2018 AUDI TT ROADSTER brake

Cl 00 .-< N r-­N .-< 0 r-­Vl 00
Floor mats on the driver side
Always use floor mats that can be securely at­tached to the floor mat fasteners and do not in­
terfere with the free movement of the pedals .
... Make sure tha t t he floor mats are properly se­
cured and cannot
move and interfere with the
pedals
q ,& .
Use only floor mats th at leave the pedal area un­
obstructed and that are firmly secured so that
they cannot slip out of position . You can obtain
suitable floor mats from your authorized Audi Dealer .
Floor mat fasteners are installed in your Audi.
Floor mats used in your vehicle must be attached
to these fasteners. Properly securing the floor mats will prevent them from sliding into posi­
tions that could interfere with the pedals or im ­
pair safe operation of your vehicle in other ways .
A WARNING
Pedals that cannot move freely can result in a
loss of vehicle control and increase the risk of
serious personal injury.
- Always make sure that floor mats are prop­
erly secured.
- Never place or install floor mats or other
floor coverings in the vehicle that cannot be
properly secured in place to prevent them
from slipping and interfering with the ped­
als or the ability to control the vehicle.
- Never place or install floor mats or other
floor coverings on top of already installed
floor mats. Additional floor mats and other coverings will reduce the size of the pedal
area and interfere with the pedals.
- Always properly reinstall and secure floor
mats that have been taken out for cleaning.
- Always make sure that objects cannot fall
into the driver footwell while the vehicle is
moving. Objects can become trapped under
the brake pedal and accelerator pedal caus­ ing a loss of vehicle control.
Safe driving
Stowing luggage
Loading the luggage compartment
All luggage and other objects must be properly
stowed and secured in the luggage compart­
ment.
Loose items in the luggage compartment can
shift suddenly, changing vehicle handling charac ­
teristics . Loose items can also increase the risk of
serious personal injury in a sudden vehicle ma­
neuver or in a collision.
... Distribute the load evenly in the luggage com­
partment .
... Always place and properly secure heavy items in
the luggage compartment as far forward as
possible .
... Secure luggage using the tie-downs provided
qpage 184.
A WARNING ~ -
Improperly stored luggage or other items can
fly through the vehicle causing serious per­
sonal injury in the event of hard braking or an
accident. To help reduce the risk of serious
personal injury:
- Always put objects, for example, luggage or
other heavy items in the luggage compart ­
ment.
- Always secure objects in the luggage com­
partment using the tie-down eyelets and
suitable straps .
A WARNING
-
Heavy loads will influence the way your vehi­
cle handles. To help reduce the risk of a loss
of control leading to serious personal injury:
- Always keep in mind when transporting
heavy objects, that a change in the center of
gravity can also cause changes in vehicle
handling:
- Always distribute the load as evenly as
possible.
- Place heavy objects as far forward in the
luggage compartment as possible.
- Never exceed the Gross Axle Weight Rating or the Gross Vehicle Weight Rating specified
""
183

Cl co .... N ,....
N .... 0 ,....
Vl co
Emissions control
systems
Catal ytic conve rt er
The vehicle may on ly be driven with unleaded
gasoline, otherwise the catalyt ic converter will be
destroyed.
Never drive until the tank is completely empty.
The irregular supply of f uel that results from that
can cause engine m isfires. Uncombusted fuel will
enter the exhaust system, wh ich can cause over­
heat ing and damage to the catalyt ic converter .
A WARNING
The temperature of the exhaust system is
high, both when d riving and after stopping
the engine.
-
- Never touch the exhaust tail pipes once they
have become ho t. This could result in bu rns.
- Do not park your vehicle ove r flammable
materials such as g rass or leaves because
the high temperat ure of the em iss ions con­
trol system co uld s tart a fire.
- Do not apply underbody p rotectant in the
exha ust system area, because this inc reases
the risk of fi re.
On Board Diagnostic
System (OBD)
The On -Board Diagnostic System monitors the
engine and transmission components that influ­
ence emissions.
F ig . 177 Footwell on left side of the vehicle : connect ion
port for the On-Board Diagnostic System (OBD)
Chec king and Filling
On -Board Diagnostic System
Engine da ta can be read out at the On-Board Di­
agnost ic System connection port using a spec ia l
testing
dev ice~ fig. 177 .
Indicator light
If thP ¢'4 ind icator light blinks or turns on, there
is a ma lf u nction that is caus ing poo r emissions
quality and that cou ld damage the catalytic con­
verter .
Drive slowly to an a uthorized Aud i dea ler or au­
t h orized Audi Serv ice Facili ty to have t he mal­
f unct ion corrected.
A WARNING ..
Incorrect use of the connection port for the
On-Board D iagnostic System can cause ma l­
f u nctions, which can then result in accidents
and serious injuries.
- Only allow an authorized Audi dea ler or au­
thor ized Audi Service Fac ility to read out the
engine data.
Engine compartment
Working in the engine compartment
Special care is required if you are working in the
engine compartment
-
F o r work in the engine compa rtment such as
checking and fill ing fl uids , there i s a risk of in­
jury , scalding, accident s, and b urn s. For thi s
re ason , follow all the warnings and general
safety pre cautions prov ided in the following
in ­
formati on. The engine compartm ent i s a dan­
gerou s area .
~ .&..
A WARNING
-----Turn the engine off.
- Sw itch the igni tio n off.
- Set the parking brake.
- P lace the se lector lever in the P position.
-Let the eng ine cool down.
-Never open the hood when there is steam or
coolant escaping from the engine compart­
ment, because there is a risk that you could
233

Check ing and F illing
be burned. Wait until no steam or coolant is
escaping.
- Keep children away from the engine com ­
partment.
- Never spill fluids on a hot engine . These flu ­
ids (such as the freeze protection contained
in the coolant) can catch fire.
- Avoid short circuits in the e lectrica l system,
especially to the battery.
- When working in the engine compartment,
remember that the radiator fan can switch
on even if the ign ition is switched off, which
increases the risk of personal in jury.
- Never open the cap on the coolant expan­
sion tank when the eng ine is warm. The
cooling system is under pressure.
- To protect your face, hands, and arms from hot steam or coolant, cover the cap with a
large cloth when opening.
- Do not remove the engine cover under any circumstances. This increases the risk of
burns .
- If tests need to be performed w ith the en­
gine ru nning, there is additional danger due
to moving components (such as the ribbed
belt, a lter nator and radiator fa n) and from
the high-voltage ign it io n system.
- Do not press the accelerator pedal inadver­
tent ly if a gear is selected when the veh icle
is sta tionary and the eng ine is ru nning. Oth­
erwise, the veh icle w ill start to move imme ­
diately and t his co uld r esult in an a ccid en t.
- Pay attention to the fo llow ing warnings list­
ed whe n wo rk on the fuel system or on the
electri cal eq uipment is requ ired.
- Do not smoke.
- Never work near open flames.
- Always have a working fire extinguisher
nearby.
- All work on the battery or e lectrica l system
in yo ur vehicle can res ult in injuries, chemi­
ca l burns, accidents or burns. Because of
t h is, all wor k must be performed
only by an
autho rized Aud i dealer or authorized Aud i
Service Facility .
- To reduce the risk of electric shock and in­
jury , never touch the following components
234
when t he engine is runni ng or is being start ­
ed:
- Ig nition cable
- Other compone nts in the electron ic high-
vo ltage ig nition system
- If you must check or perform work on the
eng ine wh ile it is ru nning:
- Set the pa rking brake and p lace the selec ­
tor lever in the P (par k) position fi rst .
- Alw ays proceed w ith ext reme cau tion so
t h at clothing, jewelry or long hair do not
become ca ught in the radiator fan, fan
belt or other moving components or do
not come into contact with hot compo ­
nents. Tie back long hair before begin ning
work and do not wear clothing that can
hang dow n into the eng ine .
- Lim it your exposure to exhaust and chemi­
cals to as short a time as possible
<=> &. .
A WARNING
Ca lifo rnia Proposition 65 Warning:
- Engine exhaust, some of its const ituents,
a nd certa in veh icle components conta in or
em it chem icals know n to the State of Cal i­
fornia to ca use cancer and b irth defects and
reproductive harm. In add ition, certain flu­
ids cont ained in vehicles a nd certai n prod ­
uc ts of component we ar con tain or em it
chemica ls known to the State o f Califo rnia
to cause cancer and birth defects or othe r
reproductive harm.
- Battery posts, terminals and related acces ­
sories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harms.
Was h ha nds after handling.
@ Note
When filling fluids, be sure not to mix the flu ­
i ds up. Otherwise severe mal functions and en­
g ine damage will occu r.
@ For the sake of the environment
You sho uld regularly check the gro und under
your vehicle in order to detect leaks quick ly. If
there are visible spots from oi l or othe r fluids,
ll-

Checking and Filling
Engine compartment overview
The most important check points .
Fig . 180 Typ ica l layou t of th e re servo ir and t he e ngin e o il f ille r open ing
(D Coolan t expans ion tank ( - t) ¢ page 240
@ Engin eoildipstick c:opage237
® Eng ine oi l filler opening (-er. ) co page 23 7
© Eng ine oil label* w ith VW standard
co page 236
® Brake fluid re servo ir ((0)) co page 241
@ Jump start po int( +) under a cover, ( -) body
ground
po int ¢ page 284
(J) Fuse hous ing ¢ page 2 80
@ Washer fluid rese rvoir (W) ¢ page 243
The eng ine oil dip stick @and the engine oi l filler
open ing ® ¢ fig. 180 may be loc ated in d ifferent
p laces within the engine compartment, depend ­
i n g on the engine vers ion .
A WARNING
Read and follow all WARN INGS before check­
ing anythi ng in the eng ine compa rtment
¢ page 233 .
236
Engine oil
· If the engine oil level is too low
If you need to add engin e oil , use an oil that is
listed on the s tick er.
The sticker is located at the
front of the eng ine
compartment ¢ page 236,
fig. 180.
If the re commended e ng ine o il is not available,
in an emergenc y you may add a maximum of 1
quart (1 liter) of AC EA C3 or API SN eng ine oi l
one time until the nex t oi l c hange .
F or more informa tion on the corre ct eng ine oil
for yo ur vehicle , contact an authorized Audi deal­
e r or authorized Aud i Serv ice Facility . Have the o il
c h anged by an autho rized Aud i dealer o r autho r-
i zed Service Facility.
.,.

Cl co .... N ,....
N .... 0 ,....
Vl co
continue driving. See an authorized A udi deal­
er or authorized Audi Service Facility for
assistance.
Brake fluid
F ig . 18 4 Engine co mpar tment : cove r on the brake flu id
r eservo ir
Observe the safety precautions c:> .&. in Working
in the engine compar tmen t on page 233.
Checking th e brake f luid l ev el
.,. Read the brake fluid level on the brake fluid
reservoir
i:> page 236, fig. 180. The bra ke fluid
l ev el must be between the MI N and MAX mark­
ings
c:> ,&. .
The brake flu id level is mon itored a utomat ica lly.
Changing the brake fluid
H ave the b rake flu id changed regularly by an a u­
thor ized Audi dealer or au thor ized A udi Se rvice
F acility .
A WARNING
-If the br ake f luid level is be low the M IN
marking, it can impair the braking effect
and dr iv ing safety, which increase the risk of
an acc ident. Do not cont inue driving . See an
authorized Audi dealer or authorized Audi
Service Facility for assistance .
- If the brake f luid is o ld, bubbles may form
in the brake system du ring heavy braking.
Th is would impair brak ing performance and
dr iv ing safety, which increases the risk of an
acc ident.
- To ensure the brake system functions cor­
rectly, only use brake fluids that comply
Chec king and Filling
wit h VW standard 501 14 or
FMVSS-116 DOT 4.
(D Note
- If the brake f lu id leve l is a bove the MA X
marking, bra ke f luid may leak o ut over the
edge of the reservo ir and result i n damage
to the vehicle.
- Do not get any b rake fl uid on the vehicle
paint, because it w ill corrode the paint .
Battery
General warnings about batteries
Bec au se of t he complex power sup ply, all wo rk
o n batter ies such as d iscon necti ng, replac ing,
etc., sho uld
onl y be performed by an au thorized
Audi dealer or authorized A udi Service Facility
c:> &_ .
The term "veh icle ba ttery" refe rs to the 12 Volt
battery in you r vehicle .
Detailed warnings for the vehicle battery :
~
Always wear eye protection .
&
Battery acid is highly corros ive . A lways
wear protective gloves a nd eye p rotection .
®
Fire, sparks , open flame and smok ing are
forbidden.
£
A hig hly explos ive m ix ture of gases ca n
for m when ch arging b att er ies.
®
Always keep children far away from bat-
tery electrolyte and the battery.
~
Always follow the instruct ions in the oper-
ating manual.
A WARNING ,.__ -All work on the battery or electrical system in
your vehicle can result in injuries, chem ica l
burns, acc idents or burns . Because of this, all
work must be pe rformed
only by an author­
iz ed Audi dealer or authorized A udi Service
F ac ility.
..,.
241

Wheel s
0 US DOT number (TIN) and
manufacture date
T he manufacture date is listed on
the tire sidewall (it may only ap­
pear on the inner side of the tire) :
DOT ... 2217 ...
means, for example, that the tire
was produced in the 22nd week of
the year 2017.
@ Audi Original Tires
Audi Original equipment tires
with the designation
"AO" have
been specially matched to your
Audi. When used correctly, these
tires meet the highest standards
for safety and handling. An au ­
thorized Audi dealer or author­
ized Audi Service Facility will be
able to provide you with more in­
formation.
® Mud and snow capability
"M/5" or "M+S" indicates the tire
has properties ma king it suitable
to drive in mud or snow.
& indi­
cates a winter t ire .
@) Compos ition of the tire cord
and materials
T he number of plies indicates the
number of rubberized fabric lay­
ers in the tire . In general: the
more layers, the more weight a
246
tire can carry. Tire manufacturers
must also specify the materials
used in the tire . These include
steel , nylon, po lyester and other
materials .
@ Maximum permitted load
This number indicates the max i­
mum load in kilograms and
pounds that the tire can carry.
@ Uniform tire quality grade
standards for treadwear,
tr action and temper ature
resistance
Treadwear, traction and tempera­
ture
ranges ~ page 260.
@ Running direction
@Maximum permitted
inflation pressure
This number indicates the maxi ­
mum pressure to which a tire can
be inflated under normal operat­
ing condit ions .
Glossary of tire and loading
terminology
Accessory weight
means the comb ined weight (in
excess of those standard items
which may be replaced) of auto­ matic transmission, power steer -
ing, power brakes, power
..

Wheel s
Load rating (code )
means the maximum load that a
tire is ra ted to carry for a given in­
flation pressure. You may not find
this info rmatio n on all tires be­
cause it is not required by law .
Maximum load rating
means the load rating for a tire at
the maximum permissible infla ­
tion pressure for that tire .
Maximum loaded vehicle
weight
means the sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight, and
(d) Production options weight
Ma ximum (permissible )
inflation pressure
means the maximum cold infla­
tion pressure to which a tire may be inflated . A lso called "maxi­
mum inflation pressure."
Normal occupant weight
means 150 lbs (68 kg) times the
number of occupants seated in
the vehicle up to the total seating
capacity of your vehicle.
248
Occupant distribution
means distribution of occupants
in a vehicle.
Outer diameter
means the overall diameter of an
inflated new tire.
Overall width
means the linear distance be­
tween the exteriors of the side­
walls of an inflated tire, inc lud ing
elevations due to labeling, deco­ rations, or protective bands or
ribs.
Ply
means a layer of rubber-coated
parallel cords.
Production options weight
means the combined weight of
those installed regular production options weighing over 5 lbs
(2 .3 kg) in excess of those stand­
ard items which they replace, not
previously considered in curb
weight or accessory weight, in­ cluding heavy duty brakes, ride
levelers, roof rack, heavy duty
battery, and special trim.
Radial ply ti re
means a pneumatic tire in which
the ply cords that extend to the
...

Wheels
Because the spare tire* is differ­
ent from the regular tires instal­ led on the vehicle (such as winter
tires or wide tires), only use the
spare tire* temporarily in case of
emergency and drive carefully
while it is in use. It should be re­ placed with a regular tire as soon
as possible.
Applies to: vehicles with all wheel
drive: all four wheels must be
equipped with tires that are the
same brand and have the same
construction and tread pattern so
that the drive system is not dam­
aged by different wheel speeds.
For this reason, in case of emer­
gency, only use a spare tire* that
is the same circumference as the
regular tires.
& WARNING ~ -
-Only use tire/rim combina­
tions and suitable wheel bolts
that have been approved by
Audi. Otherwise, damage to
the vehicle and an accident could result.
-For technical reasons, it is not
possible to use tires from oth­
er vehicles - in some cases,
you cannot even use tires from
the same vehicle model.
252
-Make sure that the tires you
select have enough clearance
to the vehicle. Replacement
tires should not be chosen simply based on the nominal
size, because tires with a dif­
ferent construction can differ greatly even if they are the
same size. If there is not
enough clearance, the tires or
the vehicle can be damaged and this can reduce driving
safety and increase the risk of
an accident.
-Only use tires that are more
than six years old when abso­
lutely necessary and drive
carefully when doing so.
-Do not use run-flat tires on
your vehicle. Using them when not permitted can lead to ve­
hicle damage or accidents.
- If you install wheel covers on
the vehicle, make sure they al­ low enough air circulation to
cool the brake system. If they
do not, this could increase the
risk of an accident.