2018 AUDI Q5 clock setting

Cockpit overv iew
may be higher if there is heavy eng ine load and
high temperatures outside . This is not a cause for
concern as long as
the .¢ page 24 or II
¢ page 24 indicator lights do not turn on.
Boost ind icator
Applies to: ve hicles w ith Audi virtual cockpit
The boost indicator is only displayed in the sport
view ¢ page 14 .
The current eng ine load (meaning the current
boost pressure) is indicated by a bar .
Head-up display
Appl ies to: ve hicles with hea d-up d isp lay
F ig. 16 Instrument pane l: knob for the head -up disp lay
I
The head-up display projects certa in warnings or
selected information from the assist systems * or
nav igation* on the windshield. The d isp lay ap­
pears within the driver's field of vision.
Switching on /off
.. To switc h the head-up disp lay on, press the~
knob .
.. To switch the head-up disp lay off, press the~
knob.
Adju sting the height
The height of the display can be adjusted to t he
individual driver.
.. Make sure yo u are seated correct ly
¢page 253 .
.. Turn the knob~ to adjust the display.
18
Settings in the Infotainment system
.. Select in the Infot ainment system: IMENU ! but­
ton
> Vehicle > l eft control b utton > Driver as­
sistance > Head-up di splay .
Display content
In the Infotainment system, you can spec ify
which information sho uld be disp layed: For ex ­
ample, this can include navigation information*,
adaptive cruise contro l* or camera -based tra ffic
s ign recognition *.
The display of ce rtain informa tion and some of
the red indica tor ligh ts cannot be h idden in the
Infotainment system .
Brightness
You can adjust the display br ightness in the Info­
ta inme nt sys tem. The display br igh tness dec reas ­
es autom atically as the amount of lig ht decreas­
es . The bac kg round br ightness is adjusted w ith
the instr ument
illumination ¢ page 49.
Picture rotation
You can rotate the picture in the Infotainment
system cloc kwise or counter clockwise .
(D Note
To prevent sc ra tches on the glass covering the
head-up display, do not p lac e any objects in
the project ion opening.
(D Tips
- Sunglasses with po larization filte rs and un­
favor able light ing cond itions can have a
negative effect on the disp lay.
- An opt imum d isp lay depends on the sea t
posit io n and the height ad justment of the
head -up disp lay.
- A spec ial windshie ld is needed for the head­
up display funct ion.
- For information on cleani ng,
see¢ table In­
terior cleaning on page 346.

u co .... N r--­N .... 0 <( 0 00
Releasing the parking lock using th e
e m erg enc y re leas e
~ To prevent the vehicle from ro lling unintention­
ally, set the parking brake(®}
c> page 80 or
press the brake pedal.
~ There are two slits o n the cover . Position the
screwdriver from the vehicle tool kit in one of
the slits on the cover and pry the cover off .
~ Insert the socket wrench (from the vehicle tool
ki t) into the openi ng
c> fig. 93.
~ T urn the soc ket wrench all the way clockw ise (!)
and press it downward @unti l it locks into
place .
~ Leave the socket wrench inserted i::> .&_.
Re setting the parking lock
~ Press t he b rake peda l and sta rt the eng ine.
~ Keep the brake pedal pressed and engage the
f o llowing se lector lever positions one afte r the
other : "N", "D" and back to "N" .
~ Turn the engine off again .
~ Grasp the socket wrench w ith both hands and
pull it up and out carefully to remove
c> (D .
~ Install the cover .
When the parking lock emergency re lease is
used, the
[O] ind icator light and the "N" selector
lever position turn on in the instrument cluster.
The message
D ang er of rolling a way! P not pos­
s ible . Plea se apply parking brake
also appears .
A WARNING
-Only activate the eme rgency re lease while
on a level s urface o r a s light slope.
- T he pa rking lock may only be released us ing
the emergency release if the parking brake
is set.
If i t i s no t fu nct ion ing, secure the ve ­
hicle from rolling using the brake ped al or
ot her s uitab le means, such as blocking a
front and a rear whee l. An unsec ured vehicle
may roll away, wh ich increases the r isk of an
acc ident.
- To reduce the risk of an accident, you m ust
not drive when the emergency re lease is ac­
t ivated.
-
Driving
@ Note
- Read and follow the important instructions
about
tow ing ¢ page 365 .
-The risk of damage increases if yo u do not
remove the socket wrench caref ully w hen
resetting the parking lock.
91

u co ..... N r--­N ..... 0 <( 0 00
System settings
Setting the date and
time
You can set the clock time manually or using the
CPS* .
.. Select : IMENU I button> Settings > left co ntro l
button >
MMI settings > Date & time.
.. Or : select : IMENU I button> Vehicle > left con-
t ro l button >
Vehicle settings > Date & time .
Automatic setting
When t his function is sw itched on g, the time
and date are a utomat ically set.
Time
R eq uirement: the Automatic setting must be
sw itched
off .
Press the cont ro l kn ob. Yo u ca n se t the Time
manually by turn ing and press ing the con trol
k nob.
Date
R eq uirement: the Automati c setting must be
sw itched
off.
Press the cont rol knob . Yo u can set the Date
manually by turn ing and press ing the cont rol
knob.
Time zone
When se lecting the approp riate t ime zone, a
sampling of countr ies in this zone will be listed .
Automatic time zone*
When t his function is sw itched on g , the time
will automatically ad just to the corresponding
time zone.
Automatic daylight saving time*
When t his function is sw itche d on g, the time
w ill automatically switc h to day light saving time .
Time format
If yo u select 24h , the clock will d isp lay, for ex­
a m ple,
13 :00 . If yo u se lec t AM /PM , the clock
w ill d isp lay, for examp le,
1 :00 PM .
System settings
Date format
If you select DD .MM .YYYY , the date displ ay will
show, for example ,
31.08.2018. If you select
MM /DD/YYYY , the date disp lay w ill show, for ex ­
amp le,
08/31/2018. If you select YYYY-MM­
DD ,
the date display will show, fo r example,
2018 -08 -31 .
MMI settings
.. Select: !ME NUI button> Settings > left control
button >
MMI settings .
Language
Yo u can c hange the display language as well as
the lang uage fo r the voice guidance * and voice
r ecognition system *.
T he num ber of langu ages av ailab le depends on
t h e ma rket.
Measurement units
The following meas urement u nits can be set de­
pend ing on ava ilab ility:
Speed , Distance , Tem­
perature , Fuel consumption , Volume , Pressure .
Tool tips
When this f unct ion is switched on g, yo ur MMI
shows you tips fo r inpu t. The freq uency of how
often it displays dec reases w ith time .
Speech dialog system
App lies to : vehicles wit h voice recog nitio n system
Depend ing on veh icle equipment, the following
funct ions may be ava ilable:
Command display : when this function is sw itch ­
ed on
g , th e M MI w ill show yo u the poss ible
commands for voice input in the respective
menu.
Short dialog : when this function is sw itche d on
g, a shorter form of the prompts is used .
Command during voice output*: thi s fu nction i s
swi tched on at the factory . W hen this func tion is
switched on
g , yo u can say new commands dur-
i ng announcements. You do not need to wa it for
the signal tone (beep) dur ing an announcement.
When the funct io n is swi tched off
0, you need to Iii>
245