2018 Lexus LC500 display

197
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
between hands-free and cellular
phone.
Select to talking/holding with the
other party*. ( P.198)
Select to hang up the phone.
*: This function may not be available
depending on the type of Bluetooth®
phone.
Side display
Select to mute your voice to the
other party.
Select to change handset modes
between hands-free and cellular
phone.
Select to hang up the phone.
Select to start talking/holding with
the other party*. ( P.198)
Select to switch to the main display.
*: This function may not be available
depending on the type of Bluetooth®
phone.
●When cellular phone call is changed to hands-free call, the hands-free screen will
be displayed and its functions can be operated on the screen.
●Changing between cellular phone call and hands-free call can be performed by
operating the cellular phone directly.
●Transferring methods and operations will
be different depending on the type of cel- lular phone you have.
●For the operation of the cellular phone, see the manual that comes with it.
●This screen can be di splayed on the main display or side display. ( P.205)
■By keypad
This operation cannot be performed
while driving.
1 Select “0-9” on the sub menu.
2 Enter the desired number.
■By selecting “Release tones”
“Release tones” appear when a contin-
uous tone signal(s) containing a (w) is
registered in the contact list.
1 Select “Release tones” on the sub
menu.
●A continuous tone signal is a character string that consists of numbers and the
characters p or w. (e.g. 056133w0123p#1 )
●When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have
elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be automatically sent
after a user operation is performed.
●Release tones can be used when auto-
mated operation of a phone based ser- vice such as an answering machine or bank phone service is desired. A phone
number with continuous tone signals can be registered in the contact list.
●Tone data after a “w” pause tone can be operated on speech command during a call.
G
H
A
B
C
D
E
Sending tones

198
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
1Select “Transmit volume” on the sub
menu.
2 Select the desired level for the
transmit volume.
3 Press the button on the
Remote Touch to display previous
screen.
●The sound quality of the voice heard from the other party’s speaker may be nega-
tively impacted.
●“Transmit volume” is dimmed when mute
is on.
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
The incoming screen can also be dis-
played on the side display.
1 Select “Answer” or press the
switch on the steering wheel to
start talking with the other party.
 To refuse to receive the call: Select
“Decline”.
 Each time “Swap calls” is selected,
the party who is on hold will be
switched.
●This function may not be available
depending on the type of cellular phone.
●This screen can be displayed on the main
display or side display.
 When there are no calls on hold
during a call: “Hold” is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: “Activate” is
displayed. When selected, the sys-
tem switches to the call that was on
hold.
 When there is another call on hold
during a call: “Swap calls” is dis-
played. When selected, the current
call is placed on hold, and the sys-
tem switches to the call that was on
hold.
●This function may not be available depending on the type of cellular phone.
●This screen can be di splayed on the main display or side display.
Transmit volume setting
Incoming call waiting
Switching calls whil e a call is in
progress

199
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the account name.
 Account names are the names of
the accounts that exist on the cur-
rently connected phone.
5 Check that the message inbox
screen is displayed.
“Phone”: Select to change to phone mode.
 The following functions can be used
on message function:
• Receiving a message ( P.199)
• Checking received messages
( P.200)
• Checking sent messages ( P.200)
• Replying to a message (Create new
message) ( P.201)
• Replying to a message (Quick reply)
( P.201)
• Calling the message sender ( P.202)
• “Messaging” screen ( P.211)
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is ready
to be operated on the screen.
Select to check the message.
Select to not open the message.
Select to call the message sender.
●To display the above screen, it needs to
Bluetooth® phone message
function
Received messages and sent mes-
sages can be forwarded from the
connected Bluetooth® phone,
enabling checking and replying
using the system.
Depending on the type of
Bluetooth® phone connected,
received messages may not be
transferred to the message inbox.
If the phone does not support the
message function, this function
cannot be used. Ev en when the sup-
ported phone is used, reply function
may not be used.
Displaying the message inbox
screen
Receiving a message
A
B
C

200
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
be set to “Full screen” on “Incoming SMS/MMS display” and “Incoming E-mail display”. ( P.205) Default setting is
“Drop-down”.
●Depending on the cellular phone used
for receiving messages, or its registration status with the system, some information may not be displayed.
●The pop up screen is separately available for incoming e-mail and SMS/MMS
messages under the following conditions:
E-mail:
• “E-mail notification pop-up” is set to on.
( P.205)
SMS/MMS:
• “SMS/MMS notification pop-up” is set to
on. ( P.205)
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select a desired account name that
is displayed on the left side of
screen.
5 Select the desired message from
the list.
6 Check that the message is dis-
played.
Select “Mark unread” or “Mark
read” to mark e-mail unread or
read on the message screen.
This function is available when
“Update message read status on
phone” is set to on. ( P.211)
When the text message type is
SMS, it is not displayed.
Select to reply to the message.
( P.201)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select .
When “Automatic message read-
out” is set to on, messages will be
automatically read out. ( P.211)
Select to make a call to the sender.
●Depending on the type of Bluetooth® phone being connected, it may be neces-sary to perform additional steps on the
phone.
●Messages are displayed in the appropri-
ate connected Bluetooth® phone’s regis- tered mail address folder. Select the desired folder name to be displayed.
●Turn the “PWR·VOL” knob, or use the volume control switch on the steering
wheel to adjust the message read out vol- ume.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
Checking received messages
A
Checking sent messages
B
C
D
E

201
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
4Select a desired account name that
is displayed on the left side of
screen.
5 Select the desired message from
the list.
6 Check that the message is dis-
played.
“Re-send”: Select to re-send the message. This switch is displayed if sending the text message has failed.
The message type which can be cre-
ated is SMS only.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Contacts” or “History” on
the sub menu.
4 Select desired contact or unregis-
tered number.
 If a registered number is selected,
this function cannot be performed.
5 Select .
6 Select “New”.
7 Enter the message and then select
“OK”.
8 Select “Send”.
“Cancel”: Select to cancel sending the message.
 While the message is being sent, a
sending message screen is dis-
played.
9 Check that a confirmation screen is
displayed when the operation is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●The short messages can contain up to 160 characters. The divided text will be
sent when the message body exceed over 160 characters.
●Depending on the cellular phone used for receiving messages, reply function may not be used.
15 messages have already been stored.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the desired message from
the list.
5 Select “Reply”.
6 Select the desired message.
7 Select “Send”.
“Cancel”: Select to cancel sending the message.
 While the message is being sent, a
sending message screen is dis-
Replying to a message (Create
new message)Replying to a message (Quick
reply)

202
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
played.
8 Check that a confirmation screen is
displayed when the operation is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
■Editing quick reply messages
This operation cannot be performed
while driving.
1 Select “Quick message”.
2 Select corresponding to the
desired message to edit.
3 Select “OK” when editing is com-
pleted.
●To reset the edited quick reply messages, select “Default”.
●Quick message #1 (“I am driving and will arrive in approximately [##] minutes.”):
This message cannot be edited and will automatically fill in [##] with the naviga-tion calculated estimated time of arrival
on the confirm message screen. If there are waypoints set, [##] to the next waypoint will be shown.
If there is no route currently set in the navigation system, Quick message #1 cannot be selected.
●Depending on the cellular phone used for receiving messages, reply function
may not be used.
Calls can be made to an e-
mail/SMS/MMS message sender’s
phone number.
This operation can be performed while
driving.
■Calling from e-mail/SMS/MMS
message display
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the desired message.
5 Select , or press the switch
on the steering wheel.
 If there are 2 or more phone num-
bers, select the desired number.
6 Check that the call screen is dis-
played.
■Calling from a number within a
message
Calls can be made to a number identi-
fied in a message’s text area in blue
font.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the desired message.
5 Select the text area.
Calling the message sender

203
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
6Select the desired number.
 Identified phone numbers contained
in the message are displayed.
7 Check that the call screen is dis-
played.
●A series of numbers may be recognized as a phone number. Additionally, some phone numbers may not be recognized,
such as those for other countries.
■Calling from the incoming mes-
sage screen
For detail, refer to “Receiving a mes-
sage”. ( P.199)

204
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
7-2.Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select the item to be set.
Connecting a phone ( P.43)
Sound settings ( P.204)
Notification settings ( P.205)
Contact/call history settings
( P.206)
Message settings ( P.211)
Lexus Euro assistance 24 settings
( P.212)
The call and ringtone volume can be
adjusted. A ringtone can be selected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Sounds”.
5 Select the desired item to be set.
Select to set the desired ringtone.
Select “-” or “+” to adjust the
ringtone volume.
Select “-” or “+” to adjust the default
volume of the other party’s voice.
Select to set the desired incoming
e-mail tone.
Phone settings
Displaying the phone settings
screen
Phone settings screen
A
B
C
D
E
“Sounds” screen
F
A
B
C
D