2018 AUDI Q5 phone

u co ..... N r--­N ..... 0 <( 0 00
Function
Calling the last number dialed
Dialing a phone num ber
Correcti ng the p hone number that
was entered
Showing contact information
L isten ing to messages
Entering the PIN (SIM)
C orre ct in g the P IN entry
Correcting data input
C los ing the f ull -s cr een command
list
(D Tips
Voice recognition system
Say :
Redial
Enter number
> after being prompted, say the telephone num-
ber in group s of individual numbers,
fo r example. 888 555
1212 > Dial
Correction / Delete number
Directory
> say the desired contact when prompted,
for example John Smith
Call voicemail
Enter PIN
> when prompted, say the PIN in individual numbers
> Save
Correction / Delete PIN
No I meant ( XV)
Close
- P lease note th at comm an d s can o nly be giv­
en for the primary
phone *¢ page 1 74.
- Cont acts in the dire ctory can sele cted using
the fu ll name ("first name las t name" and
"last name, first name") as well as with only
the f irst or last nam e. This applies to cell
phones that t ransmit names separate d into
first and last names . -
For more informat io n on s uppo rted cell
phone s, vi sit www.audius a.c om/ blu etoo th
or cont act an a uthorized Audi dea ler or au­
thorized Audi Service Fac ility.
Audi connect (Infotainment)
A pp lies to: ve hicles with vo ice recognition syste m and Audi co nnect (Infotainment)
Req uirement: the requirements fo r A udi co nnect
(Info tainmen t) must be met
¢ page 187.
Function Say:
Accessing A udi con nect I nfota in-Audi connect > follow the system prompts
me nt serv ices
Audi co nnect Infotainment services
Weather / Online news / Fuel prices / Parking information /
T ravel infor mation / Twitter / Online traffic information / City
Events / Flight information
Search areas for Au di connec t Info -Near destination / Nearby / In a new city
ta inment serv ices
Correcting data inp ut
No I meant (XV)
(D Tips
Always read t he cha pte r¢ page 194, Audi
connect (Infotainm ent) g en eral information .
169

Voice recognition s ystem
Messages (Audi connect (Infotainment))
Applies to: vehicles with voice recognition system and Audi connect (Infotainment)
Requirement : a ce ll phone w it h an ac tive MAP
(Mess age Access P rofi le) must be connected to
t he MMI
¢page 180 .
Function Say:
T ex t ed iti ng commands Read out
I Addi/ Delete / Re cord everything ag ain / Replac e
w ith (XV ) / Add recipient / Send
Reading out a new message Read out new text me ssage
I Read out ne w e-mail
Reading a message Read out text me ssage / Read out e-m ail
Replying to the open text message Reply
Forwarding the open text message Forward > Add recipient / In sert template / Send
Correcti ng data input No I meant (XV)
(D Tips
-Fo r more information on supported cell
phones, v is it www .aud iusa .com/bluetooth
or contact an author ized A udi dealer or au­
thor ized Audi Se rvice Facility.
-Always read the chapter¢ page 194 , Audi
connect (Infotainment) general informa­
tion.
Navigation
Applies to: vehicles with voice recognition system and navigation system
Requiremen t: the Navigation menu m ust be
open
¢ table on page 168 .
Depending on the vehicle equipmen t an d these­
l ected menu item, you can say the following com ­
mands to enter a destination:
Function Say:
Opening the list of previous naviga -Last destinati ons
tion destinations
Access ing favo rites Navigation fa vori tes
Selecting the home add ress Home address or Driv e home
E nte ring a n add ress wi th guidance Enter address
> follow the system prompts
from the system
Individual commands for entering a Enter countr y/state / Ente r cit y/ Enter ZIP code / Enter
destination street/ Ent er hou se numb er
Making a correction wh ile entering a Correction
destination
Nav igating to a co ntact Drive me to
(XY) or Na vigate to contac t, for example Drive me
to "John Sm ith"
Navigating to a specific address for Na
vigate to co nta ct (X V) bu sine ss/ private ,
a contact for example "Navigate to John Smith pr ivate"
Nav igating to favorites Navigation favorite s> Line (XV) /
Line contents> Start route
guidance when prompted
170

Voice recognition s ystem
-Always read the chapter ¢ page 194, Audi
connect (Infotainment) general informa­ tion .
Radio
Applies to: vehicles with voice recognition system
Requirement: the Radio must already be open. Depend ing on the vehicle equipment and these­
lected frequency band, you ca n say the fo llow ing
commands :
Function Say:
Selecting the frequency band FM*/ Siriu sXM* / FM / AM
Selecting a station from t he s ta tion Channel (XV ) / !Frequenc y (XV)
list
Selecting a stat ion from favorites/
Radio presets > Line (XV)
presets
Setting the frequency
F requency (X V ) / Frequency ( XV) HO 1
Correct ing data inp ut No I meant (XV )
Closing the full-screen command Close
list
Media
Applies to: vehicles with voice recognition system
Requirement: you mus t be in the Media menu . Depending on the vehicle equipment and the ac­
t ive media, yo u can say the following commands :
Function Say:
Selecting a sou rce directly Ju kebox* / CO / DVD / SO card 1 / SO card 2 / Audi music inter-
face */ iPhone * / USB * / Bluetooth * / Wi -Fi * / Medium (XV) ,
for
exa mple "J o hn's player "
Selecting aud io/video" fi les in the
Media fa vorites I Artists / Albums / Genres I Tracks / Playlists /
Jukebox* Videos
Selecting aud io fi les on a n iP od Artists / Albu m is/ Genres I Track s/ Playlists / Compo sers I
(so urce: A udi music i nterface*) Podca st s / Aud io books
Nav iga ting with in a folder s truc-Folder up / Line (XV )
tu re/l ist
Selecting shuffle
Shuffle on / Shuffle off
Co rre ct in g data inp ut No I meant (XV )
Closing the full-screen command Close
list
@ Note External voice operation
Always follow the info rmation found in ¢@) in
Wi-Fi hotspot on page 194.
Applies to: vehicles with voice recognition system and exter·
nal voice operation
Requireme nt:
172

u co ..... N ,..._
N ..... 0 <( 0 00
The ignition and the MMI must be switched on.
No phone call is in progress.
The parking aid as well as the Audi voice recogni­
tion system must not be active .
A cell phone must be connected to the MMI with
the
Handsfree profile ¢page 174.
The cell phone being connected must have voice
control that can be controlled externally .
.. Switching on: press and hold the 5) button on
the multifunction steering wheel* and say the
desired command after the external speech di­
alog begins .
.. Continuing/resuming the dialog: the system
remains ready to use for a short time after end­
ing the dialog. You can start a new external dia­
log during this time. Press the
51 button if
needed, and say a new command .
Or: select
and confirm
Resume on the MMI control panel.
.,. Switching off: press and hold the 5) button .
Or: select and confirm Cancel on the MMI con­
trol panel.
(D Tips
- There are no voice guidance* prompts when
a dialog is active.
- This function depends on the cell phone
used. You can obtain more information
from your cell phone service provider or
from your cell phone user guide.
- AUDI AG simply provides access to control
your cell phone with voice operation and
does not take any responsibility for the con­
tents and commands within the external
voice control.
Voice recognition system
173

Tele phone
Telephone
Introduction
Applies to: vehicles with telephone
To make phone coils in your vehicle using the
/11/111, connect your cell phone to the /11/111 via
Bluetooth.
Hand sfree
After you have connected your ce ll phone to the
MMI via B luetooth, you can use the handsfree
system and operate telephone functions through
your
MMI. You can make calls using the antenna
on your cell phone.
A WARNING
-Medical experts warn that cell phones can
interfere w ith the funct ion of pacemakers .
Always mainta in a m inimum d istance of
about 8 inches (20 cm) between the ce ll
phone antenna and the pacemaker.
-Do not carry the cell phone in a pocket di ­
rectly over the pacemaker when the phone
is switched on.
-Sw itch the cell phone off immediately if
you suspect it may be interfering w ith the
pacemaker.
-Do not use the vo ice recognit ion system*
<=) page 167 in emergencies because your
vo ice may change in stressful situations. It
may take longer to dial the number or the
system may not be able to dia l it at all. Dial
the emergency n umbe r manua lly.
-Switch your cell phone off in areas where
there is a ris k of an exp losion . These loca­
tions are not always clearly mar ked. This
may include gas stations, fuel and chemical
storage facilities or transport vehicles, o r lo ­
cations where fue l vapors (such as propane
or gaso line vapor in vehicles or bui ldings),
chemicals or large quantities of dust parti ­
cles (such as flour, sawdust or metal) may
be present in the air . This also applies to all
other locations where you would normally
turn your vehicle engine off .
-The demands of traffic requ ire your full at­
tent io n. Always read the chapter
Q page 147, Traffic safety information.
174
-
@ Note
Always fo llow the information found in Q @ in
Wi -Fi hotspot on page 194.
(D Tips
-Th e Bluetooth connect ion range is limited
to inside the vehicle. It can also be affected by local conditions and interference with
other devices .
-To learn which Bluetooth connections and
wh ich of the funct ions in your ce ll phone are
supported, check with your cell phone serv­
ice provider or the database for mob ile devi­
ces at www .aud iusa .com/bluetooth.
Setup
Connecting a cell phone using Bluetooth
Applies to: vehicles with telephone
Fig . 172 D isp layin g the PIN for enter ing in t he cell phone
R equi rem ent
The vehicle must be stationary and the ignition
must be switched on.
The Bl uetooth settings m ust be open on your cell
phone during the connection setup.
The Bluetooth funct io n and v is ib il ity of the
MMI
Q page 248 and cell phone must be sw itched on.
The cell phone to be connected must not be con­ nected to any other Bluetooth device .
The
MMI mus t not be connected to a cell phone.
Conn ecting a c ell phon e
.. Select: IMENU I button> Telephone > Connect
mobile de vice > Find new de vic es > Next.
The
avai lab le Bluetooth devices are shown in the In-
fotainment system display.
Or select: ! MENUI 1111-

u co ..... N r--­N ..... 0 <( 0 00
button > Settings > left control button > MMI
settings
> Connection manager ¢ page 246.
~ Select and confirm the desired cell phone from
the list of displayed Bluetooth devices.
~ The MMI generates a PIN for the connection
setup
¢fig . 172.
~ Select and confirm Yes.
~ Enter the PIN for connecting on your cell
phone.
Or : when the PIN is displayed on your
cell phone, confirm the PIN on your cell phone
and in the MMI. The time allowed for entering
the PIN is limited to approximately 30 seconds.
~ Pay attention to any additional system prompts
displayed on your cell phone, for example if the
system should connect automatically in the fu­
ture. Depending on the cell phone, you may
have to confirm downloading the directory sep­
arately .
After connecting successfully
After connecting successfully, information about
the connected profiles will appear. You can also
change the profiles later. Select:
!MENUI button>
Settings > left control button > MMI settings >
Connection manager ¢ page 246 .
In addition, the cell phone contacts are automat­
ically loaded in the MMI directory. This process
can take several minutes, depending on the num ­
ber of contacts .
You can also make your connected cell phone the
default phone by selecting
Set as default tele­
phone
in the Connection manager ¢ page 248 .
@ Note
Always follow the information found in¢@) in
Wi-Fi hotspot on page 194.
(D Tips
-Making phone calls through the MMI is only
possible using the
Handsfree Bluetooth pro­
file.
- You can apply additional settings to con­
nected mobile devices using the
Connection
manager¢ page 246.
-You can also search for the MMI in your cell
phone using the Bluetooth device search.
Telephone
-You only have to pair your device one time.
Bluetooth devices that are already paired
automatically connect to the MMI when the
Bluetooth function is switched on, they are
within range and the ignition is switched on.
The last connected cell phone is given first
priority.
- Authorizing the MMI connection in your cell
phone will make automatic connection pos­
sible .
- Pay attention to any system prompts dis­
played on your cell phone, for example if
the system should connect automatically in
the future. Depending on the cell phone,
you may also need to download the directo­
ry and confirm access to your text messages
separately.
- When leaving the vehicle, the Bluetooth
connection to the cell phone will automati­
cally disconnect. Depending on your cell
phone, phone calls in progress may be auto­
matically redirected from the MMI to your
cell phone and you can continue the call on
your phone.
- You can obtain more information from your
cell phone service provider or from your cell
phone user guide. For information on using
the telephone, visit www.audiusa.com/
bluetooth or contact an authorized Audi
dealer or authorized Audi Service Facility.
- Applies to: veh icles without secondary
phone: Several cell phones can be paired to
the MMI, but only one cell phone can be ac­
tively connected to the MMI.
- App lies to: veh icles without seconda ry
phone: If a Bluetooth device is already con­
nected to the MMI, it will be disconnected
when another device connects to the MMI.
175

Tele phone
Operating two telephones through the
MMI
You can connect two cell phones to the MMI, for
example your business cell phone as the primary
phone and your private cell phone as the secon ­
dary phone . You can be reached in your vehicle
through both cell phones.
The first connected cell phone is displayed as the
primary phone in the MMI. The second cell phone
is connected as the secondary phone.
The directory from the connected pr imary p ho ne
w ill always be displayed. If you wou ld like to use
the directory from the seconda ry phone, yo u
must switch the primary and secondary p hone
¢ page 176.
Conn ecting a cell phone as the primary
phon e
Connect your ce ll phone to the MM I via Blue ­
tooth . The first connected cell phone is displayed
as the
P rimar y phone in the MMI.
See
~ page 17 4, Connecting a cell phone using
8/uetooth .
Connecting a cell phone as the secondary
phon e
Requirement: a cell phone must be connected to
the MMI as the primary phone.
Select:
! M ENU ! button> Telephone > right con ­
trol button >
Conn ect secondary tel ephon e.
See ~ page 17 4, Connecting a cell phone using
Bluetooth .
Example: you have connected your business ce ll
phone to the MMI as the primary phone and your
private cell phone as the secondary phone . To be
ab le to call contacts from your p rivate cell phone
d irecto ry , you must switch the pr ima ry and sec­
onda ry phone, s ince the directory from the p ri­
mary phone is a lways displayed.
Switching the primar y and secondary phone
Requ irement: a primary phone and a secondary
phone must be connected .
176
Switch primary and second. phone : select
IMENU! button> Telephone> right contro l but­
ton >
Swit ch prim ary and second. phone .
(D Tips
-Please note that on ly the directory from the
primary phone is always disp layed .
-You can see i f a cell phone is connected as
the primary phone or secondary p hone in
the
Connection manage r¢ page 246. Or:
the device name of the connected pr imary
phone is shown in the
Telephone menu
(such as myPhone).
-If the pr imary phone does not connect auto­
matically to the MMI when the ignit ion is
switched on, for example because it is out
of the ve hicle range o r the Bluetooth func­
t ion is switched off, then a p reviously pa ired
se condary p ho ne is automat icall y connected
as the p rim ary phone.
-You can send and rece ive messages on your
pr imary phone as we ll as o n your secondary
phone
¢page 177, fig. 173 . You do not
need to sw itch your pr imary phone and sec ­
ondary phone for this .
-You can also make you r connec ted cell
phone the defau lt phone by se lecting
Set as
default telephone
in the Connect ion man­
ager ¢ page 248.

u co ..... N r-­N .....
~ 0 co
Using the telephone
Opening the telephone
Applies to: veh icles wit h telephone
Fi g. 1 73 Example: telep hone f unctions in select io n me nu
F ig . 174 Examp le: add it io nal telepho ne funct ions in selec­
t ion menu
Re qui rement: a cell p hone must be co nnec ted to
t he MMI
c:::>page 1 74 .
"' Se lect: I MENU I but ton > Telephone > left con­
t ro l button.
The follow ing phone functions are available
c:::> fig . 173/ c:::> fig. 174:
CD
@
Ca ll list
Fa vo rit es .... ........... .. .. .
D irectory
Enter number ........ ...... . .
@
©
® Text me ssa ge (my Phone) */ text
mes sage (seco ndary phone)* ... .
® E-ma il (myPhone)*/e-mail (secon-
dary phone)* ................ .
177
179
183 177
180
181
The device name for your cell phone is disp laye d
in the
Telephone menu, for example text mes­
sage (myPhone)
¢ fig. 17 4.
Telephone
Dialing a phone number
App lies to : veh icles w it h te lep hone
Fig. 17S Numb er spelle r
Fig. 176 Dialin g a pho ne number from the c all l ist
"' Select: !ME NUI button> Telephone > left con-
t rol b utton .
Call list
Requirement: the call list must contain a phone
number.
T urn the cont rol knob to disp lay the ca ll list.
Se lect and confirm the de sir ed t ele phon e num­
ber from the re cen t ca lls li st.
Call lis t symbols
¢ fig . 176:
CD Missed calls
@ Dialed numbers
@ Accepte d calls
Se lect:
a contact from the list> right control but ­
ton .
-Call : call th e selec ted cont act.
- Connect secondary telephone */Switch primary
and second. phone* :
see c:::> page 176 .
- Edit phone number before calling : edit a
p ho ne number befo re dialing it. Selec t and con­
fi rm
OK to ed it . Or : pres s th e left con trol but ­
t on to re tu rn w it h out editing.
- Send text mes sage : write a text mess age to
t he sele cte d con ta ct .
177