2018 MITSUBISHI OUTLANDER Owner's Manual (in English)

Trailer towing6-16 Driving safety
6
1. Apply the brakes a
nd keep them applied.
2. Have someone plac
e chocks or blocks
under both the vehicle and trailer wheels.3. When the chocks or blocks are in place,release your brakes slowly until thechocks or blocks absorb the load.4. Apply the parking brake firmly.5. Set the selector lever to the

7
Comfort controlsVents ................................................................................................7-2Dual-zone automatic climate control air conditioner ......................7-5Important air conditioning operating tips ..
...........
...........
.........
.....7-13
Air purifier .....................................................................................7-14General information about your radio .....
...........
...........
...........
.....7-14
BK0249100US.book 1 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Vents7-2 Comfort controls
7
N00729901288
N00730201340
Move the knob (A) to make adjustments.To close the vent, fully move the knob (A) tothe outer side.
Move the knob (A) to make adjustments.To close the vent, fully move the knob (A) tothe left side.
Ve n t s 1- Driver’s vents2- Passenger’s vents
Air flow and direction adjust-ments Driver’s vents 1- Close2- Open
Passenger’s vents 1- Close2- Open
NOTE
On rare occasions, air from the vents of anair-conditioned vehicle
may be foggy. This is
due to only moist air
cooling suddenly and it
does not indica
te a problem.
Do not let drinks or ot
her liquids get into the
vents as they could pr
event the air condition-
ing from operating normally.
BK0249100US.book 2 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Vents
Comfort controls 7-3
7
N00736401692
To change the position and amount of airflowing from the vents, press the modeswitch or defogger switch. Refer to “Modeswitch” on page 7-8, “Defogger switch” onpage 7-8.These symbols are used in the next severalillustrations to demonstr
ate the quantity of air
coming from the vents. : Small amount of air from the vents : Medium amount of air from the vents : Large amount of air from the ventsAir flows only to the upper part of the passen-ger compartment.
Air flows to the upper part of the passengercompartment, and flows to the leg area.
Air flows mainly to the leg area.
Changing the mode selection Face position
Foot/Face position
NOTE
The foot/face air flow ratio can be adjustedwith the mode selection in the “ ” posi-tion.For further information, we recommend youto consult an authorized Mitsubishi Motorsdealer or a repair fa
cility of your choice.
On vehicles equippe
d with the Smartphone
Link Display Audio, sc
reen operations can
be used to make the ad
justment. Refer to the
separate owner’s
manual for details.
Foot position
BK0249100US.book 3 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Vents7-4 Comfort controls
7
Air flows to the leg area, the windshield andthe door windows.
Air flows mainly to the windshield and thedoor windows.
Foot/Defroster position
NOTE
The foot/defroster air flow ratio can beadjusted with the mode selection in the“ ” position.For further information, we recommend youto consult an authorized Mitsubishi Motorsdealer or a repair fa
cility of your choice.
On vehicles equippe
d with the Smartphone
Link Display Audio, sc
reen operations can
be used to make the adjustment. Refer to theseparate owner’s
manual for details.
Defroster position
BK0249100US.book 4 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Dual-zone automatic climat
e control air conditionerComfort controls 7-5
7
N00731501412
The air conditioner can only be us
ed while the engine is running.
N00711801695
Dual-zone automatic climat
e control air conditioner
CAUTIONThe engine speed may increase when
the air conditioner is operating.
With an increased engine speed, an A/T or
CVT vehicle will creep to a gr
eater degree than with a lo
wer engine speed. Fully depr
ess the brake pedal to pre-
vent the vehicl
e from creeping.
Control panel 1- Driver’s side temperature control
switch
2- Air conditioning switch
3- Blower speed
selection switch
4- MODE switch5- Passenger’s side temperature control
switch
6- Air selection switch7- Defogger switch8- AUTO switch
BK0249100US.book 5 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Dual-zone automatic climate
control air conditioner
7-6 Comfort controls
7
N00736901206
Press of the blower speed selectionswitch to increase the blower speed.Press of the blower speed selectionswitch to decrease the blower speed.The selected blower sp
eed will be shown in
the display (A).
9- Electric rear window
defogger switch
 P.5-225
10- OFF switch11- Driver’s side temperature display
 P.7-7
12- DUAL indicator13- Mode selection display14- Passenger’s side temperature display
 P.7-7
15- Air conditioning indicator16- Blower speed display
NOTE
There is an interior air temperature sensor(A) in the illustrated position.Never place anything ove
r the sensor, since
doing so will prevent it from functioningproperly.
NOTE
Since the air conditi
oning operation is con-
trolled while the ECO mode is operating,you may feel that effectiveness of the airconditioner is insufficient. ECO mode switch P.5-218
Even during ECO mode operation, you canselect normal operati
on of the air condi-
tioner.On vehicles equipped with the SmartphoneLink Display Audio, sc
reen operations can
be used to change the setting. Refer to theseparate owner’s manual for details.In extreme cold, the air conditioning controlpanel screen may ope
rate sluggishly. This
does not indicate a problem.It will disappear when the vehicle interiortemperature rises to a normal temperature.
Blower speed selection switch 1- Increase2- Decrease
BK0249100US.book 6 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Dual-zone automatic climat
e control air conditionerComfort controls 7-7
7
N00737001448
Press or of the temperature controlswitch to the desired temperature.The selected temperature will be shown in thedisplay (A).
The above indicates the
factory settings. You
can personalize the air
selection switch and
air conditioning switch to match your per-sonal preferences.Contact your Mitsubishi
Motors dealer or a
repair facility of your
choice for assistance.
Refer to “Personalizi
ng the air conditioning
switch (Changing the function setting)” onpage7-10.Refer to “Personalizing the air selection(Changing the function setting)” on page7-9.The driver’s side and the passenger’s sidetemperature can be controlled independently.At this time, the “
DUAL” indicato
r will be
shown in the display (A).
Temperature control switch
NOTE
The temperature value
of air conditioner is
switched in conjunction
with outside temper-
ature display unit of the multi informationdisplay.On vehicles equipped with multi informationdisplay - Type 1, refer to “Changing the tem-perature unit” on page 5-170.On vehicles equipped with multi informationdisplay - Type 2, refer to “Changing the tem-perature unit” on page 5-180.
When the engine coolan
t temperature is low,
the air temperature from the heater will becool/cold until the engi
ne warms up, even if
you have selected warm
air with the switch.
To prevent the windshield and windows fromfogging up, the vent mode will be changed to“ ” and the blower speed will be reducedwhile the system is operating in the AUTOmode.When you feel that it is hotter or colder thanthe set temperature, you may adjust it to yourpreference.For further information, we recommend youto consult an authorized Mitsubishi Motorsdealer or a repair fa
cility of your choice.
When the temperature is set to the highest orthe lowest setting, the air selection and theair conditioner will be automatically changedas follows.Also, if the air select
ion is operated manually
after an automatic ch
angeover, manual oper-
ation will be selected.• Quick Heating (When th
e temperature is set
to the highest setting)Outside air will be introduced and the airconditioner will stop.• Quick Cooling (When the temperature is setto the lowest setting)Inside air will be reci
rculated and the air
conditioner wi
ll operate.
NOTE

Synchronized mode and dual mode
BK0249100US.book 7 ページ ２０１７年５月１０日　水曜日　午前８時４９分