2018 Peugeot iOn turn signal

9
Warning/indicator lampStateCause Action/Observations
Main batter y
charge (normal or
fast) Fixed.
The main battery is being
charged. The lamp goes out once charging is complete.
Flashing. The recharging cable is
connected to the vehicle's
socket, but the main battery is
not being charged. Check the recharging cable connection.
Ancillaries battery
charge Fixed.
The ancillaries battery charging
circuit has a fault (dirty or loose
terminals, converter fault, etc.). The warning lamp should go off when the engine is
started.
If it does not go off, contact a PEUGEOT dealer or a
qualified workshop.
Front seat belt
not fastened/
unfastened Fixed, then flashing,
accompanied by an
audible signal. The driver and/or front
passenger has not fastened or
has unfastened their seat belt. Pull the strap then insert the tongue in the buckle.
Rear right seat
belt unfastened Fixed.
The rear right passenger has
unfastened their seat belt. Pull the strap then insert the tongue in the buckle.
Rear left seat belt
unfastened Fixed.
The rear left passenger has
unfastened their seat belt. Pull the strap then insert the tongue in the buckle.
Airbags Temporarily on. This warning lamp comes on for
a few seconds when you turn on
the ignition, then goes off. If it does not go off, contact a PEUGEOT dealer or a
qualified workshop.
Fixed. One of the airbag or seat
belt pyrotechnic pretensioner
systems has a fault. Have them checked by a PEUGEOT dealer or a
qualified workshop.
Red warning/indicator lamps
1
Dashboard instruments

13
Warning/indicator lampStateCause Action/Observations
Left-hand direction
indicator Flashing with audible
signal. The lighting control stalk has been moved
down.
Right-hand
direction indicator Flashing with audible
signal. The lighting control stalk has been moved
up.
Hazard warning
lamps Flashing with audible
signal. The hazard warning lamps switch, located
on the dashboard, has been operated.
The left-hand and right-hand direction indicators and
their associated lamps flash simultaneously.
Sidelamps and/
or dipped beam
headlampsFixed.
The sidelamps and/or dipped beam
headlamps have been switched on.
Front foglamps Fixed. The front foglamps have been switched on
using the ring on the lighting control stalk. Turn the ring on the lighting control stalk
twice rear wards to switch off the front
foglamps.
Main beam
headlamps Fixed.
The lighting control stalk has been pulled
towards you. Pull the lighting control stalk to return to
dipped beam headlamps.
Motor braking
reduction Flashing.
The main battery is fully charged, the motor
braking is temporarily reduced. Anticipate when you need to brake: use
the brake pedal to slow down or stop the
vehicle.
Ready
(ready to drive)
Fixed, accompanied by
an audible signal when
it comes on.The vehicle is ready to drive, you can
operate the accelerator now.
The lamp stays on as long as the vehicle is
powered up.
Green warning/indicator lamps
Black warning/indicator lamps Blue warning/indicator lamps
1
Dashboard instruments

41
Front and rear foglamps
Foglamps selection ring.
They operate with the sidelamps and dipped or
main beam headlamps.Front and rear foglamps:
F

T
urn the ring for wards once to switch on the
front foglamps.
F

T
urn the ring for wards twice to switch on the
rear foglamp.
F

T
urn the ring backwards once to switch off
the rear foglamp.
F

T
urn the ring backwards twice to switch off
the front foglamps. It is prohibited to switch on the front or
rear foglamps in fine weather or in rain,
night or day. In these situations, the power
of their beams may dazzle other drivers.
Do not forget to switch off the front
foglamps and the rear foglamp when they
are no longer necessary.
When lighting is left on
When the driver's door is opened, with the
ignition off, an audible signal warns the
driver that the vehicle's lighting is left on.
In this case, switching off the lighting
stops the audible signal.
Direction indicators
(flashing)The ring automatically returns to its initial
position.
The rear foglamp switches off automatically
when you switch off the sidelamps and dipped
or main beam headlamps.
F

L
eft: lower the lighting control stalk passing
the point of resistance.
F

R
ight: raise the lighting control stalk passing
the point of resistance.
Daytime running lamps
Specific daytime lighting to make the vehicle
more visible.
The daytime running lamps light up
automatically when the engine starts if no other
lamps are on.
They cannot be deactivated.
Although these lamps are located in the
same lamp unit as the front foglamps, they
operate with a specific bulb.
Their use complies with the Highway
Code.
4
Lighting and visibility

69
Starting
F Check that the drive selector is in position P.
F I nsert the key in the ignition switch.
F

T
urn the key to position 4 (S TA R T ) .
F

H
old the key in that position
for a few seconds until the
" RE ADY " indicator lights up and
an audible signal sounds.
F

R
elease the key.
The switch will automatically return to
position 3 (ON) .
Switching off
F Immobilise the vehicle.
F
K eep your foot on the brake pedal.
F

P
lace the drive selector in position P .
F

A
pply the parking brake.
F

T
urn the key to position 1 (LOCK) .
F

R
emove the key from the ignition switch.
Avoid attaching heavy objects to the key,
which would weigh down on its blade
in the ignition switch and could cause a
malfunction.
Parking brake
Application
F Pull the parking brake lever fully up to immobilise your vehicle.
Release
F Pull the parking brake lever up gently, press the release button then lower the lever fully.
When the vehicle is moving, if the
brake remains applied or is not fully
released, this warning lamp comes on.
When parking on a slope, direct your
wheels against the kerb, apply the parking
brake, put the drive selector in position P
and switch off the ignition.
Drive selector
Selector positions
P. Park.
This position allows you to start the
vehicle.
To exit position P , you must have your
foot on the brake.
R. Reverse.
N. Neutral.
D. Drive (forward).
Displays in the instrument panel
When you move the drive selector in the gate
to select a position, the corresponding symbol
appears in the instrument panel.
6
Driving