2018 KIA STONIC ignition

INSTRUMENT PANEL OVERVIEW
0:#
1. Instrument cluster.......................... .......................... p. 4-45
2. Horn...................................... ...................................... p. 4-39
3. Driver’s front air bag........................ ........................ p. 3-46
4. Light control............................... ............................... p. 4-81Turn signals................................ ................................ p. 4-84
5. Wiper/Washer.............................. .............................. p. 4-90
6. Ignition switch.............................. .............................. p. 6-06 ENGINE START/STOP button................. ................. p. 6-10
7. Hazard warning flasher switch............... ............... p. 7-02
8. Audio
9. Central door lock switch..................... ..................... p. 4-18
10. Climate control system............... ............... p. 4-99, 4-108
11. AUX-USB port.............................. .............................. p. 5-03
12. Shift lever............................ ............................ p. 6-20, 6-24
13. Parking brake lever.................................................... p. 6-31
14. Passenger’s front air bag.................... .................... p. 3-46
15. Power outlet.............................. .............................. p. 4-129
16. Glove box................................. ................................. p. 4-122
17. Steering wheel audio remote control
18. Cigarette lighter........................... ........................... p. 4-126
19. Seat warmer.............................. .............................. p. 4-128
20. Heated steering wheel switch................ ................ p. 4-39
21. Idle Stop and Go system OFF button.......... .......... p. 6-16
22. USB charger.............................................................. p. 4-130

2-05
2
Your vehicle at a glance

WARNING
•No modifications or additionsshould be made by the user whichwill either prevent the seat beltadjusting devices from operatingto remove slack, or prevent theseat belt assembly from being ad‐justed to remove slack.
•When you fasten the seat belt, becareful not to latch the seat belt inbuckles of other seat. It's verydangerous and you may not beprotected by the seat belt proper‐ly.
•Do not unfasten the seat belt anddo not fasten and unfasten theseat belt repeatedly while driving.This could result in loss of control,and an accident causing death, se‐rious injury, or property damage.
•When fastening the seat belt,make sure that the seat belt doesnot pass over objects that are hardor can break easily.
•Make sure there is nothing in thebuckle. The seat belt may not befastened securely.
Front seat belt warning (if
equipped)
(2"
As a reminder to the front seat belt,
the front seat belt warning lights will il‐ luminate for approximately 6 seconds
each time you turn the ignition switch
ON regardless of belt fastening.
If the front seat belt is not fastened when the ignition switch is turned ON
or if it is disconnected after the ignition
switch is turned ON, the corresponding seat belt warning light will illuminate
until the belt is fastened.
If you continue not to fasten the seat
belt and you drive over 9km/h, the illu‐ minated warning light will start to blink. If you continue not to fasten the seat
belt and you drive over 20km/h the
seat belt warning chime will sound for approximately 100 seconds and the
corresponding warning light will blink.
If you unfasten the seat belt while driv‐
ing under 20km/h the seat belt warning light will illuminate until the seat belt is
fastened.
WARNING
Riding in an improper position ad‐versely affects the front seat beltwarning system. It is important forthe driver to instruct the passengerto properly be seated as instructedin this manual.
NOTICE
•You can find the front passenger’s
seat belt warning light on the cen‐
ter fascia panel.
(Continued)
Safety features of your vehicle
3-14

(Continued)
•Although the front passenger seat
is not occupied, the seat belt
warning light will blink or illumi‐
nate for 6 seconds.
•The front passenger's seat belt
warning may operate when lug‐
gage is placed on the front pas‐
senger seat.
Rear passenger’s seat belt warning
(if equipped)
02-
If the ignition switch is turned ON (en‐
gine is not running) when the rear pas‐ senger's lap/shoulder belt is not fas‐
tened, the corresponding seat belt
warning light will illuminate until the belt is fastened.
And then, the rear corresponding seat
belt warning light will illuminate for ap‐
proximately 35 seconds, if any of fol‐ lowing occurs;
- You start the engine when the rear
belt is not fastened.
- You drive over 9km/h when the rear
belt is not fastened. -
The rear belt is disconnected when
driving under 20km/h.
If the rear seat belt is fastened, the
warning light will turn off immediately.
If the rear seat belt is disconnected
when you drive over the 20km/h, the corresponding seat belt warning light
will blink and warning chime will sound
for 35 seconds.
But, if the rear passenger's lap/shoul‐ der belt is/are connected and discon‐
nected twice within 9 seconds after the
belt is fastened, the corresponding seat
belt warning light will not operate.

3-15
3
Safety features of your vehicle

(Continued)
•Because the sensor that activates
the SRS air bag is connected with
the pre-tensioner seat belt, the
SRS air bag warning light on
the instrument panel will illumi‐
nate for approximately 6 seconds
after the ignition switch has been
turned to the ON position, and
then it should turn off.
CAUTION
If the pre-tensioner seat belt is notworking properly, the SRS air bagwarning light will illuminate even ifthere is no malfunction of the SRSair bag. If the SRS air bag warninglight does not illuminate when theignition key is turned to ON, or if itremains illuminated after illuminat‐ing for approximately 6 seconds, orif it illuminates while the vehicle isbeing driven, have the system in‐spected by a professional workshop.Kia recommends to visit an author‐ized Kia dealer/service partner.
WARNING
•Pre-tensioners are designed to op‐erate only one time. After activa‐tion, pre-tensioner seat beltsmust be replaced. All seat belts, ofany type, should always be re‐placed after they have been wornduring a collision.
•The pre-tensioner seat belt as‐sembly mechanisms become hotduring activation. Do not touch thepre-tensioner seat belt assembliesfor several minutes after theyhave been activated.
•Do not attempt to inspect or re‐place the pre-tensioner seat beltsyourself. Have the system inspec‐ted by a professional workshop.Kia recommends to visit an au‐thorized Kia dealer/service part‐ner.
•Do not strike the pre-tensionerseat belt assemblies.
•Do not attempt to service or repairthe pre-tensioner seat belt sys‐tem in any manner.
(Continued)
(Continued)
•Improper handling of the pre-ten‐sioner seat belt assemblies, andfailure to heed the warnings not tostrike, modify, inspect, replace,service or repair the pre-tensionerseat belt assemblies may lead toimproper operation or inadvertentactivation and serious injury.
•Always wear the seat belts whendriving or riding in a motor vehicle.
•If the vehicle or pre-tensioner seatbelt must be discarded, contact aprofessional workshop. Kia recom‐mends to visit an authorized Kiadealer/service partner.
CAUTION
Body work on the front area of thevehicle may damage the pre-ten‐sioner seat belt system. Therefore,have the system serviced by a pro‐fessional workshop. Kia recommendsto visit an authorized Kia dealer/service partner.
Safety features of your vehicle
3-22

(Continued)
•Keep the SRS parts and wiringsaway from water or any liquid. Ifthe SRS components are inopera‐tive due to exposure to water orliquids, it may cause fire or severeinjury.
How does the air bag system
operate
• Air bags are activated (able to inflateif necessary) only when the ignition
switch is turned to the ON or START position.
• Air bags inflate instantly in the event of a serious frontal collision or side
collision (if equipped with a side air
bag or curtain air bag) in order to
help protect the occupants from seri‐ ous physical injury.
NOTICE
nIf equipped with rollover sen‐
sor
(Continued)
(Continued)
Also, the air bags inflate instantly in
the event of a rollover (if equipped
with a side air bag or curtain air bag)
in order to help protect the occu‐
pants from serious physical injury.
• In normal conditions, the airbag is de‐ signed to deploy based on certain an‐
gle and intensity of the collision. These two factors are crucial ele‐
ments for deciding whether to trans‐
mit airbag deployment signal or start
the electrical operation or not.
• The airbag will deploy based on angle and intensity of the collision. It willnot deploy in every crash or collision
situations.
• The front air bags will completely in‐ flate and deflate in an instant.
It is virtually impossible for you to
see the air bags inflate during an ac‐
cident.
It is much more likely that you will simply see the deflated air bags
hanging out of their storage com‐
partments after the collision. • In order to help provide protection in
a severe collision, the air bags mustinflate rapidly. The speed of the air
bag inflation is a consequence of ex‐
tremely short time in which a collision
occurs and the need to inflate the air
bag between the occupant and the vehicle structures before the occu‐
pant impacts those structures.
This speed of inflation reduces the
risk of serious or life-threatening in‐
juries in a severe collision and is thus
a necessary part of the air bag de‐ sign.
However, air bag inflation can also
cause injuries which can include facial
abrasions, bruises and broken bones
because the inflation speed also cau‐ ses the air bags to expand with a
great deal of force.
•
There are even circumstances underwhich contact with the steeringwheel air bag can cause fatal injuries,especially if the occupant is posi‐tioned excessively close to the steer‐ing wheel.

3-39
3
Safety features of your vehicle

Air bag warning light
8
The purpose of the air bag warning
light in your instrument panel is to alert
you of a potential problem with your air bag - Supplemental Restraint Sys‐
tem (SRS).
When the ignition switch is turned ON,
the warning light should illuminate for approximately 6 seconds, then go off.
Have the system checked if: • The light does not turn on briefly when you turn the ignition ON.
• The light stays on after illuminating for approximately 6 seconds.
• The light comes on while the vehicle is in motion. • The light blinks when the ignition
switch is in ON position.
Passenger’s front air bag ON
indicator (if equipped)
The passenger's front air bag ON indicator illuminates
for approximately 4 secondsafter the ignition switch is
turned to the ON position.
The passenger's front air bag ON indi‐
cator also comes on when the passeng‐ er's front air bag ON/OFF switch is set
to the ON position and goes off after
approximately 60 seconds.
Passenger’s front air bag OFF
indicator (if equipped)
The passenger’s front air bag OFF indicator illuminates
for about 4 seconds afterthe ignition switch is turned
to the ON position.
The passenger’s front air bag OFF indi‐
cator also comes on when the passeng‐ er’s front air bag ON/OFF switch is set
to the OFF position and goes off when
the passenger’s front air bag ON/OFF switch is set to the ON position.
Safety features of your vehicle
3-42

CAUTION
If the passenger’s front air bagON/OFF switch malfunctions, thepassenger’s front air bag OFF indica‐tor will not illuminate (The passeng‐er's front air bag ON indicator comeson and goes off after approximately60 seconds) and the passenger’sfront air bag will inflate in a frontalimpact even if the passenger’s frontair bag ON/OFF switch is set to theOFF position.In this case, have the passenger'sfront air bag ON/OFF switch and theSRS air bag system inspected by aprofessional workshop.Kia recommends to visit an author‐ized Kia dealer/service partner.
SRS components and functions
The SRS consists of the following com‐
ponents: 1. Driver's front air bag module *
2. Passenger's front air bag module *
3. Side air bag modules *
4. Curtain air bag modules *
5. Retractor pre-tensioner assem‐ blies *
6. Air bag warning light
7. SRS control module (SRSCM) / Roll‐ over sensor *
* if equipped 8.
Side impact sensors *
9. Passenger’s front air bag ON/OFF switch *
10. Passenger’s front air bag ON/OFF indicator *
The SRSCM continually monitors all SRS components while the ignition switch is
ON to determine if a crash impact is se‐
vere enough to require air bag deploy‐ ment or pre-tensioner seat belt de‐
ployment.
The SRS air bag warning light "
" on
the instrument panel will illuminate for
about 6 seconds after the ignition
switch is turned to the ON position, af‐ ter which the SRS air bag warning light
"
" should go out.
WARNING
If any of the following conditions oc‐curs, this indicates a malfunction ofthe SRS. In this case, have the sys‐tem inspected by a professionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.
(Continued)

3-43
3
Safety features of your vehicle

(Continued)
•The light does not turn on brieflywhen you turn the ignition ON.
•The light stays on after illuminat‐ing for approximately 6 seconds.
•The light comes on while the vehi‐cle is in motion.
•The light blinks when the ignitionswitch is in ON position.
*if equipped
%SJWFSLÓT
GSPOU
BJS
CBH


The air bag modules are located both in
the center of the steering wheel and in the front passenger's panel above the
glove box. When the SRSCM detects a
sufficiently severe impact to the front of the vehicle, it will automatically de‐
ploy the front air bags.
%SJWFSLÓT
GSPOU
BJS
CBH


Upon deployment, tear seams molded
directly into the pad covers will sepa‐ rate under pressure from the expan‐
sion of the air bags. Further opening of
the covers then allows full inflation of the air bags.
Safety features of your vehicle
3-44