
• Lock the doors by pressing thelock button on the smart key.
After completion of the steps
above, the hazard warning lights
will operate once to indicate thatthe system is armed.
If any door (and tailgate) or en‐
gine hood remains open, the haz‐
ard warning lights won't operate
and theft-alarm will not arm. Af‐
ter this, if all doors (and tailgate)
and engine hood are closed, thehazard warning lights blink once.
Using the transmitter
Park the vehicle and stop the engine.
Arm the system as described below. 1. Turn off the engine and remove the ignition key from the ignition
switch.
2. Make sure that all doors (and tail‐ gate), the engine hood are closed
and latched. 3. Lock the doors by pressing the lock
button on the transmitter.
After completion of the steps
above, the hazard warning lights
will blink once to indicate that the
system is armed.
If any door (and tailgate) or engine
hood remains open, the hazard
warning lights won't operate and
theft-alarm will not arm. After this,if all doors (and tailgate) and engine
hood are closed, the hazard warn‐
ing lights blink once.
•
Do not arm the system until all pas‐sengers have left the vehicle. If thesystem is armed while a passenger(s)remains in the vehicle, the alarm maybe activated when the remaining pas‐senger(s) leave the vehicle. If anydoor, tailgate or engine hood isopened within 30 seconds after en‐tering the armed stage, the systemis disarmed to prevent unnecessaryalarm.
Theft-alarm stage
The alarm will be activated if any of the
following occurs while the system is armed. • A door is opened without using the transmitter (or smart key). • The tailgate is opened without using
the transmitter (or smart key).
• The engine hood is opened.
The horn will sound and the hazard
warning lights will blink continuously for approximately 30 seconds. To turn
off the system, unlock the doors with
the transmitter (or smart key).
Disarmed stage
The system will be disarmed when:
Transmitter
- The door unlock button is pressed.
- The engine is started.
- The ignition switch is in the L

After pressing the unlock button, if any
door (or tailgate) is not opened within 30 seconds, the system will be re‐
armed.
NOTICE
nNon-immobilizer system
•Avoid trying to start the engine
while the alarm is activated. The
vehicle starting motor is disabled
during the theft-alarm stage.
If the system is not disarmed with
the transmitter, insert the key in‐
to the ignition switch, turn the ig‐
nition switch to the ON position
and wait for 30 seconds. Then the
system will be disarmed.
•If you lose your keys, Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
NOTICE
nImmobilizer system
(Continued)
(Continued)
•If the system is not disarmed with
the transmitter, insert the key in‐
to the ignition switch and start the
engine. Then the system will be
disarmed.
•If you lose your keys, Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
CAUTION
Do not change, alter or adjust thetheft-alarm system because it couldcause the theft-alarm system tomalfunction. Have the system serv‐iced by a professional workshop. Kiarecommends to visit an authorizedKia dealer/service partner.Malfunctions caused by improper al‐terations, adjustments or modifica‐tions to the theft-alarm system arenot covered by your vehicle manu‐facturer warranty.
4-15
4
Features of your vehicle

(Continued)
•The doors should always be fullyclosed and locked while the vehicleis in motion to prevent accidentalopening of the door. Locked doorswill also discourage potential in‐truders when the vehicle stops orslows down.
•Be careful when opening doors andwatch for vehicles, motorcycles,bicycles or pedestrians approach‐ing the vehicle in the path of thedoor. Opening a door when some‐thing is approaching can causedamage or injury.
WARNING
nUnlocked vehicles
Leaving your vehicle unlocked can in‐vite theft or possible harm to you orothers from someone hiding in yourvehicle while you are gone. Alwaysremove the ignition key, engage theparking brake, close all windows andlock all doors when leaving your ve‐hicle unattended.
WARNING
nUnattended children
An enclosed vehicle can become ex‐tremely hot, causing death or severeinjury to unattended children or ani‐mals who cannot escape the vehicle.Furthermore, children might operatefeatures of the vehicle that could in‐jure them, or they could encounterother harm, possibly from someonegaining entry to the vehicle. Neverleave children or animals unattendedin your vehicle.
Impact sensing door unlock
system (if equipped)
All doors will automatically unlock after
an impact causes the air bags to de‐ ploy.
Speed sensing door lock system
(if equipped)
All doors will be automatically locked
after the vehicle speed exceeds 15 km/h. And all doors will be automat‐
ically unlocked when you turn the en‐ gine off and when you remove the igni‐
tion key. (if equipped)
Child-protector rear door lock
The child safety lock is provided to help
prevent children from accidentally opening the rear doors from inside the
vehicle. The rear door safety locks
should be used whenever children are in the vehicle. 1. Open the rear door.
2. Insert a key (or screwdriver) into the hole and turn it to the lock (
)
position. When the child safety lock
is in the lock position, the rear door
will not open even though the inner
door handle is pulled.
3. Close the rear door.
4-19
4
Features of your vehicle

WINDOWS
1. Driver’s door power window switch
2. Front passenger’s door power win‐dow switch
3. Rear door (left) power window switch *
4. Rear door (right) power window switch *
5. Window opening and closing6. Automatic power window up *
/
down *
(Driver’s window)
7. Power window lock switch *
NOTICE
In cold and wet climates, power win‐
dows may not work properly due to
freezing conditions.
Power windows (if equipped)
The ignition switch must be in the ON
position for power windows to operate.
* if equipped
4-23
4
Features of your vehicle

Each door has a power window switch
that controls the door's window. The driver has a power window lock switch
which can block the operation rear pas‐
senger windows. The power windows can be operated for approximately
30 seconds after the ignition key is re‐
moved or turned to the ACC or LOCK position. However, if the front doors
open, the power windows cannot be
operated within the 30 second period after ignition key removal (if equipped).
If the window cannot be close because
it is blocked by objects, remove the ob‐
jects and close the window.
NOTICE
While driving with the rear windows
down or with the sunroof (if equip‐
ped) in an open (or partially open po‐
sition), your vehicle may demon‐
strate a wind buffeting or pulsation
noise. This noise is a normal occur‐
rence and can be reduced or elimina‐
ted by taking the following actions.
If the noise occurs with one or both
of the rear windows down, partially
lower both front windows approxi‐
(Continued)
(Continued)
mately one inch. If you experience
the noise with the sunroof open,
slightly reduce the size of the sun‐
roof opening.
WARNING
Do not install any accessories in thearea of windows. It may impact jamprotection.
Window opening and closing
The driver’s door has a master power
window switch that controls all the windows in the vehicle.
To open or close a window, press down
or pull up the front portion of the cor‐
responding switch to the first detent position (5).
Features of your vehicle
4-24

Auto up/down window (if equipped)
Pressing or pulling up the power win‐
dow switch momentarily to the second detent position (6) completely lowers
or lifts the window even when the
switch is released. To stop the window at the desired position while the win‐
dow is in operation, pull up or press and
release the switch to the opposite di‐
rection of the movement.
If the power window is not operated
correctly, the automatic power window
system must be reset as follows: 1. Turn the ignition switch to the ON position. 2. Close the window and continue
pulling up on the driver’s power
window switch for at least 1 sec‐
ond after the window is completely closed.
Automatic reversal
If the upward movement of the window
is blocked by an object or part of the
body, the window will detect the resist‐
ance and will stop upward movement.
The window will then lower approxi‐ mately 30 cm (11.8 in.) to allow the ob‐
ject to be cleared. If the window detects the resistance
while the power window switch is
pulled up continuously, the window will
stop upward movement then lower ap‐ proximately 2.5 cm (1 in.).
And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered by the automatic window reversal feature,
the automatic window reversal will not
operate.
NOTICE
The automatic reverse feature for
the driver’s window is only active
when the L

(Continued)
juries or vehicle damage. If an objectless than 4 mm (0.16 in.) in diameteris caught between the window glassand the upper window channel, theautomatic reverse window may notdetect the resistance and will notstop and reverse direction.
WARNING
The automatic reverse featuredoesn't active while resetting powerwindow system.Make sure body parts or other ob‐jects are safely out of the way be‐fore closing the windows to avoid in‐juries or vehicle damage.
Power window lock button (if
equipped)
• The driver can disable the power win‐dow switches on the rear passenger
doors by pressing the power window lock button located on the driver’s
door to the LOCK position (pressed).
•
When the power window lock buttonis in the LOCK position (pressed), thedriver’s master control can operateall power windows. Also, the frontpassenger’s control can operate thefront passenger’s power window.
CAUTION
•To prevent possible damage to thepower window system, do notopen or close two windows ormore at the same time. This willalso ensure the longevity of thefuse.
•Never try to operate the mainswitch on the driver's door and theindividual door window switch inopposite directions at the sametime. If this is done, the windowwill stop and cannot be opened orclosed.
WARNING
nWindows
•NEVER leave the ignition key in thevehicle with unsupervised children,when the engine is running.
(Continued)
Features of your vehicle
4-26

SUNROOF (IF EQUIPPED)
If your vehicle is equipped with a sun‐
roof, you can slide or tilt your sunroof with the sunroof control lever located
on the overhead console.
The sunroof can only be opened,
closed, or tilted when the ignition switch is in the ON position.
NOTICE
•In cold and wet climates, the sun‐
roof may not work properly due to
freezing conditions.
(Continued)
(Continued)
•After a vehicle is washed or in a
rainstorm be sure to wipe off any
water that is on the sunroof be‐
fore operating it.
CAUTION
•Do not continue to move the sun‐roof control lever after the sun‐roof is fully opened, closed, or til‐ted. Damage to the motor or sys‐tem components could occur.
•Make sure the sunroof is closedfully when leaving your vehicle.If the sunroof is open, rain or snowmay leak through the sunroof andwet the interior as well as causetheft.
NOTICE
The sunroof cannot slide when it is
in the tilt position nor can it be tilted
while in an open or slide position.
WARNING
Never adjust the sunroof or sun‐shade while driving. This could resultin loss of control and an accidentthat may cause death, serious in‐jury, or property damage.
WARNING
•In order to prevent accidental op‐eration of the sunroof, especiallyby a child, do not let a child oper‐ate the sunroof.
•Do not sit on the top of the vehi‐cle. It may cause vehicle damage.
4-33
4
Features of your vehicle