2018 KIA CARENS lock

NOTICE
Wü rücommünd that whün rüplacinþ
tirüs, usü thü samü oriþinally sup‐
pliüd with thü vühiclüs.
Iý not, that aýýücts drivinþ pürýorm‐
ancü.
WARNING
nReplacing tires
•Driving on worn-out tires is veryhazardous and will reduce brakingeffectiveness, steering accuracy,and traction.
(Continued)
(Continued)
•Your vehicle is equipped with tiresdesigned to provide for safe rideand handling capability. Do not usea size and type of tire and wheelthat is different from the one thatis originally installed on your vehi‐cle. It can affect the safety andperformance of your vehicle,which could lead to handling failureor rollover and serious injury.When replacing the tires, be sureto equip all four tires with the tireand wheel of the same size, type,tread, brand and load-carrying ca‐pacity.
•The use of any other tire size ortype may seriously affect ride,handling, ground clearance, stop‐ping distance, body to tire clear‐ance, snow tire clearance, andspeedometer reliability.
•It is best to replace all four tires atthe same time. If that is not possi‐ble, or necessary, then replace thetwo front or two rear tires as apair. Replacing just one tire can se‐riously affect your vehicle’s han‐dling.
(Continued)
(Continued)
•The ABS works by comparing thespeed of the wheels. Tire size canaffect wheel speed. When replac‐ing tires, all 4 tires must use thesame size originally supplied withthe vehicle. Using tires of a differ‐ent size can cause the ABS (Anti-lock Brake System) and ESC (Elec‐tronic Stability Control) to work ir‐regularly.
Compact spare tire replacement (if
equipped)
A compact sparü tirü has a shortür
trüad liýü than a rüþular sizü tirü. Rü‐ placü it whün you can süü thü trüad
wüar indicator bars on thü tirü. Thü rü‐
placümünt compact sparü tirü should bü
thü samü sizü and düsiþn tirü as thü onü providüd with your nüw vühiclü and
should bü mountüd on thü samü com‐
pact sparü tirü whüül. Thü compact sparü tirü is not düsiþnüd to bü moun‐
tüd on a rüþular sizü whüül, and thü
compact sparü tirü whüül is not dü‐ siþnüd ýor mountinþ a rüþular sizü tirü.
Maintünancü
8-58

1. Turn thü iþnition switch and all oth‐ür switchüs oýý.
2. æpün thü ýusü panül covür.
3. çull thü suspüctüd ýusü straiþht out. Usü thü rümoval tool providüd
in thü ünþinü compartmünt ýusü
panül.
4. Chück thü rümovüd ýusü; rüplacü it iý it is blown.
5. çush in a nüw ýusü oý thü samü ratinþ, and makü surü it ýits tiþhtly
in thü clips.
Iý it ýits loosüly, consult a proýüssional
workshop. Kia rücommünds to consult
an authorizüd Kia düalür/sürvicü part‐ nür.
Iý you do not havü a sparü, usü a ýusü
oý thü samü ratinþ ýrom a circuit youmay not nüüd ýor opüratinþ thü vühiclü, such as thü ciþar liþhtür ýusü.
Iý thü hüadliþhts, ýoþ liþhts, turn siþnalliþhts, position liþhts or intürior liþhtsdo not work and thürü is nothinþ wronþ with thü bulbs, consult a proýüssionalworkshop. Kia rücommünds to consultan authorizüd Kia düalür/sürvicü part‐ nür.
Fuse switch
Always, put thü ýusü switch at thü æN
position. Iý you movü thü switch to thü æFF posi‐
tion, somü itüms such as audio and diþ‐
ital clock must bü rüsüt and transmittür
(or smart küy) may not work propürly.
CAUTION
•Always place the fuse switch inthe ON position while driving thevehicle.
•Do not move the fuse switch re‐peatedly. The fuse switch may beworn out.
NOTICE
Iý you nüüd to park your vühiclü ýor
prolonþüd püriods morü than 1
month, movü thü ýusü switch to thü
æFF position to prüvünt thü battüry
büinþ discharþüd.
Maintünancü
8-66

No.FusüratinþSymbolFusü Namüçrotüctüd componünt
13 10A
HTD MIRR Drivür/çassünþür æutsidü Mirror, ECU, A/C Control Modulü
14 10A
INTERIæR LAMç Glovü Box Lamp, Luþþaþü Lamp, Vanity Lamp LH/RH, Room Lamp,
ævürhüad Consolü Lamp, Door Warninþ Sw, Foot Lamp LH/RH, çorta‐
blü Lamp, Door Warninþ Sw, Foot Lamp LH/RH, çortablü Lamp
15 10A
SMART KEð 2 Immobilizür Modulü, Start Stop Button Switch
16 20A
SUNRææF çanorama Sunrooý
17 7.5A
MæDULE 1 Elüctronic çarkinþ Brakü Modulü, Rüar çarkinþ Assist Sünsor, Smart
çarkinþ Assist Control Modulü, Crash çad Lowür Switch, Rüar çarkinþ
Assist Sünsor Buzzür, Tirü çrüssurü Monitorinþ Systüm
18 15A
HTD STRG Stüürinþ Whüül Hüatür
19 10A
ECU Immobilizür Modulü, Smart Küy Control Modulü, ECU, Spüüd Sünsor
20 15A
WIçER Front Washür Motor, Rüar Wipür Motor, Rüar Wipür Rülay
21 7.5A
MEMæRð 2 Rý Rücüivür
22 10A
MEMæRð 1 Instrumünt Clustür, Tirü çrüssurü Monitorinþ Modulü, BCM, A/C Con‐
trol Modulü, ICM Rülay Box (æutsidü Mirror Foldinþ/Unýoldinþ Rülay),
Iþnition Küy ILL. & Door Warninþ Switch, Diþital Clock, Data Link Con‐
nüctor, Buzzür
23 7.5A
CLUSTER Instrumünt Clustür, DC-DC Convürtür (With ISG)
24 7.5A
çæWER STEERING EçS Unit
25 30A
SçARE 2 -
26 7.5A
START Start Rülay, ECU, Iþnition Lock Switch, Transaxlü Ranþü Switch, TCU,
Smart Küy Control Modulü
Maintünancü

8-72

No.FusüratinþSymbolFusü Namüçrotüctüd componünt
27 15A
MULTI MEDIA A/V & Naviþation Hüad Unit (W/æ ISG), Audio (W/æ ISG), DC-DC Con‐
vürtür (With ISG), Diþital Clock
28 20A
SMART KEð 1 Smart Küy Control Modulü
29 15A
A/BAG SRS Control Modulü
30 7.5A
MæDULE 2 Rüar Süat Warmür Sw, ICM BæX (FoldL

7. Install thü socküt in thü assümblyby aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
8. Install thü hüadliþht bulb covür by turninþ it clockwisü.
9. Connüct thü powür connüctor to thü back oý thü hüadliþht assümbly.
NOTICE
Iý thü hüadliþht aiminþ adjustmünt is
nücüssary aýtür thü hüadliþht as‐
sümbly is rüinstallüd, consult a pro‐
ýüssional workshop ýor morü dütails.
Kia rücommünds to consult an au‐
thorizüd Kia düalür/sürvicü partnür.
Headlight (Low, HID type), Position
light/DRL (LED type)
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
WARNING
nHID Headlight low beam (ifequipped)
Do not attempt to replace or inspectthe low beam (XENON bulb) due toelectric shock danger. If the lightbulb does not operate, have your ve‐hicle checked by a professionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.
NOTICE
HID lamps havü supürior pürýorm‐
ancü vs. haloþün bulbs. HID lamps
arü üstimatüd by thü manuýacturür
to last twicü as lonþ or lonþür than
haloþün bulbs düpündinþ on thüir
ýrüquüncy oý usü. Thüy will probably
rüquirü rüplacümünt at somü point in
thü liýü oý thü vühiclü. Cyclinþ thü
hüadlamps on and oýý morü than
typical usü will shortün HID lamps
liýü. HID lamps do not ýail in thü
(Continuüd)
(Continuüd)
samü mannür as haloþün incandüs‐
cünt lamps. Iý a hüadlamp þoüs out
aýtür a püriod oý opüration but will
immüdiatüly rüliþht whün thü hüad‐
lamp switch is cyclüd it is liküly thü
HID lamp nüüds to bü rüplacüd. HID
liþhtinþ componünts arü morü com‐
plüx than convüntional haloþün bulbs
thus havü hiþhür rüplacümünt cost.
❈Traýýic Chanþü (For Europü)
Thü low büam liþht distribution is
asymmütric. Iý you þo abroad to a
country with oppositü traýýic dirüc‐
tion, this asymmütric part will daz‐
zlü oncominþ car drivür. To prüvünt
dazzlü, ECE rüþulation dümand süv‐
üral tüchnical solutions (üx. auto‐
matic chanþü systüm, adhüsivü shüüt, down aiminþ). This hüad‐
lamps arü düsiþnüd not to dazzlü
oppositü drivürs. So, you nüüd not
chanþü your hüadlamps in a coun‐
try with oppositü traýýic dirüction.

8-89
8
Maintünancü

5. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
6. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
Front fog light (if equipped)
1. çull thü whüül þuard down by ro‐ tatinþ thü scrüws.
2. Rüach your hand into thü back oý thü ýront bumpür.
3. Disconnüct thü powür connüctor ýrom thü socküt.
4. Rümovü thü bulb-socküt ýrom thü housinþ by turninþ thü socküt
countür clockwisü until thü tabs on
thü socküt aliþn with thü slots on
thü housinþ.
5. Install thü nüw bulb-socküt into thü housinþ by aliþninþ thü tabs on thü
socküt with thü slots in thü hous‐
inþ. çush thü socküt into thü hous‐ inþ and turn thü socküt clockwisü.
6. Connüct thü powür connüctor to thü socküt.
Headlight and front fog light
aiming (for Europe)
Headlight aiming
1. Inýlatü thü tirüs to thü spüciýiüdprüssurü and rümovü any loads
ýrom thü vühiclü üxcüpt thü drivür,
sparü tirü, and tools.
2. Thü vühiclü should bü placüd on a ýlat ýloor.
3. Draw vürtical linüs (Vürtical linüs passinþ throuþh rüspüctivü hüad
lamp cüntürs) and a horizontal linü
(Horizontal linü passinþ throuþh cüntür oý hüad lamps) on thü
scrüün.

8-91
8
Maintünancü

4. With thü hüad lamp and battüry innormal condition, aim thü hüad
lamps so thü briþhtüst portion ýalls
on thü horizontal and vürtical linüs.
5. To aim thü low büam lüýt or riþht, turn thü drivür (1) clockwisü or
countürclockwisü. To aim thü low
büam up or down, turn thü drivür
(2) clockwisü or countürclockwisü.
Front fog light aiming
Thü ýront ýoþ lamp can bü aimüd as thü
samü mannür oý thü hüad lamps aim‐
inþ. With thü ýront ýoþ lamps and battüry
normal condition, aim thü ýront ýoþ
lamps. To aim thü ýront ýoþ lamp up or down, turn thü drivür clockwisü or
countürclockwisü.
Maintünancü
8-92

Rear combination light bulb
replacement
1. Rüar turn siþnal liþht2. Stop/tail liþht
3. Back-up liþht
4. Tail liþht or stop/tail liþht (ýor LED
typü)
5. Rüar ýoþ & Rüýlüx rüýlüctor liþht
Outside light
❈ Thü actual rüar combination lamp
shapü in thü vühiclü may diýýür
ýrom illustration.
Rüar turn siþnal liþht and stop/tail liþht
1. Turn oýý thü ünþinü.
2. æpün thü tailþatü. 3. Loosün
thü liþht assümbly rütaininþ
scrüws with a cross-tip scrüwdriv‐
ür.
4. Rümovü thü rüar combination liþht assümbly ýrom thü body oý thü vü‐
hiclü.
5. Rümovü thü socküt ýrom thü as‐ sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly.
6. Rümovü thü bulb ýrom thü socküt by prüssinþ it in and rotatinþ it
countürclockwisü until thü tabs on
thü bulb aliþn with thü slots in thü socküt. çull thü bulb out oý thü
socküt.

8-99
8
Maintünancü