2019 Hyundai Tucson set clock

3-45
Convenient features of your vehicle
Closing the fuel filler door
1. To install the fuel tank cap, turn itclockwise until it “clicks” one time.
2. To close the fuel filler door, press the edge of the fuel filler door.
Make sure it is securely closed.
3
Petrol is highly flammable and
explosive. Failure to follow
these guidelines may result in
SERIOUS INJURY or DEATH:
•Read and follow all warnings
posted at the gas station.
• Before refuelling, note the
location of the Emergency
Petrol Shut-Off, if available, at
the gas station.
• Before touching the fuel noz-
zle, you should eliminate the
potential build-up of static
electricity by touching a metal
part of the vehicle, a safe dis-
tance away from the fuel filler
neck, nozzle, or other gas
source, with your bare hand.
(Continued)
WARNING
(Continued)
•Do not use mobile phones
whilst refuelling. Electric cur-
rent and/or electronic interfer-
ence from mobile phones can
potentially ignite fuel vapours
and cause a fire.
• Do not get back into a vehicle
once you have begun refu-
elling. You can generate a
build-up of static electricity by
touching, rubbing or sliding
against any item or fabric
capable of producing static
electricity. Static electricity
discharge can ignite fuel
vapours causing a fire. If you
must re-enter the vehicle, you
should once again eliminate
potentially dangerous static
electricity discharge by touch-
ing a metal part of the vehicle,
away from the fuel filler neck,
nozzle or other petrol source,
with your bare hand.
(Continued)(Continued)
•
When refuelling, always move
the shift lever to the P (Park)
position (for automatic
transaxle/
dual clutch trans-
mission) or first gear or R
(Reverse, for manual
transaxle), set the parking
brake, and place the ignition
switch to the LOCK/OFF posi-
tion. Sparks produced by elec-
trical components related to
the engine can ignite fuel
vapours causing a fire.
• When using an approved
portable fuel container, be
sure to place the container on
the ground prior to refuelling.
Static electricity discharge
from the container can ignite
fuel vapours causing a fire.
Once refuelling has begun,
contact between your bare
hand and the vehicle should
be maintained until the filling
is complete.
(Continued)
TLe UK 3a(~109).qxp 6/12/2018 2:24 PM Page 45

4-16
Multimedia System
(With Bluetooth®Wireless Technology)
■Type A ■Type B
❈ The actual features in the vehicle may differ from the illustration.
(7)
PRESET button
• Whilst listening to the radio, press to move to previous or next page of the
preset list.
(8) SETUP button/CLOCK button
• Press to access the setup screen.
• Press and hold to access the time setup screen.
(9) BACK button
• Press to return to the previous screen. (10)
MENU button
• Press to access the menu screen for the current mode.
(11) TUNE knob/FILE knob/ENTER
button
• Whilst listening to the radio, turn to adjust the frequency.
• Whilst playing media, turn to search for a track/file (except for the AUX and
Bluetooth audio modes).
• During a search, press to select the current track/file. (12)
Number buttons (1–6)
• Whilst listening to the radio, press to lis- ten to a saved radio station.
• Whilst listening to the radio, press and hold to save the current radio station to
the preset.
• Press the corresponding number but- ton to select an item.
TLe UK 4.qxp 5/10/2018 12:04 PM Page 16

4-20
Multimedia System
Turning the system on or off
To turn on the system, start the
engine.
• If you do not want to use the sys-tem whilst driving, you can turn off
the system by pressing the
[POWER] button on the control
panel. To use the system again,
press the [POWER] button again.
The system turns off when you stop
the engine (ACC Off).
• When you turn back on the sys- tem, the previous mode and set-
tings will remain intact.
Information
You can turn on the system when the
key ignition switch is placed in the
“ACC” or “ON” position. Using the
system for an extended period without
the engine running drains the battery.
If you plan on using the system for a
long time, start the engine.
Turning the display on or off
To prevent glare, you can turn off the
screen. The screen can be turned off
only whilst the system is on.
1. On the control panel, press the [SETUP/CLOCK] button.
2. On the control panel, press the [ 6]
button to select Display Off.
• To turn the screen back on, press any of the control panel
buttons.
i
•Some functions may be dis-
abled for safety reasons
whilst the vehicle is moving.
They work only when the vehi-
cle stops. Park your vehicle in
a safe location before using
any of them.
• Stop using the system if it
malfunctions, such as no
audio output or display. If you
continue using the system
when it is malfunctioning, it
may lead to a fire, electric
shock, or system failure.
WARNING
TLe UK 4.qxp 5/10/2018 12:04 PM Page 20

4-33
Multimedia System
4
Pairing devices with your system
For Bluetooth connections, first pair
your device with your system to add
it to the system’s list of Bluetooth
devices. You can register up to five
devices.
1. From the control panel, press the[SETUP/CLOCK] button, and then
select Bluetooth Connections.
• If you are pairing a device with your system for the first time,
you can also press the [PHONE]
button on the control panel or
the Call/Answer button on the
steering wheel.
2. On the Bluetooth device you want to connect, activate Bluetooth,
search for your vehicle’s system,
and then select it.
• Check the system’s Bluetoothname, which is displayed in the
new registration pop-up window
on the system screen. 3. Enter or confirm the passkey to
confirm the connection.
• If the passkey input screen isdisplayed on the Bluetooth
device screen, enter the
passkey ‘0000’ which is dis-
played on the system screen.
• If the 6-digit passkey is dis- played on the Bluetooth device
screen, ensure that the
Bluetooth passkey displayed on
the Bluetooth device is the same
as the passkey on the system
screen and confirm the connec-
tion from the device. 4. Choose whether or not to connect
the Bluetooth device to your sys-
tem prior to other devices.
• If you grant priority to theBluetooth device, it will be con-
nected automatically to the sys-
tem when you turn on the sys-
tem.
• The screen image in this manual is an example. Check your sys-
tem screen for the exact vehicle
name and Bluetooth device
name.
• The default passkey is ‘0000’.
• It may take a whilst for the sys- tem to connect with the device
after you permit the system to
access the device. When a con-
nection is made, the Bluetooth
status icon appears at the top of
the screen.
• You can change the permission settings via the mobile phone’s
Bluetooth settings menu. For
more details, refer to your
mobile phone’s user guide.
(Continued)
NOTICE
TLe UK 4.qxp 5/10/2018 12:05 PM Page 33

4-34
Multimedia System
(Continued)
• To register a new device, repeat steps 1 to 4.
• When a device is connected to the system via Bluetooth, you
cannot pair another device.
• If you use the automatic Bluetooth connection function,
a call may be switched to the
vehicle’s Handsfree when you
are taking on the phone near the
vehicle whilst the vehicle’s
engine is on. If you do not want
the system to connect with the
device automatically, deactivate
Bluetooth on your device.
• When a device is connected to the system via Bluetooth, the
device’s battery may discharge
faster.
Connecting a paired device
To use a Bluetooth device on your
system, connect the paired device to
the system. Your system can connect
with only one device at a time.
1. From the control panel, press the [SETUP/CLOCK] button, and then
select Bluetooth Connections.
• If there is no connected device, press the [PHONE] button on
the control panel or the
Call/Answer button on the steer-
ing wheel.
2. Turn the [TUNE] knob to select the device to connect, and then press
the knob.
• If another device is already con-nected to your system, discon-
nect it. Select the connected
device to disconnect.
3. Turn the [TUNE] knob to select Connect, and then press the
knob. • If a connection ends because a
device is out of the connection
range or a device error occurs,
the connection will be restored
automatically when the device
enters the connection range or
when the error is cleared.
• The Bluetooth connection is unavailable when the device’s
Bluetooth function is turned off.
Be sure to turn on the device’s
Bluetooth function.
• Depending on auto connection priority, connection to a device
may take time.
NOTICE
TLe UK 4.qxp 5/10/2018 12:05 PM Page 34

4-35
Multimedia System
4
Disconnecting a device
If you want to stop using a Bluetooth
device or connect another device,
disconnect your currently connected
device.
1. From the control panel, press the[SETUP/CLOCK] button, and then
select Bluetooth Connections.
2. Turn the [TUNE] knob to select the device to disconnect, and then
press the knob.
3. Turn the [TUNE] knob to select Disconnect, and then press the
knob.
Deleting paired devices
If you no longer want a Bluetooth
device paired or if you want to con-
nect a new device when the
Bluetooth device list is full, delete
paired devices.
1. From the control panel, press the[SETUP/CLOCK] button, and then
select Bluetooth Connections.
2. Turn the [TUNE] knob to select the device to delete, and then press
the knob.
3. Turn the [TUNE] knob to select Delete, and then press the knob.
• When you delete a paired device, the Call history and
Contacts stored in the system
are also deleted.
• To re-use a deleted device, you must pair the device again.
Using a Bluetooth audio
device
You can listen to music stored in the
connected Bluetooth audio device
via your vehicle’s speakers.
On the control panel, press the
[MEDIA] button.
• If you have multiple media storagedevices, press the [MEDIA] button
and press the [2] button to select
BT Audio from the media selection
window.
(1) Repeat play mode
(2) Information about the song cur- rently playing
NOTICE
TLe UK 4.qxp 5/10/2018 12:05 PM Page 35

4-43
Multimedia System
4
Display
You can change the settings related
to the system display.
On the control panel, press the
[SETUP/CLOCK] [1] buttons to
select Display.
• Dimming mode (Mode): Set the
screen brightness to be adjusted
automatically according to the
headlight use or set the screen to
stay bright or dark continuously.
• Brightness (Illumination): Adjust
the brightness for the day or night
mode according to your setting in
the Dimming mode (Mode)
option.
• Screensaver: Select a screen
saver option to be displayed when
the system is turned off.
• Scroll text (Text Scroll) (if
equipped): Set to scroll text when
information text is too long to dis-
play all on the screen. The text scroll function (if
equipped) is only available in the
following situation:
• When displaying titles in the
USB/iPod/Bluetooth audio modes.
Sound
You can change the settings related
to sounds, such as location where
sound will be concentrated and the
output level for each range.
On the control panel, press the
[SETUP/CLOCK] [2] buttons to
select Sound.
• Position: Select a location where
sound will be concentrated in the
vehicle. Select Fade(Fader) or
Balance, turn the [TUNE] knob to
select the desired position, and
then press the knob. To set sound
to be centred in the vehicle, select
Centre.
• Equaliser (Tone): Adjust the out-
put level for each sound tone
mode.
•Speed dependent volume con-
trol (Speed Dependent Volume ):
Set the volume to be adjusted
automatically according to your
driving speed.
• Rear parking sensors prioritised
(Back-up Warning Priority ): Set
to decrease the audio volume to
hear a reverse warning prior to
other sounds whilst reversing your
vehicle.
• Depending on vehicle models or specifications, available options
may vary.
• Depending on the system or amplifier specifications applied
to your vehicle, available
options may vary.
NOTICE
NOTICE
SETUP
TLe UK 4.qxp 5/10/2018 12:05 PM Page 43

4-44
Multimedia System
Date/Time
You can change the date and time
that are shown on the system dis-
play.
On the control panel, press the
[SETUP/CLOCK] [3] buttons to
select Date/Time.
• Set date: Set date to display on the
system display.
• Set time: Set time to display on the
system display.
• Time format: Select to display
time in the 12 hour format or the 24
hour format.
Bluetooth
You can change the settings for
Bluetooth connections.
On the control panel, press the
[SETUP/CLOCK] [4] buttons to
select Bluetooth.
• Connections: Pair new Bluetooth
devices with your system, or con-
nect or disconnect a paired device.
You can also delete paired devices.
• Auto connection priority : Select
a paired device to connect to your
system automatically when it turns
on.
• Update contacts (Download
Contacts): Download the contacts
list from the connected mobile
phone.
• Bluetooth voice guidance (if
equipped): Turn on or off the voice
guidance for Bluetooth pairing,
connection, and errors. • If no Bluetooth device is con-
nected, the Update contatcts
(Download Contacts) menu is
disabled.
• If the system language is select- ed to Slovakian or Hungarian,
Bluetooth voice guidance menu
is disabled.
System
You can change the display lan-
guage or initialise system settings.
On the control panel, press the
[SETUP/CLOCK] [5] buttons to
select System.
• Language: Change the display
language.
• Default: Reset your system set-
tings to the default values. All user
data stored in the system will also
be deleted.
NOTICE
TLe UK 4.qxp 5/10/2018 12:05 PM Page 44