2018 MERCEDES-BENZ G-CLASS SUV Owners Manual

#
Slide there lease cat ch1 tothe left. #
Swivel theflap 2 tothe left until it comes to
re st on there ar side of there ar ben chseat. #
Foldthe seat backrest backwards and fold
th ere ar armrest down. #
Foldthe co ver3 forw ards until it comes to
re st on there ar armrest. #
Pull the cent rehead restra int of there ar
ben chseat fully upwards. Fo
lding there ar ben chseat forw ards &
WARNING Risk of inju ryifth ere ar
ben chseat/rear seat and seat backrest
are not engaged
If th ere ar ben chseat/rear seat and seat
backrest are not engaged they could fold for‐
wa rds, e.g. when braking suddenly or in the
ev ent of an accident. R
Ifth is is the case, theve hicle occupant
wo uld be forc ed into the seat belt bythe
re ar ben chseat/rear seat or bythe seat
backrest. The seat belt cann otprotect as
intended and could result in additional
injur y.
R Objects or loads in the boot/load com‐
partment cann otbe restra ined bythe
seat backrest. #
Make sure that the seat backrest and
th ere ar ben chseat/rear seat are
engaged before everytrip. *
NO
TEDama getothe seat backrests The seat backrests may be damaged when
th
ere ar ben chseat is folded forw ards. #
Foldthere ar ben chseat's cushion
upwards before there ar seat backrest
is folded forw ards. The left and
right seat backrests can be folded
fo rw ards separatel y.102
Seats and stowing

#
Fully inse rtthe seat backrest head restra ints
(/ page 90). #
Foldthe seat cushion upwards using the loop
1. #
Pull there lease handle 2upwards until the
seat backrest is comple tely unlo cked. #
Foldthe seat backrest forw ards. Fo
lding back there ar ben chseat *
NO
TEDama getothe seat belt The seat belt could become trapped and
thus
damaged when folding back the seat back‐
re st. #
Make sure that the seat belt is not trap‐
ped when folding back the seat back‐
re st. #
Swi velth e seat backrest 1back until it
engages. #
Swivel the seat cushion 2bac k. Seats and
stowing 103

Re
ar seat backrests Ad
justing the angle of the rear seat backr‐
ests &
WARNING Risk of inju ryifth ere ar
ben chseat/rear seat and seat backrest
are not engaged
If th ere ar ben chseat/rear seat and seat
backrest are not engaged they could fold for‐
wa rds, e.g. when braking suddenly or in the
ev ent of an accident.
R Ifth is is the case, theve hicle occupant
wo uld be forc ed into the seat belt bythe
re ar ben chseat/rear seat or bythe seat
backrest. The seat belt cann otprotect as
intended and could result in additional
injur y.
R Objects or loads in the boot/load com‐
partment cann otbe restra ined bythe
seat backrest. #
Make sure that the seat backrest and
th ere ar ben chseat/rear seat are
engaged before everytrip. Yo
u can adjust the angle of there ar seat backr‐
ests. There are se veral possible de tent positions. #
Pull the left or right release le ver1 inthe
direction of the ar row and hold it in position. #
Movethe seat backrest 2tothe desired
angle. #
Let go of there lease le ver1. #
Ensure that the seat backrest is engaged. Load compartment co
ver Extending/r
etra cting the load compa rtment
co ver &
WARNING Risk of inju ryor death due to
objects being poorly secured
On its own,the load compartment co ver can‐
not secure or restra in heavy objects, items of
luggage and heavy loads.
Yo u could be hit byan unsecured load during
sudden changes in direction, braking or in
th eev ent of an accident. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Secure objects, luggage or loads
against slipping or tipping over,e.g. by
using lashing material, even if you are
using the load compartment co ver. 104
Seats and stowing

*
NO
TEDama getothe load compartment
co ver when loading theve hicle The load compartment co
ver may be dam‐
aged when loading theve hicle. #
Do not place any objects abo vethe
lo we r edge of the side windo wsor on
th e load compartment co ver. The load compartment co
ver is attached behind
th e seat backrest of there ar ben chseat. #
Toextend: pull load compartment co ver1
back bygrab handle 2until it engages. #
Toretract: pushthere ar edge of the load
compartment co ver1 down wards.
The load compartment co ver1 auto mati‐
cally mo vesfo rw ards.
Fo r easier loading, the load compartment co ver
can be folded upwards.
Fi tting and removing the load co mpartment
co ver
Re quirements:
R The load compartment co ver is retracted. #
Toremo ve: press in the end cap of the load
compartment co ver1 ontheright- or left-
hand side. #
Push the load compartment co ver1 into
th ere cess 2onthe opposite side. #
Take the load compartment co ver1 out by
pulling it upwards. #
Toinstall: placethe load compartment co ver
1 into there cess 2ontheright- or left-
hand side. #
Press in the end cap of the load compart‐
ment co ver1 onthe opposite side and
insert the load compartment co ver1 into
th eot her recess 2. #
Slide the end cap outwards. At
taching/rem oving the pa rtition net &
WARNING Risk of inju ryor death due to
objects being poorly secured
On its own,the partition net cann otsecure
or restra in heavy objects, items of luggage
and heavy loads. Seats and
stowing 105

Yo
u could be hit byan unsecured load during
sudden changes in direction, braking or in
th eev ent of an accident. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Secure objects, luggage or loads
against slipping or tipping over,e.g. by
using lashing material, even when you
are using the partition net. Fo
r saf etyre asons, alw ays use a partition net
when transporting a load.
Damaged partition nets can no longer fulfil their
pr otective functions and must be replaced. Visit
a qu alified specialist workshop. Pa
rtition net without load compartment enlar ge‐
ment Pa
rtition net with load compartment enlar gement #
Extend and unfold the partition net.
The joints on theto p and bottom guide rods
will engage audibly. #
Toattach: attachthe guide rod1 onthe
ro of lining tothe holders 2. #
Enga gethe hooks 3inthe tie-down eyes
4 onthe left and right. 106
Seats and stowing

#
Pull at the loose ends of the lashing stra ps
until the partition net is tight. #
After driving a short dis tance, check thete n‐
sion of the partition net and re-tension it if
necessa ry. #
Toremo ve: pull the belt clamp 5upwards
until the tie-down stra ps are loose. #
Remo vethe hooks 3from the tie-down
ey es 4 onthe left and right. #
Remo vethe guide rod1 from the holders
2. #
Tosto w:press there d buttons on thetop
and bottom guide rods. #
Fold up and retract the partition net. Overview of
the tie-down eyes Obser
vethe no tes on loading theve hicle
(/ page 98). 1
Tie-down eyes for securing loads Overview of bag hooks
&
WARNING Risk of inju rywhen using bag
hooks with heavy objects
The bag hooks cannot restra in heavy objects
or items of luggage. Seats and
stowing 107

Objects or items of luggage could be
thrown
around and thereby hit vehicle occupants
when braking or abruptly changing direc‐
tions. #
Onlyhang light objects on the bag
hooks. #
Never hang hard, sharp-edged or fragile
objects on the bag hooks. Obser
vethe no tes on loading theve hicle
(/ page 98).
The bag hooks can bear a maximum load of
3 kg . Do not use them tosecure a load. 1
Bag hook At
taching a roof rack &
WARNING Risk of inju ryifth e maximum
ro of load is exceeded
When you load thero of, the cent reof gr avity
of theve hicle rises and the usual driving ch
aracteristics as well as thesteering and
braking characteristics change. During cor‐
nering, theve hicle tilts more strongly and
may react more sluggishly tosteering mo ve‐
ments.
If yo uexc eed the maximum roof load, the
driving characteristics, as well as thesteer‐
ing and braking characteristics, will be
great lyimpaired. #
Alw ays comply with the maximum roof
load and adjust your driving style. &
WARNING Risk of inju ryif unsuitable
climbing aids are used
If yo u use vehicle body openings or add-on
parts as steps, thefo llowing can occur:
R You may slip and/or fall.
R You may damage theve hicle and then
fa ll. #
Alw ays use ‑non-slip, stable climbing
aids, e.g. a suitable ladder. 108
Seats and stowing

*
NO
TEStepping on the wheel ar chflares
and bumpers may damage them If
yo u use the wheel ar chflares and bumpers
as a step, they may be dama ged or de tach
from theve hicle. #
Only use the two mar kedsteps on the
re ar bumper as a climbing aid. *
NO
TEVehicle damage due tonon-
appr ovedro of racks The
vehicle could be damaged byroof racks
which ha venot been tested and appr ovedby
Mercedes-Benz. #
Only use roof rack s appr ovedfor
Mercedes-Benz. #
Depending on theve hicle equipment,
ensure that when thero of rack isfitted,
th e sliding sunroof can be fully raised. #
Position the load on thero of rack in
such a wayth at theve hicle will not sus‐
ta in damage even when it is in motion. *
NO
TEMaximum pe rmitted roof load The
weight of thero of luggage, including the
ro of rack , must not exceed the maximum
permitted roof load.
The maximum roof load is 150kg ifth ere are
at least thre e pairs of support feet.
This applies if the load is distributed evenly
across the entire roof sur face. The maximum
load for each pair of roof rack support feet is
50 kg. When
theve hicle is at a standstill and when at
least thre e pairs of support feet are used, the
maximum permitted roof load of 150kg may be
exc eeded bya maximum of 150kg , e.g. when a
ro of tent is used. Alw ays comply with thero of
ra ck manufacturer's ins tallation instructions. *
NO
TEDama getothe co vers The co
vers may be dama ged and scratched
when being opened. #
Use the disassembly tool pr ovided in
th eve hicle tool bag. #
Do not use me tallic or hard objects. Seats and
stowing 109