2018 INFINITI Q50 I touch

8. Information and settings
FULLY CUSTOMIZABLE DIGI-
TAL ENVIRONMENT
The system will automatically recognize the
user upon turning on the vehicle, after
Setting up the user information. There will
be a personalized welcome guidance and a
prompt to log-in.
This feature allows 3 drivers to use their own
registration, drive mode, driving position, air
conditioner and audio settings, and mem-
orizes these custom settings.
Log-in user can be changed from welcome
guidance screen or User List screen.
NOTE:
. Vehicle Apps settings and configura-
tions are not linked to specific Intelli-
gent Keys.
. A maximum of four Intelligent Keys can
be registered to store settings for three
profiled users and one guest. One user
setting information can be stored per
key.
. When the ignition switch is pushed to
the “OFF” position, the user settings at
that point will be memorized by the
Intelligent Key that is used.
USER REGISTRATION
The driving position, navigation, and air
conditioner, etc., settings can be memorize
for each user. The settings can be restored
when deactivating the system.
Up to three users can be registered.
1. When a system is started with an
Intelligent Key that had not been regis-
tered, a message asking if you wish to
register yourself as a user is displayed.
To register:
.If you are the first user to register,touch [Yes] on the user registration
screen
.
.If you are the second or the third userto register, touch [Select User] on the
user registration screen
.
2. The New User register screen. Enter the user information on the New User reg- ister screen is displayed.
3. After inputting user information, touch [End] to complete user registration.
INFO:
. Do not push the ignition switch to the
“OFF” position during user registration.
The registration may not complete.
. If [Later] is selected on the pop-up
message screen, the user will log in as a
guest. If the same Intelligent Key is used
again the next time the vehicle is used,
the same pop-up message will be dis-
played.
If [No] is selected, the user will log in as a
guest and the pop-up message will not
be displayed again with the same In-
telligent Key.
INFO:
. To change the registered user informa-
tion, press

EDITING USER INFORMATION
1. Touch the user icon of the lower right ofthe lower display to show user list
screen.
2. Display user list screen.
Name:
Display user name. Touch to change
log-in user.
User icon:
Display user select icon.
[Edit]:
Select to edit user settings.
[Add New]:
Add a new user. It can register a
maximum three persons. This key will
not be displayed when three users
have been already registered. 3. Touch [Edit] of the user you want edit.
INFO:
. User name and user icon of the guest
user cannot be edited.
. The User List can also be accessed for
editing using the following procedure.
1. Push

8. Information and settings
.Meter Settings
[Delete]Delete a user.
INFO:
. The number of characters for the user
name is limited.
. When a current user is deleted, the user
is changed to a guest user.
. When the ignition switch is pushed to the
“OFF” position, the current user settings
will be stored by the Intelligent Key that
is used.
Change the user picture
When you connect USB device with image
data, you can download image and setting
picture.
1. Display User Edit screen and touch
[Change Icon].
2. Connect USB device and touch [
].
3. Touch preferred picture file name.
4. Touch [Select] to setting user picture.
When display picture-preview screen, touch
[Update Only] to only update picture list
from USB device.
SETTING INFINITI INTUITION
FEATURE
Push

9 Navigation (if so equipped)
Safety information ........................................................... 9-3
Map data authentication ................................................ 9-3
Map operation ................................................................... 9-4Map types ..................................................................... 9-4
Road color ..................................................................... 9-6
Displaying current vehicle location ......................... 9-7
Moving map ................................................................... 9-7
Changing scale of map .............................................. 9-8
Change map .................................................................. 9-9
Setting split screen ................................................... 9-10
Map view settings .................................................... 9-10
Setting information on map ................................... 9-14
Traffic information on map .................................... 9-14
Setting destination ......................................................... 9-15 Changing region ........................................................ 9-15
Destination screen .................................................... 9-16
Finding address .......................................................... 9-19
Finding points of interest ...................................... 9-20
Setting home as destination .................................. 9-22
Setting intersection .................................................. 9-22
Finding nearby place ................................................ 9-23
Using Journey Planner ............................................. 9-23
Searching from history ............................................ 9-24
Setting freeway entrance/exit .............................. 9-24
Setting city center ..................................................... 9-25 Searching from Stored Locations ...................... 9-25
Setting by phone number ..................................... 9-26
Setting from stored routes ................................... 9-26
Setting by Infiniti InTouch
TMServices .............. 9-26
Setting point on map ............................................. 9-28
Procedures after setting route ............................ 9-28
Route guidance .............................................................. 9-30
About route guidance ........................................... 9-30
Guidance screen settings ...................................... 9-35
Canceling Route ...................................................... 9-35
Route menu screen ................................................. 9-35
Editing route ............................................................. 9-36
Recalculating route ................................................. 9-38
Searching for detour route using
traffic information .................................................. 9-39
Setting detour route .............................................. 9-40
Route guidance settings ...................................... 9-40
Viewing traffic information ......................................... 9-45
Viewing available traffic information ....................... 9-46
Viewing traffic information list ........................... 9-47
Display urgent traffic information ..................... 9-47
Traffic Information Settings ................................ 9-47
Traffic information on map ................................. 9-48
Storing a location/route .............................................. 9-49 Storing location ....................................................... 9-49

9. Navigation (if so equipped)
MAP OPERATION
MAP TYPES
Maps are displayed on the upper touch
screen display (upper display).
Two types of map views are available: 2D
map and Birdview™ (3D) map.
2D map
The 2D map displays the map in a two-
dimensional environment similar to a road
map.
Screen information:
Arrow:
Indicates the turning direction of the
next guide point. Distance to the guide
point is also indicated above the arrow.
This indicator will appear when a desti-
nation or waypoint is set and route
guidance is started.
Traffic indicator:
Displays the reception condition of
traffic information transmitted from
the traffic information provider. When the reception condition of traffic
information transmitted from the pro-
vider is not detected, the traffic indica-
tor will not be displayed.
Waypoint:
Displays the set locations between the
starting point and the destination. A
maximum of five waypoints can be set.
Guide point:
Indicates a guide point on the route.
Vehicle icon:
Indicates the current vehicle location
9-4

and the direction of travel.
Starting point:
Displays the vehicle location, with which
the route is set, as the starting point.
Speed limit icon:
Displays the speed limit of the current
driving road.
Battery status:
Indicates the battery status of the
connected cellular phone in four levels.
Reception level indication:
Indicates the approximate level of re-
ception of the connected cellular phone.
Infiniti InTouchTMServices antenna
icon
When the system connects to the Infiniti
InTouch
TMServices Data Center, an
antenna icon will appear on the screen.
“Infiniti InTouchTMServices fea-
tures” (page 8-11)
Clock
Display current time.
“Clock settings” (page 2-21)
Remaining time and distance to
the destination:
Indicates the approximate remaining time and distance to the destination or
waypoint. This indicator will appear
when a destination or waypoint is set
and route guidance is started.
IVR soft button (if so equipped):
Touch the icon to connect to the Infiniti
InTouch
TMServices Interactive Voice
Menu.
“Connecting to Interactive Voice
Menu” (page 8-16)
Upper display icon:
Touch the icon to display the shortcut
menu.
“Upper touch screen display (upper
display)” (page 2-11)
Scale indicator:
Indicates the scale of the map.
Touch the icon to display the scale bar.
The map scale can be adjusted using the
scale bar.
“Changing scale of map”
(page 9-8)
/Direction indicator:
Indicates the directional setting of the
map. Touch the icon to change the
setting.
: North always pointing up.
: Direction of the vehicle always
pointing up.
Avoid area (green):
Displays the areas to avoid that are
stored in the Address Book. During the
route search, the route guidance is
performed by searching for a route that
avoids those areas.
Street name:
Displays the name of the street that the
vehicle is currently driving on.
Suggested route:
Appears in bold blue during route gui-
dance.
Stored location (yellow):
Displays the locations that are stored in
the Address Book. The icons can be
changed according to your preferences.
Destination:
Indicates the destination location of the
route guidance.
Upon reaching the destination, the ad-
dress will be displayed on the map
screen.
9. Navigation (if so equipped)
9-5

DISPLAYING CURRENT VEHICLE
LOCATION
Operating with INFINITI controller
The basic map screen displays the current
location (the position where the vehicle mark
is located). Push

9. Navigation (if so equipped)
Birdview™ (3D) map
Touch panel operation:
Touch
Touch the screen. The cross pointer is
displayed, and the position touched is set
as the center of the screen.
Touch [
]or[] to change the direction of
the map.
Long touch
Touch the direction to move to, or touch [
]
or [], the map continues to move while the
screen is touched.
Drag
Drag the map to scroll to the preferred
direction.
Flick
Flick the touch panel to scroll the map screen
quickly.
Use INFINITI controller:
1. Slide the slide switch to move continu- ously across the map in a direction.
2. While moving on the map, the cross pointer appears.
INFO:
While driving, one-touch continuous scrol-
ling is disabled. Touch the screen again to
scroll further.
If the map screen is set to display the
building footprint graphics, the map cannot
be scrolled while driving.
Map scrolling operations are limited and not
fully available while driving.
CHANGING SCALE OF MAP
There are several methods for changing the
map scale.
Touch panel operation
1. Touch.
The scale bar is displayed.
2. Touch [Zoom In] or [Zoom Out] to change the scale.
Pinch-in
To view a wider area, pinch-in the map
screen.
Pinch-out
To view the map in detail, pinch-out the map
screen.
9-8