24
Front seats
Manual adjustments
1.Adjusting the height of the head restraint.
2. Adjusting the seat backrest angle.
Operate the control lever and adjust the
position of the backrest for wards or
backwards.
3. Adjusting the height of the driver's seat
cushion.
Raise or lower the control lever the
number of times required to obtain the
desired position.
4. Seat forwards-backwards adjustment.
Raise the control bar and slide the seat
forwards or backwards.
Adjusting the height of the head
restraintNever drive with the head restraints
removed and in the vehicle, they may
become projectiles in severe braking
situations - they must always be in place
and properly adjusted.
After installing the head restraint, make
sure that the height adjustment button has
properly locked in place.
The adjustment is correct when the top of
the head restraint is aligned with the top of
the head of the person seated.
Heated seat control
Press the switch on the dashboard to turn on
the driver's seat heating.
The indicator lamp in the switch comes on.
The temperature is controlled automatically.
Pressing a second time stops operation.
F
T
o raise it, pull it upwards.
F
T
o lower it, push it down while pressing the
height adjustment button.
F
T
o remove it, move it to the high position,
then remove it while pressing the height
adjustment button.
F
T
o replace it, engage the head restraint
rods in the holes while pressing the height
adjustment button.
Ease of use and comfort
25
When the seat and passenger
compartment have reached an adequate
temperature, you can switch off the
function; reducing the consumption
of electrical current reduces fuel
consumption.
Do not use the function when the seat is
e m pt y.
Prolonged use is not recommended for
those with sensitive skin.
There is a risk of burns for people whose
perception of heat is impaired (illness,
taking medication, etc.).
There is a risk of overheating the system if
material with insulating properties is used,
such as cushions or seat covers.
Do not use the system:
-
i
f wearing damp clothing,
-
i
f child seats are fitted.
To avoid breaking the heating element in
the seat:
-
d
o not place heavy objects on the seat,
-
d
o not kneel or stand on the seat,
-
d
o not place sharp objects on the seat,
-
d
o not spill liquids onto the seat.
To avoid the risk of short-circuit:
-
d
o not use liquid products for cleaning
the seat,
-
n
ever use the heating function when
the seat is damp.Rear seats
Bench seat consisting of two adjustable and
foldable backrests and a fixed seat cushion.
Rear head restraints
Never drive with passengers seated at
the rear while the head restraints are
removed; they must be in place and in the
high position.
Adjusting the seat backrest
angle
Always check that the backrest is fixed
properly.
These have a high position (for comfort and
better safety) and a low position (to give the
driver better rear visibility).
They can also be removed.
To remove a head restraint:
F
p
ull the head restraint fully upwards,
F
t
hen press on the lug. To adjust the backrest:
F
p
ull the control for wards to release the
backrest.
F
a
djust the backrest, then release the
control.
There are seven possible adjustment notches
for adjusting the angle.
3
Ease of use and comfort
