2018 KIA STONIC fuel

LCD Modes (for type C,D cluster)
1. Trip Computer modeThis mode displays driving informa‐
tion like the tripmeter, fuel econo‐
my, and so on.
For more details, refer to L

- After Ignition : The average fueleconomy will reset automatically
whenever it has passed 4 hours after turning OFF the engine.
- After Refueling : The average fuel economy will reset automatically
when refueling.
•
Fuel Economy Unit
To select the fuel economy unit.
(km/L ↔ L/100km, UK gallon ↔ US
gallon)
•
Temperature Unit
To select the temperature unit. (°C, °F)
Language
Choose the language
Reset
You can reset the menus in the User
Settings Mode. All menus in the User Settings Mode are initialized, except
language and service interval.
Warning messages
Warning messages appear on the LCD
to warn the driver. It is located in the center of the instrument cluster.
The warning message may appear dif‐
ferently depending on the type of in‐
strument cluster and some may not show the warning message at all. The warning message is shown in ei‐
ther symbol, symbol and text, or text
type only.
Door, hood, tailgate open
• This warning is displayed indicating which door, or the hood, or the tail‐
gate is open.
Sunroof open(if equipped)
• This warning is displayed if you turn off the engine when the sunroof is
open.
Engine has overheated
• This warning message illuminates
when the engine coolant temperature
is above 120°C (248°F). This means
that the engine is overheated and may be damaged.
❈ If your vehicle is overheated, refer
to L

(Continued)
the steering effort may increase or
decrease.
In this case, have the vehicle inspec‐
ted by a professional workshop as
soon as possible.
Kia recommends to visit an author‐
ized Kia dealer/service partner.
Electronic Power
Steering (EPS) Warning
Light (if equipped)
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - This indicator light comes on after the ignition key is turned to the
ON position and then goes out af‐
ter approximately 3 seconds.
• When there is a malfunction with the EPS.
In this case, have the vehicle inspec‐ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Malfunction Indicator
Lamp (MIL)
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It remains on until the engine is started.
• When there is a malfunction with the emission control system.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia recommends to visit an authorized
Kia dealer/service partner.
CAUTION
nMalfunction Indicator Lamp(MIL)
Driving with the Malfunction Indica‐tor Lamp (MIL) on may cause dam‐age to the emission control systemswhich could effect drivability and/orfuel economy.
CAUTION
nGasoline Engine
If the Malfunction Indicator Lamp(MIL) illuminates, potential catalyticconverter damage is possible whichcould result in loss of engine power.In this case, have the vehicle inspec‐ted by a professional workshop assoon as possible.Kia recommends to visit an author‐ized Kia dealer/service partner.
CAUTION
nDiesel Engine
If the Malfunction Indicator Lamp(MIL) blinks, some error related tothe injection quantity adjustmentoccurs which could result in loss ofengine power, combustion noise andpoor emission.In this case, have the engine controlsystem inspected by a professionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.

4-67
4
Features of your vehicle

Overspeed Warning Light
(if equipped)
This warning light blinks:
• When you drive the vehi‐ cle more than 120 km/h.- This is to prevent you from driving your vehicle with overspeed.
- The overspeed warning chime also sound for approximately 5 sec‐ onds.
120km/h
Master Warning Light
This indicator light illumi‐nates:
• This warning light informs the driver the following situations- TPMS failure, low pressure (if equipped)
- Low engine oil (if equipped)
- Forward Collision-Avoidance Assist (FCA) system (if equipped) failure
- Blind-Spot Collision Warning (BCW) malfunction (if equipped)
If the warning situation is solved, the master warning light will turn off.
Exhaust system (DPF)
warning light (Diesel
Engine)
This warning light illumi‐nates:
• When there is a malfunction with Die‐ sel Particulate Filter (DPF) system.
• When this warning light illuminates, it may turn off after driving the vehicle:- at more than 60 km/h (37 mph), or
- at more than 2nd gear with 1500 ~ 2000 engine rpm for a certain time (for about 25 minutes).
If this warning light blinks in spite of
the procedure (at this time the LCD warning message will be displayed),
have the DPF system checked by a pro‐
fessional workshop. Kia recommends to visit an authorized Kia dealer/ service
partner.
CAUTION
nDiesel Engine with DPF (ifequipped)
(Continued)
(Continued)
If you continue to drive with the DPFwarning light blinking for a longtime, the DPF system can be dam‐aged and fuel consumption can wor‐sen.
Door Ajar Warning Light
(if equipped)
This warning light illumi‐nates:
When a door is not closed securely.
Tailgate Open Warning
Light (if equipped)
This warning light illumi‐nates:
When the tailgate is not closed secure‐
ly.
Washer Fluid Warning
Light (if equipped)
This warning light illumi‐nates:
• When the washer fluid level in the reservoir is nearly empty.
In this case, you should refill the
washer fluid.

4-71
4
Features of your vehicle

ISG (IDLE STOP AND GO) SYSTEM (IF EQUIPPED)
Your vehicle may be equipped with the
ISG system, which reduces fuel con‐ sumption by automatically shutting
down the engine, when the vehicle is at
a standstill. (For example : red light, stop sign and traffic jam)
The engine starts automatically as
soon as the starting conditions are
met.
The ISG system is ON whenever the en‐ gine is running.
NOTICE
When the engine automatically
starts by the ISG system, some
warning lights (ABS, ESC, ESC OFF,
EPS or Parking brake warning light)
may turn on for a few seconds.
This happens because of low battery
voltage. It does not mean the sys‐
tem is malfunctioning.
Auto stop
To stop the engine in idle stop
mode
• Manual transaxle 1. Decrease the vehicle speed to less than 5 km/h.
2. Shift into N (Neutral) position.
3. Release the clutch pedal.
• Automatic transaxle 1. Decrease the vehicle speed to less than 5 km/h.
2. Press the brake pedal. The engine will stop and the green AU‐
TO STOP indicator (
) on the instru‐
ment cluster will illuminate. If your ve‐ hicle is equipped with a supervision
cluster, the notice will illuminate on the
LCD display.
Driving your vehicle
6-16

ECONOMICAL OPERATION
Your vehicle's fuel economy depends mainly on your style of driving, where
you drive and when you drive.
Each of these factors affects how
many kilometers (miles) you can get from a liter (gallon) of fuel. To operate
your vehicle as economically as possi‐
ble, use the following driving sugges‐ tions to help save money in both fuel
and repairs: • Drive smoothly. Accelerate at a mod‐ erate rate. Don't make "jackrabbit"
starts or full-throttle shifts and maintain a steady cruising speed.
Don't race between stoplights. Try to
adjust your speed to the traffic so
you don't have to change speeds un‐
necessarily. Avoid heavy traffic whenever possible.
Always maintain a safe distance from
other vehicles so you can avoid un‐
necessary braking. This also reduces
brake wear.
• Drive at a moderate speed. The fast‐ er you drive, the more fuel your vehi‐cle uses. Driving at a moderate
speed, especially on the highway, is
one of the most effective ways to re‐
duce fuel consumption. • Don't "ride" the brake pedal. This can
increase fuel consumption and also
increase wear on these components.
In addition, driving with your foot
resting on the brake pedal may cause
the brakes to overheat, which re‐ duces their effectiveness and may
lead to more serious consequences.
• Take care of your tires. Keep them inflated to the recommended pres‐
sure. Incorrect inflation, either too
much or too little, results in unneces‐ sary tire wear. Check the tire pres‐
sures at least once a month.
• Be sure that the wheels are aligned correctly. Improper alignment can re‐
sult from hitting curbs or driving too fast over irregular surfaces. Poor
alignment causes faster tire wear
and may also result in other prob‐
lems as well as greater fuel con‐
sumption.
• Keep your car in good condition. For better fuel economy and reduced
maintenance costs, maintain your car
in accordance with the maintenance
schedule in L

• Use your air conditioning sparingly.The air conditioning system is oper‐
ated by engine power so your fuel economy is reduced when you use it.
• Open windows at high speeds can re‐ duce fuel economy.
• Fuel economy is less in crosswinds and headwinds. To help offset some
of this loss, slow down when driving
in these conditions.
Keeping a vehicle in good operating
condition is important both for econo‐
my and safety. Therefore, have the system serviced by a professional
workshop.
Kia recommends to visit an authorized
Kia dealer/service partner.
WARNING
nEngine off during motion
Never turn the engine off to coastdown hills or anytime the vehicle isin motion. The power steering andpower brakes will not function prop‐erly without the engine running. In‐stead, keep the engine on and down‐
(Continued)
(Continued)
shift to an appropriate gear for en‐gine braking effect. In addition, turn‐ing off the ignition while drivingcould engage the steering wheel lockresulting in loss of vehicle steeringwhich could cause serious injury ordeath.

6-77
6
Driving your vehicle

Remember that trailering is different
than just driving your vehicle by itself. Trailering means changes in handling,
durability, and fuel economy. Success‐
ful, safe trailering requires correct equipment, and it has to be used prop‐
erly.
This section contains many time-tes‐
ted, important trailering tips and safety
rules. Many of these are important for your safety and that of your passen‐
gers. Please read this section carefully
before you pull a trailer.
Load-pulling components such as the engine, transaxle, wheel assemblies,
and tires are forced to work harder
against the load of the added weight. The engine is required to operate at
relatively higher speeds and under
greater loads. This additional burden generates extra heat. The trailer also
considerably adds wind resistance, in‐
creasing pulling requirements.
0:#%
NOTICE
nLocation of trailer mounting
CUV
After removing rear bumper and
back beam, hitch equipment can be
installed. The rear bumper should be
reinstalled after completion of hitch
equipment installation.
Hitches
It's important to have the correct hitch
equipment. Crosswinds, large trucks going by, and rough roads are a few
reasons why you’ll need the right hitch.
Here are some rules to follow: • Do you have to make any holes in the
body of your vehicle when you installa trailer hitch? If you do, then be sure
to seal the holes later when you re‐
move the hitch.
If you don’t seal them, deadly carbon
monoxide (CO) from your exhaust can get into your vehicle, as well as
dirt and water.
• The bumpers on your vehicle are not intended for hitches. Do not attach
rental hitches or other bumper-type
hitches. Use only a frame-mounted hitch that does not attach to the
bumper.
• Kia trailer hitch accessary is available at an authorized Kia dealer/service
partner.
Safety chains
You should always attach chains be‐
tween your vehicle and your trailer. Cross the safety chains under the
tongue of the trailer so that the tongue
will not drop to the road if it becomes separated from the hitch.

6-87
6
Driving your vehicle