2018 TOYOTA MIRAI Owners Manual (in English)

15
Push lever to move steering wheel:
- up, down to adjust angle,
- left, right to adjust length (toward driver and away from driver.)
NOTE: Do not attempt to adjust while the vehicle is in motion.
Length
Angle
Tilt & telescopic steering wheel
Door locks
Unlock
Lock
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Suitable for driving that requires strong regenerative braking, such as \
down-hill
driving, etc. To select Br mode, shift the shift lever down.
Pull
BR (ENGINE BRAKE) MODE

16
FEATURES & OPERATIONSSeat adjustments-Front
Seats-Head restraints
DRIVER’S SIDE
Note: Be careful to not allow the head rest to touch the ceiling.
Seatback angle
Lumbar support
Vertical heightSeat cushion (front) angle
Seat position
(forward/backward)
Front vertical adjust Front horizontal adjust
Lock release button
Rear vertical adjust
Lock release button
Rear passenger seat
Touch switch to change temperature intensity. Push button to change temperature intensity. Depress again and light indicates
heater is off.
Push
Push
Front seat
Touch
HighLowOff
Seat heaters

17
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Lane Departure Alert (LDA)
While driving on a road that has visible lane markers, this system is de\
signed to
recognize lane markers using a camera sensor and alerts the driver when \
the
vehicle deviates from its lane.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
Press the LDA switch (in steering wheel) to turn the LDA system ON, th\
e indicator
will illuminate. Press again to turn OFF.
When the inside of both lane lines turn white:
- Indicates that both right and left lane markers are recognized.
When the inside of either lane line turns white:
- Indicates that the lane marker on the white-marked side is recognized.\
When the inside of both lane lines are black:
- Indicates that no lane markers are recognized or the LDA system is tem\
porarily
canceled.
Camera sensor
Press to ON Multi-Information Display
TURNING THE LDA SYSTEM ON
INDICATION ON THE MULTI-INFORMATION DISPLAY (MID)

18
FEATURES & OPERATIONSPre-Collision System (PCS)
When a high possibility of a frontal collision is detected by the radar \
sensor, a
buzzer sounds and a message urging the driver to take evasive action app\
ears on
the multi-information display. If the driver then applies brakes, the s\
ystem applies
greater brake force in relation to how strongly the brake pedal is depre\
ssed. If
the system determines that a collision is unavoidable, the brakes are au\
tomatically
applied to reduce the collision speed. The system is enabled each time t\
he power
switch is turned to ON mode.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
Each time the Pre-Collision System switch is pressed, the response to th\
e distance
changes as follows:
Press the PCS switch for 3 seconds or more.
Far
Near
Middle
(default setting)
CHANGING THE PRE-COLLISION WARNING TIMING
DISABLING THE PRE-COLLISION SYSTEM

19
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Blind Spot Monitor with Rear Cross Traffic
Alert (BSM w/RCTA)
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the \
decision when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when bac\
king up)
The system is designed to use radar sensors to detect vehicles traveling\
in the
Mirai’s blind spot and advises the driver of the vehicles’ presenc\
e via the outside
rear view mirror indicator
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
To turn ON (activate)/OFF (deactivate) from multi-information display,
select
.
Outside rear view mirror indicators
Rear cross Traffic Alert buzzer
TURN THE BSM SYSTEM ON

20
FEATURES & OPERATIONS
OPERATING WIPER LEVER
Pull to wash and wipe
Select AUTO to increase or
decrease sensor sensitivity.
* When AUTO is selected, wipers will operate
automatically when sensor detects falling
rain.
Increase
Decrease
Single wipe
Interval wipe* Slow
Fast Off
Windshield wipers & washer
Automatic High Beams (AHB)
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the headlights of oncoming vehicles and the \
taillights of
preceding vehicles and is designed to automatically turn high beams on o\
r off as
necessary.
To turn the high beams on/off manually, pull the lever to the original position or
press the switch.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
1) Activate the system
2) Press the Automatic High Beam switch

21
TURN SIGNALS
HEADLIGHTS
Right turn
Lane change
Lane change Left turn
Headlights
Parking lights Auto or OFF
DRL OFF
Windows-Power
Up
Window lock switch
Automatic operation Push the switch completely down or pull it completely
up and release to fully open or close. To stop the window partway, opera\
te the
switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
Down
High beam flasher
High beam
Auto High Beam* or
Low beam
Daytime Running Light system (DRL)
Automatically turns on the headlights at a
reduced intensity on some models. Automatic light cut off system Automatically turns lights off after a delay of 30
seconds, or the lock switch on remote is pushed after all doors are lock\
ed.
Automatic High Beam (AHB) system Automatically switches between high and low beams as appropriate to provide the most light possible and enha\
nce
forward visibility. Refer to the Owner’s Manual for more details on the Automatic
High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detai\
ls.
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Lights & turn signals

22
Automatic air conditioning system
FEATURES & OPERATIONS
Touch and slide up/down
to adjust temperature
Airflow mode
When adjusting the temperature setting a sound buzzes and automatically \
sets
temperature, fan outlet and speed.

*Turns off automatically after 30 minutes
Automatic air
Fan speed (Slower) Fan speed (Faster)
Airflow mode
Rear defogger
System OFF
Air conditioning ON/OFF
Synchronize
temperature
Driver seat heater
Heated steering wheel* Windshield wiper de-icer
Passenger seat heater
Eco heat/cool mode
Windshield defogger Outside air (indicator off)/
Recirculated mode