2018 Peugeot iOn remove seats

24
Front seats
Manual adjustments
1.Adjusting the height of the head restraint.
2. Adjusting the seat backrest angle.
Operate the control lever and adjust the
position of the backrest for wards or
backwards.
3. Adjusting the height of the driver's seat
cushion.
Raise or lower the control lever the
number of times required to obtain the
desired position.
4. Seat forwards-backwards adjustment.
Raise the control bar and slide the seat
forwards or backwards.
Adjusting the height of the head
restraintNever drive with the head restraints
removed and in the vehicle, they may
become projectiles in severe braking
situations - they must always be in place
and properly adjusted.
After installing the head restraint, make
sure that the height adjustment button has
properly locked in place.
The adjustment is correct when the top of
the head restraint is aligned with the top of
the head of the person seated.
Heated seat control
Press the switch on the dashboard to turn on
the driver's seat heating.
The indicator lamp in the switch comes on.
The temperature is controlled automatically.
Pressing a second time stops operation.
F

T

o raise it, pull it upwards.
F

T

o lower it, push it down while pressing the
height adjustment button.
F

T

o remove it, move it to the high position,
then remove it while pressing the height
adjustment button.
F

T

o replace it, engage the head restraint
rods in the holes while pressing the height
adjustment button.
Ease of use and comfort

25
When the seat and passenger
compartment have reached an adequate
temperature, you can switch off the
function; reducing the consumption
of electrical current reduces fuel
consumption.
Do not use the function when the seat is
e m pt y.
Prolonged use is not recommended for
those with sensitive skin.
There is a risk of burns for people whose
perception of heat is impaired (illness,
taking medication, etc.).
There is a risk of overheating the system if
material with insulating properties is used,
such as cushions or seat covers.
Do not use the system:
-

i
f wearing damp clothing,
-

i
f child seats are fitted.
To avoid breaking the heating element in
the seat:
-

d
o not place heavy objects on the seat,
-

d
o not kneel or stand on the seat,
-

d
o not place sharp objects on the seat,
-

d
o not spill liquids onto the seat.
To avoid the risk of short-circuit:
-

d
o not use liquid products for cleaning
the seat,
-
n

ever use the heating function when
the seat is damp.Rear seats
Bench seat consisting of two adjustable and
foldable backrests and a fixed seat cushion.
Rear head restraints
Never drive with passengers seated at
the rear while the head restraints are
removed; they must be in place and in the
high position.
Adjusting the seat backrest
angle
Always check that the backrest is fixed
properly.
These have a high position (for comfort and
better safety) and a low position (to give the
driver better rear visibility).
They can also be removed.
To remove a head restraint:
F
p
ull the head restraint fully upwards,
F
t
hen press on the lug. To adjust the backrest:
F

p
ull the control for wards to release the
backrest.
F

a
djust the backrest, then release the
control.
There are seven possible adjustment notches
for adjusting the angle.
3
Ease of use and comfort

56
Advice
For the airbags to be fully effective,
observe the safety recommendations
below.
Adopt a normal and upright sitting position.
Wear a correctly adjusted seat belt.
Do not leave anything between the occupants
and the airbags (a child, pet, object, etc.), nor
fix or attach anything close to or in the way of
the airbag release trajectory; this could cause
injuries during their deployment.
Never modify the original definition of your
vehicle, particularly in the area directly
around the airbags.
After an accident or if the vehicle has been
stolen, have the airbag systems checked.
All work on the airbag systems must be
carried out by a PEUGEOT dealer or a
qualified workshop.
Even if all of the precautions mentioned
are obser ved, a risk of injury or of minor
burns to the head, chest or arms when an
airbag is deployed cannot be ruled out. The
bag inflates almost instantly (within a few
milliseconds) then deflates within the same
time discharging the hot gas via openings
provided for this purpose.Front airbags
Do not drive holding the steering wheel by its
spokes or resting your hands on the centre
part of the wheel.
Passengers must not place their feet on the
dashboard.
Do not smoke as deployment of the airbags
can cause burns or the risk of injury from a
cigarette or pipe.
Never remove or pierce the steering wheel or
hit it violently.
Do not fit or attach anything to the steering
wheel or dashboard, this could cause injuries
in case of airbag deployment.
Lateral airbags
Use only approved covers on the seats,
compatible with the deployment of the lateral
airbags. For information on the range of seat
covers suitable for your vehicle, contact a
PEUGEOT


dealer.
Do not attach anything to or hang anything
from the seat backrests (clothes, etc.) as
this could cause injuries to the thorax or arm
when the lateral airbag is deployed.
Do not sit with the upper part of the body any
nearer to the door than necessary. Curtain airbags
Do not attach anything or hang anything to
the roof, as this could cause head injuries
when the curtain airbag is deployed.
If fitted to your vehicle, do not remove the
grab handles installed on the roof, they play a
part in securing the curtain airbags.
Safety

63
(e)When a rear ward facing child seat is
installed on the front passenger seat , it
is essential to deactivate the passenger’s
airbag. Otherwise, the child would risk
being seriously injured or killed if the
airbag were deployed . When a for ward
facing child seat is installed on the front
passenger seat , the passenger's airbag
must remain activated.
U: Seat suitable for the installation of a
child seat secured using a seat belt and
universally approved, rearward facing
and/or forward facing.
X: Seat not suitable for the installation of a
child seat of the weight group indicated.
Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.ISOFIX mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation.
The seats shown below are fitted with ISOFIX
compliant mountings:
There are three rings for each seat:
-

t
wo rings A , located between the vehicle's
seat backrest and cushion, indicated by a
marking, -

a r
ing B, for fixing the upper strap, called
TOP TETHER and located in the boot.
Its position is indicated by a marking.
The TOP TETHER is used to secure the upper
strap of child seats that have them. This device
limits for ward tipping of the child seat, in the
event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured to the two rings A .
Some also have an upper strap which is
attached to ring B .
5
Safety

64
To secure the child seat to the TOP TETHER:
- p ass the child seat strap over the centre of
the vehicle's seat backrest,
-

l
ift the TOP TETHER cover,
-

s
ecure the upper strap fixing to the ring B ,
-

t
ighten the upper strap.The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Strictly obser ve the fitting instructions
provided with the child seat.
For information on the possibilities for installing
ISOFIX child seats in your vehicle, refer to the
summary table.
Recommended ISOFIX child
seats
Also consult the installation guide from the
child seat’s manufacturer to find out how
to install and remove the seat. "
RÖMER Baby- Safe Plus and its ISOFIX
base"
(size category: E )
Group 0+: from bir th to 13 kg
Installed "rearward facing" using an ISOFIX base which is attached to rings A .
The base has a height adjustable support leg that rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used and attached to the vehicle seat using the three-point seat belt. "
RÖMER Duo Plus ISOFIX "
(size category: B1 )
Group 1: 9-18 kg
Installed only in the "forward facing" position. Attached to rings A and upper ring B ,
referred to as TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining, lying down.
We recommend the lying down position.
This child seat can also be used on seats not equipped with ISOFIX mountings. In
this case, it must be secured to the vehicle's seat by the three-point seat belt. Adjust the
position of the vehicle's front seat so that the child's feet are not touching the backrest.
Safety

65
Summary table of ISOFIX child seat locations
In line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child
seat next to the ISOFIX logo.
Weight of the child/indicative age
Under 10
kg
(group


0)
Up to about 6 months old Under 10
kg (group 0)
Under 13
kg (group 0+)
Up to about 1 year old 9-18
kg (group 1)
From about 1 to 3 years old
Type of ISOFIX child seat Carr y- cot*"Rearward facing " "Rearward facing " "Forward facing "
ISOFIX size categor y F G C D E C D A B B1
ISOFIX universal and semi-
universal child seats which can be installed on the rear outer seats X
X X RÖMER
BabySafe Plus
ISOFIX X X
IUF
*

C
arry-cots and car beds cannot be installed
on the front passenger seat.
I UF:
seat suitable for the installation of an
Isofix U niversal seat, " For ward facing",
secured using the top tether.
X: seat which is not suitable for the
installation of an ISOFIX seat of the size
category indicated. Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.
5
Safety

66
Advice on child seats
The incorrect installation of a child seat in a
vehicle compromises the child's protection in
the event of an accident.
Ensure that there is no seat belt or seat belt
buckle under the child seat, as this could
destabilise it.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack
relative to the child's body to a minimum,
even for short journeys.
When installing a child seat using the seat
belt, ensure that the seat belt is tightened
correctly on the child seat and that it secures
the child seat firmly on the seat of your
vehicle. If your passenger seat is adjustable,
move it for wards if necessary.
At rear seating places, always leave sufficient
space between the front seat and:
-

a "
rear ward facing" child seat,
-

t
he feet of a child seated in a "for ward
facing" child seat.
To do this, move the front seat for wards
and, if necessary, move its backrest into the
upright position. For optimal installation of the "forward facing"
child seat, verify that its backrest is as close
as possible to the backrest of the vehicle
seat, or if possible in contact with it.
You must remove the head restraint before
installing a child seat with backrest on
a passenger seat. Ensure that the head
restraint is stored or attached securely to
prevent it from being thrown around the
vehicle in the event of sharp braking. Refit the
head restraint when the child seat is removed.
Installing a booster seat
The chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
PEUGEOT recommends using a booster seat
with a backrest, equipped with a belt guide at
shoulder level.
As a safety precaution, do not leave:
-

a c
hild or children alone and unattended in
a vehicle,
-

a c
hild or an animal in a car which is
exposed to the sun, with the windows
closed,
-

t
he keys within reach of children inside the
vehicle.
To prevent accidental opening of the doors
and rear windows, use the child lock.
Take care not to open the rear windows by
more than one third.
To protect young children from the rays of the
sun, fit side blinds on the rear windows.
Children in the front
The legislation on carrying a child on the front
passenger seat is specific to each country.
Refer to the legislation in force in your
c o u nt r y.
Deactivate the passenger airbag when a
"rear ward facing" child seat is installed on the
front passenger seat. Otherwise, the child
may be seriously injured or killed were the
airbag to be deployed.
Safety