2018 Peugeot iOn sensor

12
Under-inflationFixed. The pressure in one or more of
the tyres is too low. Check the pressure in the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after adjusting one or
more tyre pressures and after changing one or more
wheels.
For more information on Tyre under-inflation
detection
, refer to the corresponding section.
Flashing, then fixed. The function is faulty and/or at
least one of the wheels has no
sensor detected. Tyre pressure monitoring is no longer ensured.
Have the system checked by a Peugeot dealer or a
qualified workshop.
Warning/indicator lamp
StateCause Action/Observations
Main electrical
system self-
diagnostic system Fixed.
Fault in the main electrical
system. You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Passenger's airbag
system Fixed, in the central
console.
The control switch, located in the
glove box or in the central console
(depending on equipment), is set
to the "
OFF" position.
The passenger's front airbag is
deactivated.Set the control switch to the " ON" position to activate
the passenger's front airbag.
In this case, do not install a "rear ward facing" child
seat on the front passenger seat.
Remember to check the status of this control switch
before starting your vehicle.
Rear foglamp Fixed. The rear foglamp has been
switched on using the ring on the
lighting control stalk. Turn the ring on the lighting control stalk to the rear to
switch off the rear foglamp.
Dashboard instruments

18
Choice of set of tyres fitted
If you have registered a second set of tyres
with sensor, after every change, select the
corresponding set in the instrument panel
display screen.
The procedure for this is as follows.
F
P
ress button A to select the system.
F

P
ress and hold button A for more than ten
seconds to move from tyre set 1 to tyre
set
2 in succession or vice versa.
Range indicator
This function provides you with an estimated
range that your vehicle can still travel, taking
into account your recent conditions of use
(driving style, use of heating, air conditioning,
e t c .) .When the remaining range is too low, " ---"
is displayed in the instrument panel.
The remaining range can be displayed in
miles or kilometres.
For more information on the distance
recorder , and the unit change in
particular, refer to the corresponding
section.
Dashboard instruments

42
Automatic illumination/
switching off of the headlamps
Automatic illumination
When the lighting control stalk ring is in
the AUTO position, the sidelamps and
dipped beam headlamps are switched on
automatically, without any action on the part of
the driver, when a low level of ambient light is
detected.
As soon as the level of light becomes sufficient
again, the lights are switched off automatically.
The sensor is located at the bottom of the
windscreen.
Do not cover the sunshine sensor, as the
associated functions would no longer be
controlled.
In fog or snow, the sunshine sensor may
detect sufficient light. The headlamps may
not come on automatically.
Automatic switching off
When the lighting control stalk is in the "AUTO"
position, if the ignition key is in the "LOCK" or
"ACC" position or is removed, the headlamps
will automatically switch off when the driver's
door is opened .
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams must be adjusted according to the load
in the vehicle.
0.Driver only or driver + 1 front
passenger.
1 or 2. 4 passengers (including driver).
3. 4 passengers (including driver) +
maximum authorised load.
4. Driver + maximum authorised load.
The initial setting is position " 0".
Wiper control stalk
The wipers are controlled directly by the driver
using control A and ring B .
In wintry conditions, remove snow, ice
or frost present on the windscreen,
around the wiper arms and blades and
the windscreen seal before operating the
wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Lighting and visibility

70
Starting the vehicle
With the engine running, P appears on the
instrument panel display screen.
F
P
ress the brake pedal to exit position P .
F

S
elect for ward drive ( D) or reverse ( R).
F

R
elease the parking brake.
Switching off the vehicle
To switch off the engine, select position P .
You must without fail apply the parking brake to
immobilise the vehicle.
To remove the key from the ignition, the drive
selector must be in position P .
To tow your vehicle, the drive selector
must be in position N .
For more information on Towing the
vehicle , refer to the corresponding
section.
Tyre under-inflation
detection
System which automatically checks the
pressures of all four tyres from when the
ignition is switched on.
The pressure sensors are located in the valves
of each tyre.
The system triggers an alert as soon as
it detects a drop in the pressure of one or
more tyres by comparison with the reference
pressure stored in the system. This reference
pressure must be reinitialised after every tyre
pressure adjustment or wheel change.
The system operates provided that the
sensor identifiers have been first logged by a
PEUGEOT dealer or a qualified workshop.
You can log two sets of tyres (for example:
wheels with "all weather" tyres and wheels with
"winter" tyres).
The tyre under-inflation detection system
is a driving aid which does not replace the
need for vigilance on the part of the driver.
F Take your foot off the brake pedal, and the vehicle will move at a low speed to make
manoeuvring easier.
F

A
ccelerate to move for ward or backward.
F
"D " or " R" appears on the instrument panel
display screen.
Driving

71
This system still requires you to check the
tyre inflation pressure every month as well
as before a long journey.
Driving with under-inflated tyres impairs
handling, extends braking distances and
causes premature tyre wear, particularly
in adverse conditions (heavy loads, high
speeds, long journeys).Driving with under-inflated tyres
increases fuel consumption.
The tyre pressure specifications for your
vehicle can be found on the tyre pressure
label.
For more information on the
Identification markings , refer to the
corresponding section.
Tyre pressures should be checked when
the tyres are "cold" (vehicle stopped for
1
hour or after a journey of less than
6
miles (10 km) at moderate speeds).
Other wise, add 0.3
bar to the values
indicated on the label.Under-inflation alert
This is indicated by the fixed
illumination of this warning
lamp.
F

R

educe speed immediately, avoid excessive
steering movements and sudden braking.
F

S

top as soon as it is safe to do so.
Detection of loss of pressure does not
always bring about a visible deformation
of the tyre. Do not make do with just a
visual check.
F

C

heck the pressures of the four tyres
when "cold" using the compressor from the
temporary puncture repair kit.
If it is not possible to carry out this check
straight away, drive carefully at reduced
speed.
or
F

I

n case of a puncture, use the temporary
puncture repair kit. The alert persists until the reference
pressure values are reinitialised once the
tyre or tyres concerned are reinflated,
repaired or replaced. In case of tyre repair
or replacement, the sensor identifiers
must be logged by a PEUGEOT dealer or
a qualified workshop.
Resetting the reference
pressures
The system must be reinitialised after any
adjustment to the pressures of one or more
tyres, and after changing one or more wheels.
Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the tyre
pressure label.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
6
Driving

72
Reinitialisation of the system is done via the
display screen of the instrument panel, with the
ignition on and the vehicle stationary.
F
P
ress button A to select the system.
F

T
o reinitialise the under-inflation detection
system press button A and hold it down for
at least 3
seconds.
The flashing of the warning lamp in the
instrument panel confirms that the system has
been reinitialised.
The warning lamp will then go off after driving
for about a hundred metres.
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
Malfunction
The flashing and then fixed
illumination of the under-inflation
warning lamp indicates a fault with
the system.
In this case, the pressure in the tyres is no
longer monitored.
This alert is also displayed if:
-

o

ne or more wheels is not fitted with a
sensor,
-

t

here is a wireless device using the same
frequency near the vehicle,
-

t

here is snow or ice build-up in the wings or
in the rims,
-

t

he tyre pressure monitoring system battery
charge level is insufficient,
-

t

he wheel sensor identifiers have not been
logged by a PEUGEOT dealer or a qualified
workshop.
Go to a PEUGEOT dealer or a qualified
workshop
to have the system checked or,
following a puncture, to have the original
wheel, equipped with a sensor, refitted
with a tyre. Any tyre repair or replacement on a wheel
fitted with this system must be carried
out by a PEUGEOT dealer or a qualified
workshop.
If you fit the second set of tyres stored
in the system, the malfunction alert will
appear until this second set is selected in
the configuration menu.
Managing sets of tyres
If you have registered a second set of tyres with
a PEUGEOT dealer or a qualified workshop,
every time the set of tyres is changed (e.g.
"winter" tyre), select the set you have just
installed in the configuration menu.
Once the new set has been fitted, check
and adjust the pressure to the value stated
on the tyre pressure label.
For more information on the
Identification markings , refer to the
corresponding section.
The other set of tyres is selected via the
instrument panel display screen, with the
ignition on and the vehicle stationary.
Driving