2018 KIA STONIC battery

Folding the outside rearview mirror
Electric Type (if equipped)
To fold the outside rearview mirror, de‐
press the button.
To unfold it, depress the button again.
CAUTION
The electric type outside rearviewmirror operates even though the ig‐nition switch is in the OFF position.However, to prevent unnecessarybattery discharge, do not adjust themirrors longer than necessary whilethe engine is not running.
CAUTION
In case it is an electric type outsiderearview mirror, don’t fold it byhand. It could cause motor failure.
0:##
Manual type
To fold outside rearview mirror, grasp
the housing of mirror and then fold it toward the rear of the vehicle.
Features of your vehicle
4-44

LCD WINDOWS (IF EQUIPPED)

Overview
0:##
'PS
UZQF
$

%
DMVTUFS
LCD windows show the following vari‐
ous information to drivers.
- Trip information
- LCD modes
- Warning messages
Trip information (Trip computer)
The trip computer is a microcomputer-
controlled driver information system that displays information related to
driving.
NOTICE
Some driving information stored in
the trip computer (for example
Average Vehicle Speed) resets if the
battery is disconnected.
Trip Modes
- For Type A, B clusterLÜ
5SJQNFUFS
<">
LÜ
&MBQTFE
5JNF
<">
LÜ
"WFSBHF
7FIJDMF
4QFFE
<">
53*1
"
LÜ
5SJQNFUFS
<#>
LÜ
&MBQTFE
5JNF
<#>
LÜ
"WFSBHF
7FIJDMF
4QFFE
<#>
53*1
#
LÜ
%JTUBODF
5P
&NQUZ
LÜ
"WFSBHF
'VFM
&DPOPNZ
LÜ
*OTUBOU
'VFM
&DPOPNZ
'6&-
&$0/0.:
LÜ
4FSWJDF
SFNJOEFS
4FSWJDF
LÜ
4QFFE
0O0GG
4QFFE


4-53
4
Features of your vehicle

NOTICE
•The average vehicle speed is not
displayed if the driving distance is
less than 50 meters or the driving
time is less than 10 seconds since
the ignition switch is turned to ON.
•Even if the vehicle is not in motion,
the average vehicle speed keeps
going while the engine is running.
Fuel Economy
0:#$
5ZQF
"

#
DMVTUFS
0:#$
5ZQF
$

%
DMVTUFS
Distance To Empty (1)
• The distance to empty is the estima‐ ted distance the vehicle can be driven
with the remaining fuel. - Distance range: 1 ~ 9,999 km or 1 ~ 9,999 mi.
• If the estimated distance is below 1 km (1 mi.), the trip computer will
display "---" as distance to empty.
NOTICE
•If the vehicle is not on level ground
or the battery power has been in‐
terrupted, the distance to empty
function may not operate correct‐
ly.
•The distance to empty may differ
from the actual driving distance as
it is an estimate of the available
driving distance.
•The trip computer may not regis‐
ter additional fuel if less than
6 liters (1.6 gallons) of fuel are
added to the vehicle.
(Continued)

4-55
4
Features of your vehicle

Shift to P (for smart key system
and automatic transaxle)
• This warning message illuminates ifyou try to turn off the engine with‐
out the shift lever in P (Park) position.
• At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop But‐
ton once more, it will turn to the ON position).
Low Key Battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if
the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lockwhen the Engine Start/Stop Button
changes to the OFF position.
Check Steering Wheel Lock System
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system and
automatic transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Press clutch pedal to start engine
(for smart key system and manual
transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by
pressing the button repeatedly with‐ out depressing the clutch pedal.
• It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates ifthe smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if
the smart key is not detected when
you press the Engine Start/Stop But‐ ton.
Features of your vehicle
4-62

This indicator light blinks:
• When there is a malfunction with the immobilizer system.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia recommends to visit an authorized
Kia dealer/service partner.
Immobilizer Indicator
Light (With Smart Key)
This indicator light illumi‐nates for up to 30 seconds:
• When the vehicle detects the smart key in the vehicle properly while the
Engine Start/Stop Button is ACC or
ON. - At this time, you can start the en‐ gine.
- The indicator light goes off after starting the engine.
This indicator light blinks for a few sec‐onds:
• When the smart key is not in the ve‐ hicle.- At this time, you can not start the engine.
This indicator light illuminates for 2seconds and goes off:
• When the vehicle can not detect the smart key which is in the vehiclewhile the Engine Start/Stop Button is
ON.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia
recommends to visit an authorized Kia dealer/service partner.
This indicator light blinks:
• When the battery of the smart key is weak.- At this time, you can not start the engine. However, you can start the
engine if you press the Engine
Start/Stop Button with the smart
key. (For more details, refer to
L

LIGHTING
Battery saver function
• The purpose of this feature is to pre‐vent the battery from being dis‐
charged. The system automatically
turns off the parking lights when the driver removes the ignition key
(smart key: turns off the engine) and
opens the driver-side door.
• With this feature, the parking lights will be turned off automatically if the
driver parks on the side of road at night.
If necessary, to keep the lights on
when the ignition key is removed,
(smart key: turns off the engine) per‐form the following: 1. Open the driver-side door.
2. Turn the parking lights OFF and ON again using the light switch on the
steering column.
Headlight escort function (if
equipped)
The headlights (and/or taillights) will
remain on for approximately 5 minutes after the ignition key is removed when
the engine is turned off. However, if
the driver’s door is opened and closed, the headlights are turned off after 15
seconds. The headlights can be turned off by
pressing the lock button on the trans‐ mitter (or smart key) twice or turning
off the light switch from the headlight
or Auto light position.
CAUTION
If the driver gets out of the vehiclethrough other doors (except driver'sdoor), the battery saver functiondoes not operate and the headlightescort function does not turn off au‐tomatically. Therefore, it causes thebattery to be discharged. In thiscase, make sure to turn off the lampbefore getting out of the vehicle.
Headlight welcome function (if
equipped)
When the headlight switch is in the ON
or AUTO position and all doors (and tail‐ gate) are closed and locked, if you press
the door unlock button on the trans‐
mitter (or smart key), the headlights
will come on for about 15 seconds.
If the headlight switch is in the AUTO position, the function can only operate
at night. At this time, if you press the door un‐
lock button again or door lock button on the transmitter (or smart key), the
headlights will turn off immediately.
Features of your vehicle
4-80

The high beam indicator will light when
the headlight high beams are switched on. To prevent the battery from being
discharged, do not leave the lights on
for a prolonged time while the engine is not running.
WARNING
Do not use high beam when thereare other vehicles. Using high beamcould obstruct the other driver's vi‐sion.
¥
5ZQF
"
To flash the headlights, pull the lever
towards you. It will return to the nor‐ mal (low beam) position when released.
The headlight switch does not need to
be on to use this flashing feature .
Turn signals and lane change
signals
¥
5ZQF
"
¥
5ZQF
#
Features of your vehicle
4-84

INTERIOR LIGHT
CAUTION
Do not use the interior lights for ex‐tended periods when the engine isnot running.It may cause battery discharge.
WARNING
Do not use the interior lights whendriving in the dark. Accidents couldhappen because the view may beobscured by interior lights.
Map lamp
¥
5ZQF
"
¥
5ZQF
#
• (1) : Press the lamps to turn thefront map lamps on and off. •
(2):
- The map lamp and room lamp comes on when a door is opened.
The lamps go out after approxi‐
mately 30 seconds.
- The map lamp and room lamp comes on for approximately 30
seconds when doors are unlocked
with a transmitter or smart key as
long as the doors are not opened.
- The map lamp and room lamp will stay on for approximately 20 mi‐
nutes if a door is opened with the
ignition switch in the ACC or
LOCK/OFF position.
- The map lamp and room lamp will stay on continuously if the door is
opened with the ignition switch inthe ON position.
- The map lamp and room lamp will go out immediately if the ignition
switch is changed to the ON posi‐
tion or all doors are locked.
- To turn off the DOOR mode, press the DOOR button (2) once again
(not pressed).

4-95
4
Features of your vehicle