2018 Lexus LC500 display

205
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
Select to set the desired incoming
SMS/MMS tone.
Select “-” or “+” to adjust the
incoming SMS/MMS tone volume.
Select “-” or “+” to adjust the
incoming e-mail tone volume.
Select “-” or “+” to adjust the mes-
sage readout volume.
Select to reset all setup items.
●Depending on the type of phone, certain
functions may not be available.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Notifications”.
5 Select the desired item to be set.
Select to change where the screen
is displayed between the main dis-
play and side display.
• “Main screen”: Select to display and
operate the screen on the main display.
• “Side screen”: Select to display and
operate the screen on the side display.
For details of the screen: P.195
Select to set the SMS/MMS notifi-
cation pop-up on/off.
Select to change the incoming
SMS/MMS display.
• “Full screen”: When an SMS/MMS mes-
sage is received, the incoming
SMS/MMS display screen is displayed
and can be operated on the screen.
• “Drop-down”: When an SMS/MMS
message is received, a message is dis-
played on the upper side of the screen.
Select to set the e-mail notification
pop-up on/off.
Select to change the incoming e-
mail display.
• “Full screen”: When an e-mail is
received, the incoming e-mail display
screen is the displayed and can be oper-
ated on the screen.
• “Drop-down”: When an e-mail is
received, a message is displayed on the
upper side of the screen.
Select to set display of the con-
tact/history transfer completion
message on/off.
Select to reset all setup items.
●Depending on the phone, these functions
may not be available.
“Notifications” screen
E
F
G
H
I
A
B
C
D
E
F
G

207
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
2Select the desired item to be set.
Select to set automatic contact/his-
tory transfer on/off. When set to on,
the phone’s contact data and his-
tory are automatically transferred.
Select to update contacts from the
connected phone. ( P.207)
Select to set the transferred con-
tact image display on/off.
• When set to off, the contact image can-
not be displayed on the side display
when a call is received.
Select to reset all setup items.
■Updating contacts from phone
1 Select “Update now”.
 Contacts are transferred automati-
cally.
2 Check that a confirmation screen is
displayed when the operation is
complete.
 This operation may be unnecessary
depending on the type of cellular
phone.
 If another Bluetooth® device is con-
nected when transferring contact
data, depending on the phone, the
connected Bluetooth® device may
need to be disconnected.
 Depending on the type of
Bluetooth® phone being con-
nected, it may be necessary to per-
form additional steps on the phone.
When the contact is not registered
1 Select “Transfer contacts from
device”.
2 Select “From phone (Bluetooth*)”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
3 Transfer the contact data to the sys-
tem using a Bluetooth® phone.
 This operation may be unnecessary
depending on the type of cellular
phone.
 To cancel this function, select “Can-
cel”.
4 Check that a confirmation screen is
displayed when the operation is
complete.
 This function is only for OPP com-
patible Bluetooth® phone.
When the contact is registered
1 Select “Transfer contacts from
device”.
2 Select “From phone (Bluetooth*)”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
A
B
C
D
Transfer contacts from device
From phone

208
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
3Select “Replace contacts” or “Add
contact”.
“Replace contacts”: Select to transfer the contact from the connected cellular phone
and replace the current one.
“Add contact”: Select to transfer the
desired contact data from the connected cellular phone to add to the current one.
4 Transfer the contact data to the sys-
tem using a Bluetooth® phone.
 This operation may be unnecessary
depending on the type of cellular
phone.
 To cancel this function, select “Can-
cel”.
5 Check that a confirmation screen is
displayed when the operation is
complete.
 This function is only for OPP com-
patible Bluetooth® phone.
■Updating the contacts (From the
“History” screen)*
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “History” on the sub
menu and select a contact not yet
registered in the contact list.
4 Select “Update contact”.
5 Select the desired contact.
6 Select a phone type for the phone
number.
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic transfer” is set to off.
( P.206)
Backed-up contact data (“vCard” for-
matted) can be transferred from USB
device or Bluetooth® phone to this
system.
1 Slide the armrest as far back while
pressing the button.
2 Lift the armrest while pulling the
knob.
3 Open the cover and connect a
device or Bluetooth® phone.
From USB

209
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
Turn on the power of the USB
device if it is not turned on.
4 Select “Transfer contacts from
device”.
5 Select “From USB”.
6 Select “USB 1” or “USB 2” when
the multiple USB devices are con-
nected. If a USB device is con-
nected, skip this procedure.
7 Select “Replace contacts” or “Add
contact”. If the contact is not regis-
tered, skip this procedure.
“Replace contacts”: Select to transfer the
contact from the connected USB device or
Bluetooth® phone and replace the current
one.
“Add contact”: Select to transfer the
desired contact data from the connected
USB device or Bluetooth® phone to add
to the current one.
8 Select a desired file from vCard file
list.
9 Check that a confirmation screen is
displayed when the operation is
complete.
●Depending on the type of phone used
and number of files, it may take time to download contacts.
●Downloading may not complete cor-rectly in the following cases:• If the engine switch is
turned off during downloading.
• If the USB device or Bluetooth® phone is
removed before downloading is com- plete.
New contact data can be registered.
Up to 4 numbers per person can be
registered.
1 Select “New contact”.
2 Enter the name and select “OK”.
3 Enter the phone number and select
“OK”.
4 Select the phone type for the
phone number.
5 To add another number to this con-
tact, select “Yes”.
■Registering a new contact in a dif-
ferent way (From the “History”
screen)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “History” on the sub
menu and select a contact not yet
registered in the contact list.
4 Select “Add to contacts”.
5 Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
1 Select “Edit contact”.
2 Select the desired contact.
3 Select next to the name or
desired number.
4 Enter the name or the phone num-
ber and select “OK”.
Registering a new contact to the
contacts list
Editing the contact data

210
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
1Select “Delete contacts”.
2 Select the desired contact and
press the button on the Remote
Touch.
“Select all”: Select all items in the list.
“Unselect all”: Unselect all items in the list.
“Delete”: Delete selected items in the list.
3 Select “Delete”.
4 Select “Yes” when the confirmation
screen appears.
●Multiple data can be selected and deleted at the same time.
●When a Bluetooth® phone is deleted, the
contact data will be deleted at the same time.
Up to 15 contacts (maximum of 4 num-
bers per contact) can be registered in
the favourites list.
■Registering the contacts in the
favourites list
1 Select “Add favourites”.
2 Select the desired contact to add to
the favourites list.
 Dimmed contacts are already
stored as a favourites.
3 Check that a confirmation screen is
displayed when the operation is
complete.
When 15 contacts have already
been registered to the favourites list
1 When 15 contacts have already
been registered to the favourites
list, a registered contact needs to
be replaced.
Select “Yes” when the confirmation
screen appears to replace a con-
tact.
2 Select the contact to be replaced.
3 Check that a confirmation screen is
displayed when the operation is
complete.
Registering contacts in the favour-
ites list in a different way (from the
“Contact details” screen)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Contacts” on the sub
menu and select the desired con-
tact.
4 Select “Add favourites”.
5 Check that a confirmation screen is
displayed when the operation is
complete.
■Deleting the contacts in the favou-
rites list
1 Select “Remove favourites”.
2 Select the desired contacts and
press the button on the Remote
Touch.
“Select all”: Select all items in the list.
“Unselect all”: Unselect all items in the list.
“Remove”: Remove selected items in the
list.
Deleting the contact data
Favourites list setting

211
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
3Select “Remove”.
4 Select “Yes” when the confirmation
screen appears.
5 Check that a confirmation screen is
displayed when the operation is
complete.
Deleting contacts in the favourites
list in a different way (from the
“Contact details” screen)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Contacts” or
“Favourites” on the sub menu and
select the desired contact to delete.
4 Select “Remove favourites”.
5 Select “Yes” when the confirmation
screen appears.
6 Check that a confirmation screen is
displayed when the operation is
complete.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Messaging”.
5 Select the desired item to be set.
Select to set automatic message
transfer on/off.
Select to set automatic message
readout on/off.
Select to set updating message
read status on phone on/off.
Select to set display of messaging
account names on the inbox on/off.
When set to on, messaging
account names used on the cellular
phone will be displayed.
Select to change the vehicle signa-
ture settings. ( P.211)
Select to reset all setup items.
●Depending on the phone, these functions may not be available.
1 Select “Vehicle signature”.
“Messaging” screen
Vehicle signature settings
A
B
C
D
E
F

212
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
2Select the desired item to be set.
Select to set adding the vehicle sig-
nature to outgoing messages
on/off.
Select to edit the vehicle signature
( P.212)
Select to reset all setup items.
■Editing vehicle signature
1 Select “Edit vehicle signature”.
2 Enter desired signature with using
keyboard.
3 Select “OK”.
4 Select “OK” on the confirmation
screen, or select “Edit again” when
it needs to amend.
■Registering a country
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Lexus Euro assistance 24
settings”.
5 Select the registered country’s
screen button.
6 Select the country.
7 Check that a confirmation screen is
displayed when the operation is
complete.
■Registering a country in a different
way
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Favourites” on the sub
menu.
4 Select “Lexus Euro assistance 24”.
If a country has not been registered
5 Select the registered country’s
screen button.
6 Select a country.
7 Select “Yes” when the confirmation
screen appears.
If a country has already been regis-
tered
5 Select the registered country’s
screen button.
6 Select another country to replace
the existing country.
7 Select “Yes” when the confirmation
screen appears.
“Lexus Euro assistance 24 set-
tings” screen
A
B
C

214
-$@-$I@/BWJ@0.&@ &&

7-3. What to do if...
■Automatic Bluetooth® connec-
tion on this system is set to off.
Set automatic Bluetooth® connection
on this system to on when the engine
switch is in ACCES-
SORY or IGNITION ON mode mode>. ( P.49)
■Preferred device settings function
on this system is set to on.
Set preferred device settings function
on this system to off. ( P.49)
Set the desired cellular phone to the
highest automatic connection priority.
( P.50)
■Your vehicle is in a area.
Move to where no longer appears
on the display.
■The profile version of the con-
nected cellular phone may not be
compatible with transferring
phonebook data.
For a list of specific devices which
operation has been confirmed on this
system, check with your Lexus retailer
or Lexus authorized repairer, or any
reliable repairer.
■Automatic contact transfer func-
tion on this system is set to off.
Set automatic contact transfer function
on this system to on. ( P.206)
■Passcode has not been entered on
the cellular phone.
Enter the passcode on the cellular
phone if requested (default passcode:
1234).
■Transfer operation on the cellular
phone has not completed.
Complete transfer operation on the
cellular phone (approve transfer oper-
ation on the phone).
■Automatic contact transfer func-
tion on this system is set to on.
Set automatic contact transfer function
on this system to off. ( P.206)
■Message transfer is not enabled on
the cellular phone.
Enable message transfer on the cellu-
lar phone (approve message transfer
on the phone).
■Automatic transfer function on this
system is set to off.
Set automatic transfer function on this
When making/receiving a call
A call cannot be made/received.
When using the phonebook
Phonebook data cannot be trans-
ferred manually/automatically.
Phonebook data cannot be edited.
When using the Bluetooth® mes-
sage function
Messages cannot be viewed.