2018 FIAT 500 CD player

KNOWING YOUR CAR
62
ButtonGeneral functionsMode
g
On Short press
Off Short press
Volume Turn knob clockwise/anticlockwise
zII Volume activation/deactivation (Mute/Pause) Short press
N Exit the selection/return to previous screen Short press
Scroll list or tune to a radio station
BROWSE ENTER or select next/previous tracks Turn knob clockwise/anticlockwise
Confirm option shown on display Short press
INFO Select viewing mode (Radio, Media Player) Short press
AUDIO Access audio settings and adjustment functions Short press
MENU Access Settings menu Short press
MEDIA Source selection: USB or AUX (where provided) Short press
RADIO Access Radio mode Short press
1-2-3-4-5-6 Store current radio station Long press
Recall stored radio station Short press
A-B-C Select radio preset group or
Short press
select desired letter in each list
Search for previous radio station or
” select USB previous track Short press Scan lower frequencies until released rewind USB track Long press
Search for next radio station or
» select USB next track Short press
Scan higher frequencies until released
fast forward USB track Long press
Shuffle USB tracks on USB Short press
Repeat USB track Short press
Front panel control summary table

KNOWING YOUR CAR
80
❒ The USB device must use a FAT-32
file system.
❒ The USB device must not be locked
and it must be possible to save files
on it.
NOTE It is advisable to use a memory
stick, while the use of mass storage
devices, such as mobile phones or
multimedia players, is not
recommended.
To prepare a USB device, proceed as
follows:
❒ Select “Navigation updates” in the
“Settings” menu.
You are asked whether you wish to
prepare a USB device for downloading
updates.
❒ Select "Yes".
❒ Insert the USB device.
NOTE If the system continues to ask
you to insert the USB device, check
that the device meets the requirements
indicated previously, then retry.
The system starts to prepare the USB
device.
When the USB device is ready, the
following message is displayed.Remove the USB device and connect it
to the computer.
The new map can now be downloaded
to the USB device.
TomTom HOME installation
To install TomTom HOME and create a
MyTomTom account, proceed as
follows:
❒ Download and install the TomTom
HOME application on the computer.
On the computer, access
tomtom.com/getstarted. Select
“Download TomTom HOME”, then
follow the instructions provided.
❒ Connect the USB device prepared
using the computer. TomTom
HOME is started automatically.
❒ Select “Log in” in the top right
corner of TomTom HOME.
❒ Select “Create account” and enter
the required details to create a
MyTomTom account. A MyTomTom
account is required to receive map
updates.After the account is created, you are
asked whether you wish to connect the
Uconnect™ system to your account.
The USB device prepared represents
your Uconnect™ system.
❒ Select “Link device”, then select
“Close”.
A map can now be downloaded to the
USB device.
Downloading a map
Connect the USB device to the
computer.
If a map update is available for the
system, this update is included in the
list of updates available.
NOTE If the most recent map is already
installed on the system, the update is
not proposed.
Select the map that you wish to
download, then select
“Update and install”.
The map is downloaded and copied to
your USB device.
Select “Done” when the process is
complete.

KNOWING YOUR CAR
90
❒ search forUconnect™on the
Bluetooth®audio device (during
the pairing stage a screen is
displayed showing the progress of
the operation);
❒ when requested by the audio
device, enter the PIN code shown
on the system display or confirm on
the device the PIN displayed;
❒ when the pairing procedure has
completed successfully, the user
will be asked “Make this your
favourite?”. If “Yes” is selected in
response to the question, the
Bluetooth®device will be
registered as the favourite (the
device will have a higher priority
than the others paired
subsequently). If "No" is selected,
the priority is determined according
to the order of connection. The last
device connected will have the
highest priority;
❒ an audio device can also be paired
by pressing the “Phone” graphic
button on the display and by
selecting “Settings” or, from the
“Settings” menu, selecting
“Phone/Bluetooth®”.IMPORTANT If the Bluetooth®
connection between mobile phone and
system is lost, consult the mobile
phone handbook.
NOTE: The Radio may change the
track being played by modifying the
name-device in the Bluetooth settings
of the phone (where provided), if the
device is connected via USB after the
Bluetooth connection.
USB SOURCE
To activate the USB mode, insert the
corresponding device into the USB
port on the central console.
If a USB device is inserted with
the system on, this starts playing the
tracks present on the device.
AUX SOURCE
(where provided)
To activate AUX mode, insert an
appropriate device in the AUX socket
on the vehicle.
Inserting a device with AUX output
socket, the system starts playing the
connected AUX source if it not already
playing. Adjust the volume using the
button/knob
gon the front panel or
using the volume adjustment control
on the connected device.
The “AUX Volume Offset”
(where provided) function can be
selected in Radio mode only when the
AUX source is active.
IMPORTANTThe functions of the
device connected with the AUX socket
are directly managed by the device
itself: it is not possible to change
track/folder/playlist or control playing
start/end/pause with the controls on
the front panel or on the steering
wheel.
Do not leave the cable of your portable
player connected to the AUX socket
after disconnection, to avoid possible
hiss from the speakers.