2019 MAZDA MODEL CX-30 ECO mode

Rear View Monitor*
▼Rear View Monitor
The rear view monitor provides visual
images of the rear of the vehicle when
reversing.
WARNING
Always drive carefully confirming the
safety of the rear and the surrounding
conditions by looking directly with
your eyes:
Reversing the vehicle by only looking at
the screen is dangerous as it may cause
an accident or a collision with an
object. The rear view monitor is only a
visual assist device when reversing the
vehicle. The images on the screen may
be
different from the actual conditions.
CAUTION
¾Do not use the rear view monitor
under the following conditions:
Using the rear view monitor under
the following conditions is
dangerous and could result in injury
or vehicle damage or both.
¾Icy or snow-covered roads.
¾Tyre chains or a temporary spare
tyre is installed.
¾The vehicle is on a road incline.
¾When the display is cold, images
may course across the monitor or the
screen and may be dimmer than
usual, which could cause difficulty in
confirming the surrounding
conditions of the vehicle. Always
drive carefully confirming the safety
of the rear and the surrounding
conditions by looking directly with
your eyes.
¾Do not apply excessive force to the
camera. The camera position and
angle may deviate.
¾Do not disassemble, modify, or
remove it as it may no longer be
waterproof.
¾The camera cover is made of plastic.
Do not apply degreasing agents,
organic solvents, wax, or glass
coating agents to the camera cover.
If any are spilled on the cover, wipe
off with a soft cloth immediately.
¾Do not rub the camera cover
forcefully with an abrasive or hard
brush. The camera cover or lens may
be scratched which might affect the
images.
NOTE
xIf water, snow, or mud is stuck on
the camera lens, wipe it
off using a
soft cloth. If it cannot be wiped off,
use a mild detergent.
xIf the camera temperature changes
rapidly (Hot to cold, cold to hot), the
rear view monitor may not operate
correctly.
xWhen replacing the tyres, consult an
expert repairer (we recommend an
Authorised Mazda Repairer).
Replacing the tyres could result in
deviation of the guide lines which
appear on the display.
xIf the vehicle's front, side, or rear has
been involved in a collision, the
alignment of the rear view parking
camera (location, installation angle)
may have deviated. Always consult
an expert repairer (we recommend
an Authorised Mazda Repairer) to
have the vehicle inspected.
When Driving
Rear View Monitor
4-238*Some models.

Operating Tips
▼Operating Tips
xOperate the air-conditioning system
with the engine running.
xTo prevent the battery from being
discharged, do not leave the fan
control dial/switch on for a long
period of time with the ignition
switched ON when the engine is not
running.
x(With i-stop)
The
airflow amount may decrease
slightly while the i-stop function is
operating.
xClear all obstructions such as leaves,
snow and ice from the bonnet and
the air inlet in the cowl grille to
improve the system efficiency.
xUse the air-conditioning system to
defog the windows and dehumidify
the air.
xThe recirculate mode should be used
when driving through tunnels or
while in a
traffic jam, or when you
would like to shut off outside air for
quick cooling of the interior.
xUse the outside air position for
ventilation or windscreen defrosting.
xIf the vehicle has been parked in
direct sunlight during hot weather,
open the windows to let warm air
escape, then run the air-conditioning
system.
xRun the air conditioner about 10
minutes at least once a month to
keep internal parts lubricated.
xHave the air conditioner checked
before the weather gets hot. Lack of
refrigerant may make the air
conditioner less efficient.
The refrigerant specifications are
indicated on a label attached to the
inside of the engine compartment. If
the wrong type of refrigerant is used,
it could result in a serious
malfunction of the air conditioner.
Consult a professional, government
certified repairer for the inspection
or repair because a special device is
required for the air conditioner
maintenance.
For details, consult an expert repairer
(we recommend an Authorised
Mazda Repairer).
1. Label
Interior Features
Air-Conditioning System
5-2

Recirculated air position ()
Outside air is shut
off. Use this position
when going through tunnels, driving in
congested traffic (high engine exhaust
areas) or when quick cooling is
desired.
Outside air position (
)
Outside air is allowed to enter the
cabin. Use this mode for ventilation or
windscreen defrosting.
WARNING
Do not recirculate the air in the cabin
during cold or rainy weather:
Recirculating the air in the cabin during
cold and rainy weather is dangerous as
it will cause the windows to fog up.
Your vision will be hampered, which
could lead to a serious accident.
SYNC (Synchronized Temperature)
switch
Use the SYNC switch to change the
mode between the individual
operation (driver and passenger) and
interconnection (simultaneous)
modes.
Interconnection mode (indicator light
turns on)
The set temperature for the driver and
front passenger is controlled
simultaneously.
Individual operation mode (indicator
light turns off)
The set temperature can be controlled
individually for the driver and front
passenger.
Windscreen defroster switch
Press the switch to defrost the
windscreen and front door windows.
Refer to Windscreen Defrosting and
Defogging on page 5-11.
Rear window defogger switch
Press the rear window defogger switch
to defrost the rear window.
Refer to Rear Window Defogger on
page 4-66.
▼Operation of Automatic Air
Conditioner
1. Press the AUTO switch. Selection of
the
airflow mode, air intake
selector and amount of
airflow will
be automatically controlled.
2. Use the temperature control dial to
select a desired temperature.
If you want to set the temperature
on the front passenger's side
separately from the driver's side,
turn the front passenger
temperature control dial to switch
the mode automatically to the
individual operation mode and set
the temperature for the front
passenger's side.
To turn off the system, press the power
switch.
NOTE
xSet the control dial to the
recommended temperature of 22 °C
(72 °F), and then adjust it as desired.
xSetting the temperature to maximum
hot or cold will not provide the
desired temperature at a faster rate.
xWhen selecting heat, the system will
restrict
airflow until the engine has
warmed to prevent cold air from
blowing out of the vents.
▼Windscreen Defrosting and
Defogging
Press the windscreen defroster switch.
In this position, the outside air position
is automatically selected, and the air
Interior Features
Air-Conditioning System
5-11

▼Operation Using Voice Recognition Function
The shape of the switches differs depending on the vehicle model.
No. Item Explanation
1
Talk/Pick-up button>8
When the button is pressed, the voice recognition top screen is dis-
played and the voice recognition is activated.

(While voice guidance is being announced)
Press the button to skip the voice guidance.
2
Hang-up button:
Press the button to end the voice recognition.
Voice recognition activation
When the talk/pick-up button on the audio remote control switch is pressed, the
voice recognition top screen is displayed.
NOTE
While Apple CarPlay or Android Auto™ is connected, Siri or Android Auto™ voice
recognition is activated.
At this time Mazda Connect voice recognition is not activated.
Commands usable at any time
“Help” - Can be used to check for usable voice commands.
“Back” - Returns to the previous screen. When a voice command is spoken while on
the telephone number input screen, the content that was previously input is deleted.
“Cancel”- The voice recognition is ended.
To learn more on how to operate Mazda Connect
“Owner's Manual” - The operation guide screen is displayed.
Ending voice recognition
Do any one of the following operations:
Interior Features
Mazda Connect
5-23

xPress the hang-up button.xPress and hold the talk/Pick-up button.xSay the word, “Cancel”.
Convenient operating tips for using the voice recognition function
Examples of effective voice commands in various categories are displayed on top
screen of the voice recognition.
It would be convenient to know these usable voice commands in advance.
NOTE
xThe voice commands indicated in this manual are some examples of usable voice
commands. Some voice commands may be unusable depending on the vehicle
model.
xWhen the Barge-In setting is on, voice commands can be made even while the
voice guidance is being announced. For details on Barge-In, refer to the Settings
section in the Mazda Connect Owner's Manual.
xFor details on voice commands which can be used on the navigation screen, refer
to the navigation system manual.
To prevent mistaken voice recognition, be aware of the following points:
xWhen you are using a mobile phone connected via Bluetooth®, the commands
relevant to the mobile phone can be used. Connect your mobile phone to
Bluetooth
® before operating the mobile phone using voice recognition.xSpeaking in a slightly louder voice will improve voice recognition, but an
excessively loud voice is unnecessary. Try to speak in a slightly louder voice than
when talking to other passengers in the vehicle.
xYou do not need to speak slowly. Speak at a normal speed.xWhen calling a person in the device's phone book, the recognition rate increases
the longer the name is. Errors may occur with names that are short such as
“Mama”, “Home”, or “wife”.
xSpeak clearly, without pausing between words or numbers.xVoice commands other than those
specified, cannot be recognised. Speak in the
wording specified by the voice commands.
xIt is not necessary to face the microphone or approach it. Speak the voice
commands while maintaining a safe driving position.
Interior Features
Mazda Connect
5-24

Brake/Clutch Fluid
▼Inspecting Brake/Clutch Fluid
Level
WARNING
If the brake/clutch fluid level is low,
have the brakes inspected:
A low brake/clutch fluid level is
dangerous.
A low level could indicate brake lining
wear or a brake system leak which
could cause the brakes to fail and lead
to an accident.
The brakes and clutch draw fluid from
the same reservoir.
Inspect the fluid level in the reservoir
regularly. It should be kept between
the MAX and MIN lines.
The level normally drops with
accumulated distance, a condition
associated with wear of brake and
clutch linings. If it is excessively low,
have the brake/clutch system
inspected by an expert repairer (we
recommend an Authorised Mazda
Repairer).
Left-hand drive model
Without M Hybrid
With M Hybrid
Right-hand drive model
Without M Hybrid
With M Hybrid
Maintenance and Care
Owner Maintenance
6-30

Replace the tyre when this happens.
1. New tread
2. Worn tread
3. Tread wear indicator
You should replace the tyre before the
band crosses the entire tread.
▼Replacing a Wheel
WARNING
Always use wheels of the correct size
on your vehicle:
Using a wrong-sized wheel is
dangerous. Braking and handling could
be affected, leading to loss of control
and an accident.
CAUTION
A wrong-sized wheel may adversely
affect:
¾Ty re
fit
¾Wheel and bearing life
¾Ground clearance
¾Snow-chain clearance
¾Speedometer calibration
¾Headlight aim
¾Bumper height
¾Tyre Pressure Monitoring System
*
NOTE
xWhen replacing a wheel, make sure
the new one is the same as the
original factory wheel in diameter,
rim width, and offset (inset/outset).
xFor details, contact an expert repairer
(we recommend an Authorised
Mazda Repairer).

Proper tyre balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tyres can cause
vibration and uneven wear, such as
cupping and
flat spots.
Maintenance and Care
Owner Maintenance
*Some models.6-43

Light Bulbs
▼Light Bulbs
Front
Ty p e A
1. Vanity mirror lights*
2. Front overhead lights/Front map
lights
3. Side direction indicator lights
4. Front direction indicator lights/
Position lights
5. Running lights/Headlights (Low
beam)
6. Headlights (High/Low beam)
7. Running lights
8. Headlights (High beam)
*
9. Headlights (Wide-range low beam)*
Ty p e B
1. Vanity mirror lights*
2. Front overhead lights/Front map
lights
3. Side direction indicator lights
4. Running lights
*
5. Front direction indicator lights/
Position lights
6. Headlights (High/Low beam)
Rear
1. Luggage compartment light
2. High-mount brake light
3. Rear overhead light
4. Tail lights
*
5. Rear direction indicator lights
6. Brake lights/Tail lights
7. Tail lights (Liftgate side)
*
8. Reverse lights
9. Rear fog light*
10.Number plate lights
CAUTION
When removing the lens or lamp unit
using a flathead screwdriver, make sure
that the flathead screwdriver does not
contact the interior terminal. If the
flathead screwdriver contacts the
terminal, a short circuit may occur.
NOTE
xWhen replacing a bulb, contact an
expert repairer (we recommend an
Authorised Mazda Repairer) if
necessary.
xUse the protective cover and carton
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
xFor details regarding the installation
positions of the interior lights, refer
to the following:
Maintenance and Care
Owner Maintenance
6-44*Some models.