2018 Lexus LC500 steering

41
1
-$@-$I@0.@0.&@ &&

1-1. For safe use
For safety and security
WARNING
●Improperly seated and/or restrained infants and children can be killed or seriously injured by a deploying airbag.
An infant or child who is too small to use a seat belt should be properly secured using a child restraint system.
Lexus strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly
restrained. The rear seats are safer for infants and children than the front pas-senger seat. ( P.48)
●Do not sit on the edge of the seat or
lean against the dashboard.
●Do not allow a child to stand in front of
the SRS front passenger airbag unit or sit on the knees of a front passenger.
●Do not allow the front seat occupants to hold items on their knees.
●Do not lean against the door, the roof side rail or the front, side and rear pil-
lars.
●Do not allow anyone to kneel on the
passenger seat toward the door or put their head or hands outside the vehi-cle.
●Do not attach anything to or lean any-thing against areas such as the dash-
board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles
when the SRS driver, front passenger and knee airbags deploy.

42
-$@-$I@0.@0.&@ &&

1-1. For safe use
WARNING
●Do not attach anything to areas such as a door, windshield, side window, front or rear pillar and roof side rail.
●Do not hang coat hangers or other hard objects on the coat hooks. All of
these items could become projectiles and may cause death or serious injury, should the SRS curt ain shield airbags
deploy.
●If a vinyl cover is put on the area where the SRS knee airbag will deploy, be sure to remove it.
●Do not use seat accessories which
cover the parts where the SRS side air- bags inflate as they may interfere with inflation of the SRS airbags. Such
accessories may prevent the side air- bags from activating correctly, disable the system or cause the side airbags to
inflate accidentally, resulting in death or serious injury.
●Do not strike or apply significant levels of force to the area of the SRS airbag
components or the doors. Doing so can cause the SRS airbags to malfunction.
●Do not touch any of the component
parts immediately after the SRS air- bags have deployed (inflated) as they may be hot.
●If breathing becomes difficult after the
SRS airbags have deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so.
Wash off any residue as soon as possi- ble to prevent skin irritation.
●If the areas where the SRS airbags are stored, such as the steering wheel pad
and front and rear pillar garnishes are damaged or cracked, have them replaced by any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer.
■Modification and disposal of SRS air-bag system components
Do not dispose of your vehicle or per- form any of the following modifications
without consulting any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer. The SRS airbags
may malfunction or deploy (inflate) acci- dentally, causing death or serious injury.
●Installation, removal, disassembly and repair of the SRS airbags
●Repairs, modifications, removal or
replacement of the steering wheel, instrument panel, dashboard, seats or seat upholstery, front, side and rear pil-
lars, roof side rails, door panels, door trims or door speakers
●Modifications to the door panel (such
as making a hole in it)
●Repairs or modifications of the front fender, front bumper, or side of the occupant compartment
●Installation of a grille guard (bull bars,
kangaroo bar, etc.), snow plows, winches or roof luggage carrier
●Modifications to the vehicle’s suspen-sion system
●Installation of electronic devices such
as mobile two-way radios (RF-trans- mitter) and CD players

83
2
-$@-$I@0.@0.&@ &&

2-1. Instrument cluster
Vehicle status information and indicators
Warning lights inform the driver of mal-
functions in the indicated vehicle sys-
tems.
*1: These lights turn on when the engine
switch is turned to
IGNITION ON mode to
indicate that a system check is being
performed. They will turn off after the
engine is started, or
after a few seconds. There may be a
malfunction in a syst em if a light does
not come on, or turn off. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
*2: This light illuminates on the multi-infor-
mation display.
*3: The light flashes to indicate a malfunc-
tion.
*4: This light illuminates on the center
Warning lights
(red)
Brake system warning light*1
( P.368)
Charging system warning
light*2 ( P.368)
Low engine oil pressure
warning light*2 ( P.368)
Malfunction indicator lamp*1
( P.369)
SRS warning light*1
( P.369)
ABS warning light*1
( P.369)
(red)
Electric power steering sys-
tem warning light*1 ( P.370)
(yellow)
Electric power steering sys-
tem warning light*1 ( P.370)
PCS warning light*1, 3
( P.370)
(orange)
LKA indicator*2 (P.371)
Slip indicator*1 ( P.371)
Brake Override System
warning light*2
( P.372)/Drive-Start Con-
trol warning light*2 ( P.372)
Brake hold operated indica-
tor*1, 3 ( P.372)
Parking brake indicator*3
(P.372)
Brake pad wear warning
light*2 ( P.373)
(yellow)
Brake system warning light*1
(P.373)
Low fuel level warning light
( P.373)
Driver’s and front passen-
ger’s seat belt reminder light
( P.373)
Rear passengers’ seat belt
reminder lights*4 ( P.374)
Master warning light*1
( P.374)
Tire pressure warning light*1, 3
( P.374)
High coolant temperature
warning light*2 ( P.375)

3
111
-$@-$I@0.@0.&@ &&

3
Before driving
Before driving
3-1. Key information
Keys .................................................. 112
3-2. Opening, closing and locking the
doors and trunk
Doors ............................................... 115
Trunk ................................................ 119
Smart entry & start system ..... 122
3-3. Adjusting the seats
Front seats..................................... 138
Driving position memory ........ 140
Head restraints............................ 143
3-4. Adjusting the steering wheel and
mirrors
Steering wheel ............................ 145
Inside rear view mirror............. 146
Outside rear view mirrors ...... 147
3-5. Opening, closing the windows
Power windows .......................... 150

140
-$@-$I@0.@0.&@ &&

3-3. Adjusting the seats
1Turn the engine switch switch> to IGNITION ON mode
.
2 Check that the shift position is in P.
3 Adjust the driver’s seat, steering
wheel, outside rear view mirrors
and head-up display to the desired
positions.
4 While pressing the “SET” button, or
within 3 seconds after the “SET”
button is pressed, press button “1”,
“2” or “3” until the buzzer sounds.
If the selected button has already been preset, the previously recorded position
WARNING
■Lever-operated “Front, Fold & Return” seat
●Before operating the lever-operated “Front, Fold & Return” seat, ensure that any surrounding passengers or objects
will not contact the seat.
●Make sure the seatback is locked securely before driving.
●Never operate the lever-operated “Front, Fold & Return” seat while the
vehicle is moving.
■Jam protection function
Do not use a hand, foot, or any other part
of your body to intentionally activate the jam protection function.
Driving position memory
This feature automatically adjusts
the positions of the driver’s seat,
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to suit your preferences.
Up to 3 different driving positions
can be recorded.
Each electronic key can be regis-
tered to recall your preferred driv-
ing position.
Recording a driving position into
memory

141
3
-$@-$I@0.@0.&@ &&

3-3. Adjusting the seats
Before driving
will be overwritten.
■Seat positions that can be memorized
( P.138)
The adjusted positions other than the posi-
tion adjusted by lumbar support switch can be recorded.
■In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is operated in
the same direction, the recorded position may be slightly different when it is recalled.
1 Turn the engine switch switch> to IGNITION ON mode
.
2 Check that the shift position is in P.
3 Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■To stop the position recall operation
part-way through
Perform any of the following:
●Press the “SET” button.
●Press button “1”, “2” or “3”.
●Operate any of the seat adjustment
switches (only cancels seat position recall).
●Operate the tilt and telescopic steering control switch (only cancels steering
wheel position recall).
■Operating the driving position memory after turning the engine switch off
Recorded seat positions can be activated up to 180 seconds after the driver’s door is
opened and another 60 seconds after it is closed again.
■Registering procedure
Record your driving position to button
“1”, “2” or “3” before performing the
following:
WARNING
■Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passen-
ger or squeeze your body against the steering wheel.
Recalling a driving position
Registering/cancel ing/recalling
a driving position to an elec-
tronic key (memor y recall func-
tion)

142
-$@-$I@0.@0.&@ &&

3-3. Adjusting the seats
Carry only the key you want to register,
and then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded
properly.
1 Turn the engine switch switch> to IGNITION ON mode
.
2 Check that the shift position is in P.
3 Recall the driving position that you
want to record.
4 While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the buzzer sounds continuously for approxi-mately 3 seconds.
■Cancelation procedure
1 Carry only the key you want to can-
cel and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled prop-erly.
2 Turn the engine switch switch> to IGNITION ON mode
.
3 While pressing the “SET” button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for approxi-
mately 3 seconds.
■Recall procedure
1 Make sure that the doors are
locked before recalling the driving
position. Carry the electronic key
that has been registered to the driv-
ing position, and then unlock and
open the driver’s door using the
smart entry & start system or wire-
less remote control.
The driving position will move to the recorded position (not including the steer-
ing wheel and head-up display).
If the driving position is in a position that
has already been recorded, the seat and outside rear view mirrors will not move.
2 Turn the engine switch switch> to ACCESSORY mode or
IGNITION ON mode mode>.
The steering wheel and head-up display will move to the recorded position.
■Recalling the driving position using the
memory recall function
●Different driving positions can be regis-
tered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being
carried.
●If the passenger’s door is unlocked with
the smart entry & start system, the driving position cannot be recalled. In this case, press the driving position button which
has been set.
■Customization
The unlock door settings of the memory
recall function can be changed. (Customizable features: P.423)

145
3
-$@-$I@0.@0.&@ &&

3-4. Adjusting the steering wheel and mirrors
Before driving
3-4.Adjusting the stee ring wheel and mirro rs
Operating the switch moves the steer-
ing wheel in the following directions:
1 Up
2 Down
3 Toward the driver
4 Away from the driver
■The steering wheel can be adjusted when
The engine switch

is in ACCESSORY or IGNITION ON mode .
■Automatic adjustment of the steering
position
A desired steering position can be entered
to memory and recalled automatically by the driving position memory system. ( P.140)
■Enabling easier driver entry and exit
(auto tilt away)
When the engine switch is
turned off, the steering wheel returns to its stowed position by moving up and away.
Turning the engine swit ch to
ACCESSORY or IGNITION ON mode
will return the steering wheel
to the original position.
■Customization
The auto tilt away function can be changed.
(Customizable features: P.423)
Press on or close to the mark.
Steering wheel
Adjustment procedure
WARNING
■Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mis- handle the vehicle and cause an acci-dent, resulting in death or serious injury.
Sounding the horn