2019 LEXUS GS300H Owners Manual

569
8
8-2. Customization
Vehicle specifications
GS450h_300h_OM_OM30F92E_(EE)
■AHS (Adaptive High-beam System)*1 ( P. 241)
*1: If equipped
*2: Only high beam will be turned on or off.
FunctionDefault settingCustomized
setting
Adaptive High-beam Sys- temOnOff*2——O
Clearance between a vehi-cle ahead and the shaded
high beams
StandardNarrow——OWide
Vehicle speed at which the
brightness and illuminated area adjustment of the highbeams changes mode
Approximately 120 km/h
(75 mph) or more
Approximately 100 km/h (63 mph) or more——OApproximately
80 km/h (50 mph) or more
Intensity adjustment of thehigh beams when driving
around a curve (illuminates the area in the directionvehicle is turning more
brightly)
OnOff——O
Projection distance adjust- ment of the low beams
according to the distance to a preceding vehicle
OnOff——O
123

5708-2. Customization
GS450h_300h_OM_OM30F92E_(EE)
■Lexus parking assist-sensor*1, 2
*1:If equipped
*2: Refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MAN-
UAL”.
■Driving mode select switch (vehicles with Adaptive Variable Suspension
system) ( P. 312)
FunctionDefault
setting
Customized
setting
Detection distance of the front center sensorFarNearO—O
Detection distance of the rearcenter sensorFarNearO—O
Buzzer volume31 to 5O—O
Display setting
(when Lexus parking assist- sensor is operating)
All sensors displayedDisplay offO—O
123
FunctionDefaultsettingCustomized setting
Power train controlNormalPowerO——Eco
Chassis controlNormalSportO——
Air conditioning operationNormalEcoO——
123

571
8
8-2. Customization
Vehicle specifications
GS450h_300h_OM_OM30F92E_(EE)
■Automatic air conditioning system ( P. 346)
■Front seat heaters (without seat ventilators)* (P. 363)
*: If equipped
FunctionDefault
setting
Customized
setting
Switching between outside air and recirculated air modelinked to “AUTO” switch* oper-
ation
OnOffO—O
A/C Auto switch operationOnOffO—O
Exhaust gas sensor sensitivityStandard-3 to 3O—O
*: This is the switch for turning on and off the auto-
matic mode of the air conditioning system, not
the outside air or recirculated mode switch.
123
FunctionDefault
setting
Customized
setting
Automatic operation of front seat heaterOffOn——O
123

5728-2. Customization
GS450h_300h_OM_OM30F92E_(EE)
■Front seat heaters and ventilators*1/rear seat heaters*2 ( P. 362)
*1: If both are equipped
*2:If equipped
FunctionDefault
setting
Customized
setting
Adjustment of the front seat heater temperature or the ven-tilator fan speed during auto-
matic operation (individual seat adjustment available)
Level 3(standard)Level 1 (low) to level 5 (high)O—O
Adjustment of the rear seatheater temperature during
automatic operation (individual seat adjustment available)
Level 3
(standard)
Level 1 (low) to
level 5 (high)O—O
Rear seat heater start-up con- ditions when the power switch
is in ON mode (individual seat adjustment available)
OffOn (AUTO)O—O
123

573
8
8-2. Customization
Vehicle specifications
GS450h_300h_OM_OM30F92E_(EE)
■Illumination ( P. 366)
FunctionDefault
setting
Customized
setting
Interior lights illumination con- trolOnOff——O
Time elapsed before the inte-
rior lights turn off15 seconds7.5 secondsO—O30 seconds
Operation after the power switch is turned offOnOff——O
Operation when the doors are
unlockedOnOff——O
Operation when you approach the vehicle with the electronickey on your person (vehicles
with entry function)
OnOff——O
Footwell lightingOnOff——O
Outer foot lightsOnOff——O
Time elapsed before the outer
foot lights turn off15 seconds
Off
O—O7.5 seconds
30 seconds
Enable/disable operation of the outer foot lights when you
approach the vehicle with the electronic key on your person
OnOff——O
Enable/disable operation of theouter foot lights when the doors
are unlocked with the power door lock switch
OnOff——O
123

5748-2. Customization
GS450h_300h_OM_OM30F92E_(EE)
■Rear sunshade* ( P. 380)
*: If equipped
■Vehicle customization
●When the speed linked door locking function and shift position linked door locking function are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked. • If the vehicle is started with all the door s locked, the speed linked door locking func- tion would not operate.
• If the vehicle is started with any door un locked, the speed linked door locking func- tion will operate.
●When the entry function is off, the select ing doors to unlock cannot be customized.
●When the doors remain closed after unlocking the doors and the automatic door lock function (time elapsed before the automatic door lock function is activated if a door is
not opened after being unlocked) activates, the signals will be generated in accordance with the operation signal (buzzers) and the operation signal (emergency flashers) set-tings.
●Some settings can be changed using a switch or the Remote Touch screen. If a setting ischanged using a switch, the changed setting will not be reflected on the Remote Touchscreen until the power switch is turned off and then to ON mode.
■When customizing using the Remote Touch
Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P. Also, to prevent 12-volt battery discharge, leave the hybrid system operating while customiz-
ing the features.
FunctionDefault
setting
Customized
setting
Reverse operationOnOff——O
Time elapsed before the
reverse operation feature acti- vates0.7 seconds
0 second
——O0.9 seconds
1.2 seconds
WARNING
■During customization
As the hybrid system needs to be operating during customization, ensure that the vehi- cle is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
123

575
8
8-2. Customization
Vehicle specifications
GS450h_300h_OM_OM30F92E_(EE)
NOTICE
■During customization
To prevent 12-volt battery discharge, ensure that the hybrid system is operating while customizing features.

5768-3. Initialization
GS450h_300h_OM_OM30F92E_(EE)
Item to initialize
*: If equipped
The following item must be initialized for normal system operation after such
cases as the 12-volt battery being re connected, or maintenance being per-
formed on the vehicle:
ItemWhen to initializeReference
Oil maintenance• After the maintenance is per-
formedP. 408
Tire pressure warning system*
• When rotating the tires • When changing the tire inflationpressure by changing traveling
speed or load weight, etc.
P. 418