplode.
RDo nottouchtheglass bulb withyour barehands.
RProtect bulbs from moisture and do not allowbulbstocome into contact withliquids.
12 8Light and visibility

Removeprotectivefilm1fromthe mainte‐nance display onthe tip ofthe newly instal‐led wiper blades.
Ifthe color ofthe maintenance displaychangesfrom blackto yellow,the wiper blades should bereplaced.
The duration untilthe colorchangesvariesdepending onthe usage conditions.
Mirrors
Operatingthe outside mirrors
\nWARNINGRisk of injuryfrom adjustingthevehicle settings whilethevehicle is inmotion
You could lose control ofthevehicle inthefollowing situations:
Rifyou adjustthe driver's seat,the headrestraint,thesteering wheel orthe mirrorwhilethevehicle is in motion
Rifyoufastenyour seat belt whilethevehi‐cle is in motion
Beforestartingthe engine: adjustthedriver's seat,the headrestraint,thesteering wheel orthe mirror andfastenyour seat belt.
\nWARNINGRisk of accident duetomis‐judgment of distances when usingthepassenger mirror
The outside mirror onthe front-passengersidereflects objects on a smaller scale. Theobjects in view are infact closerthantheyappear.
As aresult,you may misjudgethe distancebetweenyou andtheroad user drivingbehindyou,forexample, whenchanginglanes.
Therefore, always lookoveryour shoul‐der in ordertoensurethatyou areaware ofthe actual distance betweenyou andtheroad users driving behindyou.
Foldingthe outside mirrorsin/out
Brieflypress switch1.
Resettingthe outside mirrors
Ifthe battery has been disconnected or com‐pletely discharged,the outside mirrorsmustbereset. Onlythen willthe automatic mirrorfolding functionworkproperly.
Brieflypress switch1.
134Light and visibility

Toswitch onthe power supply:press but‐ton1once.You can activatethe windshield wipers,forexample.
The power supplyis switched off again ifthefol‐lowing conditions are met:
RYou openthe driver's door
RYou press button1twice.
Toswitch onthe ignition:press button1twice.The indicator lamps inthe instrument clusterlight up.
The ignition is switched off again if one ofthefollowing conditions is met:
RVehicles with automatic transmission:you do notstartthevehicle within15minutes andthe transmission is in posi‐tion]orthe electric parking brake isapplied.
RYou press button1once.
Startingthevehicle
Startingthevehicle withthestart/stop but‐ton
Requirements:RThe SmartKeyis inthevehicle and isrecog‐nized.
Shiftthe transmissiontoposition]or\\.
Depressthe brake pedal and press button1once.
Ifthevehicle does notstart:switch off non-essential consumers and press button1once.
Ifthevehiclestill does notstart andthePlace the Key in the Marked Space SeeOperator's Manualdisplay message alsoappears inthe multifunction display:startthevehicle in emergency operation mode.
You can switchoffthe engine while drivingbypressing button1for aboutthree seconds orbypressing button1three times within a sec‐ond. Be suretoobservethe safety notes under"Driving tips".
Startingthevehicle in emergency operationmodeIfthevehicle does notstart andthePlace theKey in the Marked Space See Operator's Manualmessage appears inthe multifunction display,you canstartthevehicle in emergency operationmode.
Driving and parking14 5

Ryou turnthesteering wheel hard at a lowspeed.
The engine isrestarted automatically if:
Rvehicles with automatic transmission:intransmission position[,youreleasethebrake pedal whenthe HOLD function is notactive.
Rvehicles with automatic transmission:you shift into transmission position[or^.
Ryou depressthe accelerator pedal.
Ran automatic enginestart is necessary.
Ifthe enginewas switched offbythe ECOstart/stop function andyou leavethevehicle, awarn‐ingtone sounds andthe engine is notrestarted.TheVehicle Operational Switch the Ignition OffBefore Exitingdisplay message also appears inthe multifunction display.Ifyou do not switchoffthe ignition,the ignition is automaticallyswitched off afterthree minutes.
Vehicles with a 48 V on-board electrical sys‐tem (EQ Boosttechnology)
The engine is switched off automatically inthefollowing situations if allvehicle conditionsforan automatic enginestop are met:
Ryou brakethevehicletoastandstill in trans‐mission position[or\\.
Ryou depressthe brake pedal while travelingat a low speed.
Ifyou switchonthe HOLD function or selectanother transmission position^,the engine willautomaticallystop inthefollowing situations:
Ryoustop behind avehiclethat is pullingaway.
Ryoustop at astop sign whenthere is novehi‐cle in front ofyou.
Ryou turnthesteering wheel hard at a lowspeed.
The engine isrestarted automatically if:
Ryoureleasethe brake pedal in transmissionposition[whenthe HOLD function is not
active and one ofthefollowing conditions isgiven:
-the drive programAor;is notselected
-the drive programAor;is selec‐ted butthevehicle does notstarttomove.
-the drive programAor;is selec‐ted,thevehicle moves at a speed of morethan15mph (20 km/h) and Glide modeis not activated.
Ryou engagetransmission position[or^.
Ryoureleasethe brake pedal,thevehicle isnot in Glide mode and itstartstomoveon agentle downhill gradient at a speed below2mph (3km/h).
Ryou depressthe accelerator pedal.
Ran automatic enginestart is necessary.
Ifthe enginewas switched offbythe ECOstart/stop function andyou leavethevehicle, awarn‐ingtone sounds andthe engine is notrestarted.TheVehicle Operational Switch the Ignition OffBefore Exitingdisplay message also appears in
Driving and parking151

the multifunction display.Ifyou do not switchoffthe ignition,the ignition is automaticallyswitched off afterthree minutes.
Deactivating or activatingthe ECOstart/stop function
Press button1.If indicator lamp2lights up,the ECOstart/stop function is activated.
Depending onthe model andthevehicleequipment,the button may also be locatedat a different position inthe center console.
ECO display function
The ECO display summarizesthe drivingcharac‐teristics fromthestart ofthe journeytoits com‐pletion and assistsyou in achievingthe mosteconomical drivingstyle.
You can influence consumption ifyou:
Rdrive with particular care
Rdrivethevehicle in drive program;
Robservethegearshiftrecommendations
The inner segment lights up andthe outer seg‐mentfills up:
R1Moderate acceleration
R2Gentle deceleration androlling
R3Consistent speed
The inner segment does not light up andtheouter segment empties:
R1Sporty acceleration
R2Heavy braking
R3Fluctuations in speed
You havedriven economically when:
Rthethree outer segments are completelyfil‐led simultaneously
Rthe ECO display lights up
The additionalrange achieved as aresult ofyourdrivingstyle in comparison with a driver with averysporty drivingstyle is shown underBonusfr. Start. Therange displayed does not indicate afixedreduction in consumption.
15 2Driving and parking

DYNAMIC SELECT switch
Function oftheDYNAMIC SELECT switch
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you mayfailtorec‐ognize dangers.
UsetheDYNAMIC SELECT switchtochangebetweenthefollowing drive programs:
R=(Individual):individual settings
RB(Sport Plus):particularly sporty drivingstyle
RC(Sport):sporty drivingstyle
RA(Comfort):comfortable and economi‐cal drivingstyle
R;(Eco):particularlyeconomical drivingstyle
The drive program selected appears inthemultifunction display ofthe on-board com‐puter.
Depending onthe drive program,thefollowingsystemschangetheircharacteristics:
RDrive
-Engine and transmission management
-Active Distance AssistDISTRONIC
RESP®
RVehicles with AIRMATIC orDYNAMICBODYCONTROL:suspension
RElectric powersteering
Selectingthe drive program
PressDYNAMIC SELECT switch1forwardsor backwards.The drive program selected appears inthemultifunction display.
Configuring drive program I
Multimedia system:
VehicleeDYNAMIC SELECTIndividual
Selectthe individual setting.
Switchingthe operationfeedbackfor driveprogram on/off
Multimedia system:
VehicleeDYNAMIC SELECT
SwitchNotification for Useronsor offS.Whenthis function is active, a correspondingmessage is shown inthe media display whena drive program is selected withtheDYNAMIC SELECT switch.
Driving and parking15 3

Displayingvehicle data
Multimedia system:
VehicleeDYNAMIC SELECT
SelectVehicle Data.Thevehicle data is displayed.
Displaying engine data
Multimedia system:
VehicleeDYNAMIC SELECT
SelectEngine Data.
Thevaluesfor engine output and enginetor‐que may deviate fromthe nominalvalues.
Itemsthat can influencethis are,forexam‐ple:
RSea level
RFuel grade
ROutsidetemperature
Automatic transmission
DIRECT SELECT lever
Function ofthe DIRECT SELECT lever
\nWARNINGRisk of accident and injuryduetochildren left unattended inthevehicle
Ifchildren are left unattended inthevehicle,theycould:
Ropen doors,thereby endangeringotherpersons orroad users.
Rget out ofthevehicle and be hitbyoncoming traffic.
Roperate vehicle equipment and becometrapped,forexample.
In addition,children could also setthevehi‐cle in motion,forexample,by:
Rreleasingthe parking brake.
Rshiftingthe automatic transmission out ofpark position].
Rstartingthe engine
Never leavechildren and animals unat‐tended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
Keepthe SmartKeyout ofthereach ofchildren.
\nWARNINGRisk of accident duetoincor‐rectgearshifting
Ifthe engine speed is higherthanthe idlespeed andyou engagethe transmission posi‐tion[or^,thevehicle may acceleratesharply.
Ifyou engagethe transmission position[or^always depressthe brakepedalfirmlyand do not accelerate atthe same time.
Usethe DIRECT SELECT levertoshiftthe trans‐mission position. The current transmission posi‐tion is displayed inthe multifunction display.
15 4Driving and parking

]Parkposition
^Reversegear
\\Neutral
[Drive position
Engagingreversegear RDepressthe brake pedal and pushtheDIRECT SELECT lever upwards pastthefirstpoint ofresistance.The transmission position displayshows^inthe multifunction display.
Engaging neutral NDepressthe brake pedal and pushtheDIRECT SELECT lever up or downtothefirstpoint ofresistance.The transmission position displayshows\\inthe multifunction display.
Subsequentlyreleasingthe brake pedal willallowyoutomovethevehicle freely,e.g.topushit ortow itaway.
Proceed asfollowsifyouwantthe automatictransmissiontoremain in neutral\\\\even ifthe ignition is switched off:
Startthevehicle.
Depressthe brake pedal and engage neutral\\.
Releasethe brake pedal.
Switchthe ignition off.
Ifyouthenexitthevehicle leavingtheSmartKeyinthevehicle,the automatic trans‐missionremains in neutral\\.
Engaging park position PObservethe notes on parkingthevehicle(page161).
Depressthe brake pedal untilthevehicle isstationary.
Whenthevehicle isstationary,press button].Parkposition is only engaged whenthe trans‐mission position display]is shown inthemultifunction display.If no transmission posi‐tion display]appears, securethevehicletoprevent it fromrollingaway.
Parkposition]is engaged automatically if oneofthefollowing conditions is met:
Ryou switchoffthe ignition whenthevehicleisstationary andthe transmission is in posi‐tion[or^.
Ryou openthe driver's door whenthevehicleisstationary or when driving at averylow
Driving and parking15 5