2018 Lexus LC500 display

215
7
-$@-$I@/BWJ@0.&@ &&

7-3. What to do if...
Phone
system to on. (P.206)
■Notification of SMS/MMS/E-mail
reception on this system is set to
off.
Set notification of SMS/MMS/E-mail
reception on this system to on.
( P.205)
■Automatic message transfer func-
tion is not enabled on the cellular
phone.
Enable automatic transfer function on
the cellular phone.
■Connection confirmation display
on this system is set to on.
To turn off the display, set connection
confirmation display on this system to
off. ( P.50)
*: The engine switch is in
ACCESSORY or IGNITION ON
mode .
■The cellular phone is not close
enough to this system.
Bring the cellular phone closer to this
system.
■Radio interference has occurred.
Turn off Wi-Fi® devices or other
devices that may emit radio waves.
■The cellular phone is the most likely
cause of the symptom.
Turn the cellular phone off, remove and
reinstall the battery pack, and then
restart the cellular phone.
Enable the cellular phone’s Bluetooth®
connection.
Disable the Wi-Fi® connection of the
cellular phone.
Stop the cellular phone’s security soft-
ware and close all applications.
Before using an application installed on
the cellular phone, carefully check its
source and how its operation might
affect this system.
●For details, refer to the owner’s manual that came with the cellular phone.
New message notifications are not
displayed.
In other situations
The Bluetooth® connection status is
displayed at the top of the screen
each time the system is activated.*
Even though all conceivable mea-
sures have been taken, the symptom
status does not change.

218
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
8-1.C onnected services
Online search/Street View/Weather/Fuel price/Parking
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Name/operation
System
Enter a keyword.
Lexus portal site*/Contents provider
The keyword is sent to the search engine, the results are received, and sent to the system.
Connected services overview
The following services are available by connecting the system to Lexus portal
site via the internet using a cellular phone or Wi-Fi® network.
 Online search: New establishments, such as restaurants, bars etc., that are
not registered in the system, can be set as a destination.
 Importing favourites and routes: Establishments that were searched using a
personal computer can be set as a destination and can be registered as
favourites.
 Street View: The Street View of the desired location can be viewed.
 Weather: Weather information for a desired location can be displayed.
 Fuel price: Fuel price information for a desired location can be displayed.
 Parking: Parking availability and price for a desired location can be displayed.
 Remote customization: Remote customization allows users to set their pre-
ferred vehicle settings from Lexus Portal site.
Names and Operations of each part
A
B

219
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
System
The results are displayed.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Importing favourites and routes: Downloading via the internet
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Name/operation
Your personal computer and Lexus portal site*
Access Lexus portal site and search POIs and routes.
Lexus portal site*
The POIs and routes are saved on Lexus portal site.
System
Via the internet, the POIs are downloaded to the system.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Importing favourites and routes : Downloading from a USB memory
Name/operation
Your personal computer and Lexus portal site*
Access Lexus portal site and search POIs and routes.
C
A
B
C
A

223
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Online” on the sub menu.
4 Select “Lexus Online”.
5 Select “Lexus web account”.
6 Select “Load POIs and routes from
server”.
7 Check that a confirmation screen is
displayed when the operation is
complete.
 To edit favourites and routes:
 P.103
●Setting “Auto download” to “on” will auto- matically download external points.
( P.229)
●Even if there is same name of favourite, it
will be displayed on the list without over- write.
1 Slide the armrest as far back while
pressing the button.
2 Lift the armrest while pulling the
knob.
3 Open the cover and connect a
device.
 Turn on the power of the USB mem-
ory if it is not turned on.
Procedure for downloading
favourites and routes from a
USB memory

224
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
4Insert USB device.
5 Select “Yes” on the popup which
tells “Your USB device contains
POIs and/or routes. Would you like
to add these to the navigation
favourites?”
6 Waiting the process.
7 Complete screen will be displayed.
 All routes and favourites are copied.
8 Waiting until finish copy.
 To cancel this function, select “Can-
cel”.
9 Check that a confirmation screen is
displayed when the operation is
complete.
●Favourites that are located outside of the map’s data range cannot be registered.
●A maximum of 200 favourites can be registered.
●In some cases, favourites and routes may not be able to be imported. If this occurs,
an error message with more details will be displayed.
Street View can be activated whenever
the Street View icon is visible.
For example:
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.69)
2 Select a point on the map.
3 Press the button on the Remote
touch.
4 Select “Street View”.
5 Check that the picture is displayed.
“<”, “>”: Select to change pictures. Up to 6 pictures per location can be displayed.
●The Street View function can also be
selected from the following screens: • Entire route map screen ( P.90) • Online POI details screen (except traffic
messages) ( P.75)
NOTICE
●Depending on the size and shape of
the device that is connected to the sys- tem, the console box may not close fully. In this case, do not forcibly close
the console box as this may damage the device or the terminal, etc.
Street View
The Street View of the desired loca-
tion can be viewed, provided the
system is connected to the internet.
( P.221)
Displaying the Street View

225
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
●This function is not available while driving.
1Display the start route guidance
screen. ( P.90)
2 Select weather icon.
3 Check that the “Weather” screen is
displayed.
“Location”: Select to change the location of
weather information. ( P.225)
“Forecast”: Select to display the weather
forecast for the next 5 days.
“Current”: Select to display the weather for
current time.
: Select to update the weather infor-
mation.
1 Display the start route guidance
screen. ( P.90)
2 Select weather icon.
3 Check that the “Weather” screen is
displayed.
4 Select “Location”.
5 Select the desired item to search
for a point.
“At destination”: Select to set a location by using a current destination.
“Current location”: Select to set a location by using the current position.
Weather
Weather information for a desired
location can be displayed, provided
the system is connected to the
internet. ( P.221)
Displaying the weather screen
Changing location

226
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
“Search location”: Select to search for another location.
“Set location”: Select to set a new favourite location. ( P.226)
■Registering favourites
1 Select “Set location”.
2 Enter desired location by perform-
ing search. Select the desired loca-
tion from the search results.
●Up to 20 locations can be registered.
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.69)
2 Select on the map.
3 Select “Parking”.
4 POI list with parking will be dis-
played. (if there is any information
on offline or online database.)
“By Dist”: Select to sort by distance.
“By name”: Select to sort alphabetically by
POI name.
“By Price”: Select to sort by price.*
*: This function needs an Internet connec-
tion and a login on the Lexus server.
: Select to display the list with map.
: Select to update fuel price informa-
tion.
Parking
Parking information for a desired
location can be displayed, provided
the system is connected to the
internet. ( P.221)
Displaying the Parking list
screen

227
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
5Check that the parking information
is displayed.
“Go”: Select to display the starting route guidance screen. ( P.90)
“Call”: Select to call the registered phone number. ( P.196)
“Street View”: Select to display the Street View. ( P.224)
1Display the parking screen.
( P.226)
2 Press the button on the Remote
touch.
3 Select search area.
“Nearby”: Select to sort by around current location.
“Destination”: Select to sort by around des-
tination.*
“On route”: Select to sort by around cur-
rent route.*
*: Only available if destination is set.
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.69)
2 Select on the map.
3 Select “Fuel”.
4 POI list with fuel prices will be dis-
played. (if there is any information
on offline or online database.)
“By Dist”: Select to sort by distance.
“By Brand”: Select to sort by brand.
“By Price”: Select to sort by price.*
*: This function needs an Internet connec-
tion and a login on the Lexus server.
: Select to display the list with map.
: Select to update fuel price informa-
tion.
Changing location
Fuel price
Fuel price information for a desired
location can be displayed, provided
the system is connected to the
internet. ( P.221)
Displaying the fuel price list
screen