2018 BMW M4 Owners Manual

Change
speed
limit
Press the rocker switch repeatedly upwards ordownwards until the desired speed limit is set.
'yEvery time the rocker switch is pressed to
the resistance point, the speed limit is inj
creased or decreased by 1 km/h, 1 mph.'yEach time the rocker switch is pressed bej
yond the resistance point, the speed limit is increased or decreased to the next multij
ple of 10 km/h on the speedometer display.
If you set a speed limit while driving which is
below the current speed, the vehicle coasts down to the set speed limit.
Exceeding
the
speed
limit You can intentionally exceed the speed limit.There is no acoustic warning in such a case.
To exceed the set speed limit intentionally, fully depress the accelerator pedal.
The limit automatically becomes active again
as soon as the current speed falls below the
set speed limit.
Warning
when
the
speed
limit
is exceeded
Visual
warning The indicator lamp in the instrument
cluster flashes if the set speed limit is exceeded for as long as you exceed the
set speed limit.
Acoustic
warning'yIf you unintentionally exceed the set speed limit, you will hear an acoustic warning afj
ter approximately 5 seconds.'yIf the speed limit is reduced to below the driven speed during the journey, the warnjing sounds after approximately 30 secj
onds.'yIf you intentionally exceed the speed limit by fully pressing the accelerator pedal, nowarning is given.
Displays
in
the
instrument
cluster
Marking
of
the
speed
limit Display in the speedometer:
'yMarker illuminates green:
the system is active.'yMarker does not illuminate:
the system is inactive.
Indicator
lamp
'yIf the indicator lamp is illuminated:
the system is switched on.'yIf the indicator lamp is flashing: set speed limit is exceeded.
Status
display
Display of the set speed limit.
Dynamic
brake
lights PrincipleThe brake lights flash to warn road users bejhind your vehicle that you are performing an
emergency braking manoeuvre. This can rej duce the risk of a rear-end collision.
Seite 145SafetyControls145
Online Edition for Part no. 01402981699 - VI/17

General'yNormal braking: brake lights illuminate.'yHeavy braking: brake lights flash.
Shortly before the vehicle comes to a standj
still, the hazard warning lights are activated.
To deactivate the hazard warning lights:
'yAccelerate.'yPress the hazard warning lights button.
Active
Protection
General
The Active Protection safety package consists
of systems independent of each other:
'yAttentiveness assistant.'yPreCrash.'yPostCrash.
Attentiveness
assistant
Principle The system can detect decreasing attentivej
ness or tiring of the driver on long monotonous
journeys, for example on motorways. In this sitj
uation, it is recommended that you take a
break.
Safety
note WARNING
The system does not release you from
your personal responsibility to assess your physical condition. Increasing inattention or faj
tigue might not be detected, or may not be dej
tected in good time. There is a danger of accij dents. Make sure that the driver is rested and
alert. Adapt your driving style to the traffic conj
ditions.'

'yIn active driving situations, for example frej
quent lane changes.'yIn poor road conditions.'yIn strong crosswinds.
The system is reset approximately 45 minutes
after the vehicle is stopped, for example when
taking a break during a long motorway journey.
PreCrash
Principle The system can detect critical driving situajtions from 30 km/h/20 mph onwards, which
could cause an accident. In these situations, automatically preventative, protective measj
ures are taken to minimise the risk of accident.
Critical driving situations are, for example:
'yFull braking.'ySevere understeering.'ySevere oversteering.
When collision warning or front-end collisionwarning with light braking function is fitted,within the limits of the system, threatened colj
lisions into vehicles in front or stationary vehij
cles are detected.
Safety
note WARNING
The system does not release you from
your personal responsibility. Critical situations cannot be detected reliably or in good timedue to limitations of the system. There is a
danger of accidents. Adapt your driving style to the traffic conditions. Observe the traffic sitjuation and intervene actively if the situation
warrants it.'

At
a
standstill
After the vehicle has come to a halt, the brake is released automatically.Seite 148ControlsSafety148
Online Edition for Part no. 01402981699 - VI/17

Driving
Stability
Control
SystemsVehicle
equipmentThis chapter describes all standard, national
and special equipment available for the model
series. Therefore equipment which is not inj stalled in your vehicle, for example on account
of the selected optional equipment or the
country specification, may also be described
here. This also applies to safety-relevant funcj
tions and systems. Comply with the relevant
laws and regulations when using the correj
sponding functions and systems.
Anti-lock
Brake
System,
ABS
ABS prevents the wheels from locking when the brakes are applied.
Steering control is retained even in the event
of full braking, thereby enhancing active road
safety.
ABS is ready to operate each time the engine is started.
Brake
assist When the brake is pressed quickly, this system
automatically applies maximum braking power assistance. With full braking, this keeps thebraking distance as short as possible. It alsomakes full use of the advantages offered by
the Anti-lock Brake System ABS.
The pressure on the brake should be mainj tained for the duration of the full-braking procj
ess.M
Drive
PrincipleIndividual settings can be made in two presetconfigurations for the vehicle.
When starting the engine, as standard an effij cient vehicle status is active. M Drive is deactijvated.
General
Configurations
The configurations are set as follows:'y"M Drive 1": relaxed, comfortable driving.'y"M Drive 2": sportive, dynamic driving.
Setting
options
SymbolMeaning "DSC"Dynamic Stability Conj trol DSC, see page 150,
and M Dynamic Mode
MDM. "Engine"Programs of the M Enj
gine Dynamics Control,
see page 100. "Chassis"Programme of the Adapj
tive M suspension, see
page 153. "Steering"Programs of the Servoj
tronic, see page 154. "Transmission"Drivelogic, see page 98:
switching modes and
Drivelogic drive proj
grams. "Head-up
displ."Views of the Head-Up
Displays, see page 116.Seite 149Driving
Stability
Control
SystemsControls149
Online Edition for Part no. 01402981699 - VI/17

Configuring
M
DriveThe preset configurations can be individuallyset.
On the Control Display:1."My Vehicle"2."M Drive 1" or "M Drive 2"3.Selected desired adjustment option.4.Select the desired channel.
The individual settings are saved for the curj
rently used profile.
With M Drive activated a change is made imj mediately on the Control Display setting.
Activating/deactivating
M
Drive Activating Press the relevant button on the steering
wheel.
'yActivate M Drive 1.'yActivate M Drive 2.
If in M Drive, DSC OFF or MDM is set, a mesj
sage appears in the instrument cluster. This message is operated by pressing the button
again.
Deactivating Press the relevant button on the steering
wheel again.
Indicator
lamps
'yIndicator lamp illuminates: correj
sponding M Drive is activated.'yIndicator lamp flashes: M Drive
could not be activated. Anti-blockj
ing system ABS or Dynamic Stabilj
ity Control DSC control drive stabilj
ity directly.
Reactivate M Drive if the indicator stops flashing.M
Drive
setting
using
buttons
With activated M Drive individual settings outj side of the M Drive can also be changed, for
example, using buttons in the centre console.
That deactivates the M Drive.
To reactivate all the settings made on the Conj trol Display for M Drive, briefly press one of the
following buttons:'y'y
To accept the change settings in M Drive, press the corresponding button for a long time.
Reset
M
Drive Individual settings can be reset to default valj
ues.
1."My Vehicle"2."M Drive 1" or "M Drive 2"3."Reset M1" or "Reset M2"4."OK"
To interrupt resetting: "Cancel"
Dynamic
Stability
Control
DSC
PrincipleThe system reduces engine output and appliesthe brakes on individual wheels, helping, withinthe limits imposed by the laws of physics, to
keep the vehicle safely on course.
General
DSC detects the following unstable driving
conditions, for example:
'yLoss of traction at the rear which can lead to oversteer.'yLoss of grip of the front wheels which can
lead to understeer.Seite 150ControlsDriving
Stability
Control
Systems150
Online Edition for Part no. 01402981699 - VI/17

Safety
notesWARNING
The system does not release you from
your personal responsibility to assess the trafj
fic situation correctly. Due to system limitaj
tions, it cannot respond independently in an
appropriate manner in all traffic conditions.
There is a danger of accidents. Adapt your driving style to the traffic conditions. Observe
the traffic situation and intervene actively if the
situation warrants it.'

Safety
noteWARNING
With activated M Dynamic Mode stabilisj
ing engagements are only carried out to a rej duced degree. There is a danger of accident ordamage to property. Adapt to the traffic condijtions. Observe the traffic situation and interjvene actively if the situation warrants it. In theevent of a warning, do not move the steering
wheel with unnecessary force.'