2018 KIA STONIC buttons

SMART KEY (IF EQUIPPED)
09.
With a smart key, you can lock or un‐
lock a door (and tailgate) and even start the engine without inserting the
key.
The functions of buttons on a smart
key are similar to the folding key.
Smart key functions
Carrying the smart key, you may lock
and unlock the vehicle doors (and tail‐ gate). Also, you may start the engine.
Refer to the following, for more details.
Locking
Pressing the button of the front out‐
side door handles with all doors (and tailgate) closed and any door unlocked,
locks all the doors (and tailgate). If all
doors (and tailgate) and engine hood are closed, the hazard warning lights
will blink once to indicate that all doors
(and tailgate) are locked. The button will only operate when the
smart key is within 0.7~1 m (28~40 in.)
from the outside door handle. If you
want to make sure that a door has locked or not, you should check the
door lock button inside the vehicle or
pull the outside door handle.
Even though you press the outside door
handle buttons, the doors will not lock and the chime will sound for 3 seconds
if any of following occur: • The smart key is in the vehicle.
• The ENGINE START/STOP button is in the ACC or ON position.
• Any door except the tailgate is open.
Unlocking
Pressing the button of the front out‐
side door handles with all doors (and tailgate) closed and locked, unlocks all
the doors (and tailgate). The hazard
warning lights blink twice to indicate that all doors (and tailgate) are un‐
locked.
The button will only operate when the
smart key is within 0.7~1 m (28~40 in.) from the outside door handle.
Features of your vehicle
4-10

NOTICE
Never place anything over the sen‐
sor located on the instrument panel
to ensure better control of the heat‐
ing and cooling system.
Manual heating and air
conditioning
The heating and cooling system can be
controlled manually by pushing buttons other than the AUTO button. In this
case, the system works sequentially
according to the order of buttons selec‐ ted. When pressing any button (or turning
any knob) except the AUTO button
while using automatic operation, the
functions not selected will be controlled automatically. 1. Start the engine.
2. Set the mode to the desired posi‐ tion.
To improve the effectiveness of
heating and cooling: - Heating:
- Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to con‐ vert to full automatic control of the
system.
Mode selection
The mode selection button controls the
direction of the air flow through the ventilation system.
The air flow outlet port is converted as
follows:
Refer to the illustration in the L

OFF mode
Press the OFF button to turn off the air
climate control system. However, you can still operate the air intake buttons
as long as the ignition switch is in the
ON position.
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if
equipped) on.
• If the windshield fogs up, set the mode to the
or position.
Operation Tips
• To keep dust or unpleasant fumes from entering the vehicle through the
ventilation system, temporarily set the air intake control to the recircula‐
ted air position. Be sure to return the
control to the fresh air position when
the irritation has passed to keep
fresh air in the vehicle. This will help keep the driver alert and comforta‐
ble. • Air for the heating/cooling system is
drawn in through the grilles just
ahead of the windshield. Care should
be taken that these are not blocked by leaves, snow, ice or other obstruc‐
tions.
• To prevent interior fog on the wind‐ shield, set the air intake control to
the fresh air position and fan speed to the desired position, turn on the
air conditioning system, and adjust
the temperature control to desired
temperature.
Air conditioning
Kia Air Conditioning Systems are filled
with environmentally friendly refriger‐
ant *
.
1. Start the engine. Push the air con‐ ditioning button.
2. Set the mode to the
position.
* Your vehicle is filled with R-134a or
R-1234yf according to the regula‐tion in your country at the time of
producing. You can find out which air
conditioning refrigerant is applied
your vehicle at the label inside of en‐
gine room. Refer to L