2018 FIAT 500 trip computer

25
It is possible to move along the setup
menu list by pressing the
+ or – buttons once. Operating
modes are different according to the
characteristics of the option selected.
The menu comprises the following
functions:
❒ DIMMER
❒ SPEED BUZZER
❒ TRIP B ACTIVATION/DATA
❒ SET TIME
❒ SET DATE
❒ AUTOCLOSE
❒ UNITS
❒ LANGUAGE
❒ BUZZER VOLUME
❒ BUTTON VOLUME
❒ SEAT BELT BUZZER
❒ SERVICE
❒ AIRBAG/PASSENGER BAG
❒ DAY LIGHTS
❒ ITPMS RESET
❒ RADIO REPETITION
(for markets/versions, where
provided)
❒ SEE PHONE (for markets/versions,
where provided)
❒ SEE NAVIGATION
(for markets/versions, where
provided)
❒ EXIT MENUTRIP COMPUTER
The Trip computer is used to display
information on car operation when the
key is turned to MAR.
This function includes two separate
trips, namely “Trip A”
and “Trip B”.
Both functions can be reset (reset
means start of a new journey).
“Trip A” may be used to display values
relating to: range (for versions/markets,
where provided), travel distance,
average fuel consumption (for
versions/markets, where provided),
current consumption (for
versions/markets, where provided),
average speed, travel time.
“Best average consumption": in ECO
mode, displays a screen summarising
the best average consumption (where
provided). The icon indicates the
best performance. This information can
be reset by resetting Trip A.
“Trip B” may be used to display the
following values to be displayed: range,
travel distance B, average fuel
consumption B
(for versions/markets, where provided),
average speed B,
travel time B.
SET TIME (SETTING THE
CLOCK)
The time is set through the
multifunction display.
❒ Press the MENU button; the
following two submenus are shown
on the display: “Time” and
“Format”.
❒ Press the + or – button to move
between the two submenus.
❒ Select the required option and
press the MENU button.
❒ When you select the “Clock”
submenu, pressing the MENU
button briefly makes the “hours”
flash on the display.
❒ Press the button + or – to carry out
the adjustment.
❒ Having set the time, briefly press
the MENU button: the
“minutes” will flash on the display.
Set the minutes
using the same procedure as for
the hours.
❒ Having set the time, press and hold
down the MENU button.
–
–
–
–
–

75
Press the button to access the list of
text messages received by the mobile
phone (the list displays a
maximum of 60 messages received).
NOTE On some mobile phones, to
make the text message voice reading
function available, the text message
notification option on the phone must
be enabled. This option is usually
available on the phone, in the
Bluetooth® connections menu for a
device paired as Uconnect™. After
enabling this function on the mobile
phone, it must be disconnected and
reconnected with the Uconnect™
system in order to make it effective.
SMS message options
Default text messages are stored in the
system memory and can be sent to
answer a received message or as a
new message:
❒ Yes.
❒ No.
❒ Okay.
❒ I can't talk right now.
❒ Call me.
❒ I'll call you later.
❒ I'm on my way.
❒ Thanks.❒ I will be late.
❒ Stuck in traffic.
❒ Start without me.
❒ Where are you?
❒ Are you there yet?
❒ I need directions.
❒ I'm lost.
❒ See you later.
❒ I will be 5 (or 10, 15, 20, 25, 30, 45,
60)* minutes late.
❒ See you in 5 (or 10, 15, 20, 25, 30,
45, 60)* minutes.
* Only use the numbers listed,
otherwise the system will not take the
message.
NOTE See the dedicated section for
details on how to send a text message
using the voice commands.
APPS Mode
Introduction
Press the APPS button on the front
panel to display the following operating
settings:
❒ Outside Temp
❒ Clock
❒ Compass❒ Trip
❒ Uconnect™ LIVE
Uconnect™ LIVE
Services
Press the APPS button to access a
radio menu which shows all the
application functions of the system,
such as:
Trip computer, Settings, Compass (for
versions/markets, where provided),
Uconnect™ LIVE applications.
If there is a Uconnect™ icon, the
system is set up for the connected
services and allows the applications to
be used directly from the radio, for a
more efficient and advanced use of the
vehicle. The application functions are
present according to the vehicle
configuration and to the market.
To use the Uconnect™ LIVE services
it is necessary to:
❒ Download the Uconnect™ LIVE
App from the “App Store” or
“Google play” on your compatible
smartphone, making sure that the
data connection is enabled.
❒ Register on Uconnect™ LIVE App,
www.DriveUconnect.eu or in the
site www.fiat.it.

77
Connected services that can be
accessed on the vehicle
The Uconnect™ LIVE services
available in the radio menu can change
according to the market.
The eco:Drive™ and my:Car
applications were developed to
improve the customer’s driving
experience, therefore they are available
in all markets, where the Uconnect™
LIVE services can be accessed.
For further information visit the
www.DriveUconnect.eu website.
If the navigation system is installed in
the radio, accessing the Uconnect™
LIVE services enables use of the
TomTom LIVE services. Further
information about the LIVE functions is
available in the dedicated chapter.
eco:Drive™
The eco:Drive™ application allows you
to display your driving behaviour in real
time, in order to help you reach a more
efficient driving style as far as
consumption and emissions are
concerned.In addition, the data can be saved on a
USB flash drive, and the data analysis
can be made on your personal
computer thanks to the eco:Drive™
desktop application, available on
www.fiat.it or www.DriveUconnect.eu.
Driving style is evaluated by means of
four indices which monitor the
following parameters:
❒ Acceleration
❒ Deceleration
❒ Shifting
❒ Speed
eco:Drive™ display
Press the eco:Drive™ button to
interact with the function.
A screen will be displayed on the radio,
showing the 4 indices described
above. These indices are grey until the
system has enough data to evaluate
the driving style.
Once sufficient data are available, the
indices will have 5 colours depending
on the evaluation: dark green (very
good), light green, yellow, orange and
red (very bad).“Current trip index” refers to the entire
value calculated in real time based on
the average of the described indices.
It represents eco-friendliness of the
driving style: from 0 (low) to 100 (high).
In the event of extended inactivity the
display will show the average of the
indices up to that moment (”Average
index”) then the indices will be
coloured again in real time as soon as
the vehicle is restarted.
To check the data average of previous
trip (a “trip” is a cycle starting from
when the ignition key is turned on until
it is turned off), select the “Previous
Trip” button (fig. 4).
The details of the previous trip can also
be displayed by pressing the “Details”
button, in which duration (time and
mileage) and average speed will be
shown.

215
KNOWING YOUR CAR
Dashboard ......................................................................7
Instrument panel ..............................................................9
– Versions with multifunction display.................................9
– Versions with colour display.........................................10
– Warning lights and messages.................................11-23
Display panel..................................................................24
– Multifunctional display panel.........................................24
– Colour display panel....................................................24
– Setup menu.................................................................24
– Trip computer............................................................ 25
– Set time.......................................................................25
– Deactivating front passenger airbag and side
bag..............................................................................26
– Service (Scheduled Maintenance) ................................26
– Headlight adjustment...................................................27
– Reset tyres..................................................................27
Keys.............................................................................. 27
– Code card................................................................. 27
– Mechanical key ...........................................................27
– Key with remote control ..............................................27
The Fiat Code System....................................................28
Start-up device ..............................................................28
– Steering lock ..............................................................29
Seats ............................................................................29
– Front seats .................................................................29Head restraints ..............................................................30
– Rear head restraints (removal)..................................... 31
Steering wheel ...............................................................31
Rear-view mirrors ..........................................................31
– Interior mirror ..............................................................31
– Interior electrochromic mirror.......................................32
– Interior mirrors.............................................................32
Manual climate control system........................................33
– Air recirculation ..........................................................33
Automatic climate control system ..................................34
– Automatic operation....................................................34
– Air recirculation ..........................................................34
External lights ................................................................35
– Daylight lights..............................................................35
– Dipped headlights/side lights.......................................35
– Main beam headlights .................................................35
– Parking lights.............................................................. 35
– Direction indicators......................................................35
– Lane change function..................................................35
– Follow Me Home function............................................35
– Auto function (Dusk sensor)........................................ 36
Window cleaning ...........................................................37
– Windscreen wipers......................................................37
– Rear window wiper .....................................................38
– Rain sensor................................................................ 38
Automatic wiping........................................................... 39
CONTENTS