20
FEATURES & OPERATIONS
OPERATING WIPER LEVER
Pull to wash and wipe
Select AUTO to increase or
decrease sensor sensitivity.
* When AUTO is selected, wipers will operate
automatically when sensor detects falling
rain.
Increase
Decrease
Single wipe
Interval wipe* Slow
Fast Off
Windshield wipers & washer
Automatic High Beams (AHB)
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the headlights of oncoming vehicles and the \
taillights of
preceding vehicles and is designed to automatically turn high beams on o\
r off as
necessary.
To turn the high beams on/off manually, pull the lever to the original position or
press the switch.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
1) Activate the system
2) Press the Automatic High Beam switch
21
TURN SIGNALS
HEADLIGHTS
Right turn
Lane change
Lane change Left turn
Headlights
Parking lights Auto or OFF
DRL OFF
Windows-Power
Up
Window lock switch
Automatic operation Push the switch completely down or pull it completely
up and release to fully open or close. To stop the window partway, opera\
te the
switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
Down
High beam flasher
High beam
Auto High Beam* or
Low beam
Daytime Running Light system (DRL)
Automatically turns on the headlights at a
reduced intensity on some models. Automatic light cut off system Automatically turns lights off after a delay of 30
seconds, or the lock switch on remote is pushed after all doors are lock\
ed.
Automatic High Beam (AHB) system Automatically switches between high and low beams as appropriate to provide the most light possible and enha\
nce
forward visibility. Refer to the Owner’s Manual for more details on the Automatic
High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detai\
ls.
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Lights & turn signals
