2018 Peugeot iOn low beam

13
Warning/indicator lampStateCause Action/Observations
Left-hand direction
indicator Flashing with audible
signal. The lighting control stalk has been moved
down.
Right-hand
direction indicator Flashing with audible
signal. The lighting control stalk has been moved
up.
Hazard warning
lamps Flashing with audible
signal. The hazard warning lamps switch, located
on the dashboard, has been operated.
The left-hand and right-hand direction indicators and
their associated lamps flash simultaneously.
Sidelamps and/
or dipped beam
headlampsFixed.
The sidelamps and/or dipped beam
headlamps have been switched on.
Front foglamps Fixed. The front foglamps have been switched on
using the ring on the lighting control stalk. Turn the ring on the lighting control stalk
twice rear wards to switch off the front
foglamps.
Main beam
headlamps Fixed.
The lighting control stalk has been pulled
towards you. Pull the lighting control stalk to return to
dipped beam headlamps.
Motor braking
reduction Flashing.
The main battery is fully charged, the motor
braking is temporarily reduced. Anticipate when you need to brake: use
the brake pedal to slow down or stop the
vehicle.
Ready
(ready to drive)
Fixed, accompanied by
an audible signal when
it comes on.The vehicle is ready to drive, you can
operate the accelerator now.
The lamp stays on as long as the vehicle is
powered up.
Green warning/indicator lamps
Black warning/indicator lamps Blue warning/indicator lamps
1
Dashboard instruments

41
Front and rear foglamps
Foglamps selection ring.
They operate with the sidelamps and dipped or
main beam headlamps.Front and rear foglamps:
F

T
urn the ring for wards once to switch on the
front foglamps.
F

T
urn the ring for wards twice to switch on the
rear foglamp.
F

T
urn the ring backwards once to switch off
the rear foglamp.
F

T
urn the ring backwards twice to switch off
the front foglamps. It is prohibited to switch on the front or
rear foglamps in fine weather or in rain,
night or day. In these situations, the power
of their beams may dazzle other drivers.
Do not forget to switch off the front
foglamps and the rear foglamp when they
are no longer necessary.
When lighting is left on
When the driver's door is opened, with the
ignition off, an audible signal warns the
driver that the vehicle's lighting is left on.
In this case, switching off the lighting
stops the audible signal.
Direction indicators
(flashing)The ring automatically returns to its initial
position.
The rear foglamp switches off automatically
when you switch off the sidelamps and dipped
or main beam headlamps.
F

L
eft: lower the lighting control stalk passing
the point of resistance.
F

R
ight: raise the lighting control stalk passing
the point of resistance.
Daytime running lamps
Specific daytime lighting to make the vehicle
more visible.
The daytime running lamps light up
automatically when the engine starts if no other
lamps are on.
They cannot be deactivated.
Although these lamps are located in the
same lamp unit as the front foglamps, they
operate with a specific bulb.
Their use complies with the Highway
Code.
4
Lighting and visibility

42
Automatic illumination/
switching off of the headlamps
Automatic illumination
When the lighting control stalk ring is in
the AUTO position, the sidelamps and
dipped beam headlamps are switched on
automatically, without any action on the part of
the driver, when a low level of ambient light is
detected.
As soon as the level of light becomes sufficient
again, the lights are switched off automatically.
The sensor is located at the bottom of the
windscreen.
Do not cover the sunshine sensor, as the
associated functions would no longer be
controlled.
In fog or snow, the sunshine sensor may
detect sufficient light. The headlamps may
not come on automatically.
Automatic switching off
When the lighting control stalk is in the "AUTO"
position, if the ignition key is in the "LOCK" or
"ACC" position or is removed, the headlamps
will automatically switch off when the driver's
door is opened .
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams must be adjusted according to the load
in the vehicle.
0.Driver only or driver + 1 front
passenger.
1 or 2. 4 passengers (including driver).
3. 4 passengers (including driver) +
maximum authorised load.
4. Driver + maximum authorised load.
The initial setting is position " 0".
Wiper control stalk
The wipers are controlled directly by the driver
using control A and ring B .
In wintry conditions, remove snow, ice
or frost present on the windscreen,
around the wiper arms and blades and
the windscreen seal before operating the
wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Lighting and visibility