2017 SUBARU IMPREZA bluetooth

3. When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth phone/device.

4. Check that “Connected” is displayed next to the
Bluetooth phone/device when the connection is
complete.

DELETING Bluetooth PHONES/DEVICES
1. Display the phone settings screen. (
WP.55)
2. Select the desired Bluetooth phone/device.
3. Select Delete (Delete).
4. Select Delete (Delete) when the con

SETTING THE AUTOMATIC CONNECTION
PRIORITY
The automatic connection priority of the registered Bluetooth
phones/devices can be changed.
1. Display the phone settings screen. (
WP.55)
2. Select the Bluetooth phone/device to be set.
3. Select (Reorder).
4. Select next to the desired Bluetooth phone/device,
and then drag it to the desired position.
Settings
3
Bluetooth® SETTINGS
61
Settings
3
docstructure.indb 612016/10/27 15:27:44

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. Display the general settings screen. (
WP.62)
2. Select (Driver Pro

75
Phone
Phone ScreenSome Basics Registering/Connecting A Bluetooth Phone Using The Phone Switch/Microphone Voice Recognition System About The Contacts In The Contact List When Selling Or Disposing Of The VehicleCalling On The Bluetooth Phone By The Last Number By Favorites List By Recent Calls List By Keypad By Contacts ListReceiving On The Bluetooth Phone Incoming CallsTalking On The Bluetooth Phone Sending Tones
Call WaitingBluetooth Phone Message Function Receiving A Message Checking Messages Replying To A Message (Quick Reply) Sending A New Short Message Calling The Message Sender
Phone Operation76
7677787879798080818282838384848585
86878889899091
Phone
docstructure.indb 752016/10/27 15:27:57

SOME BASICS
The hands-free system enables calls to be made and
received without having to take your hands off the steering
wheel.
This system supports Bluetooth. Bluetooth is a wireless
data system that enables cellular phones to be used without
being connected by a cable or placed in a cradle.
The operating procedure of the phone is explained here.
WARNING
lWhile driving, do not use a cellular phone or connect the Bluetooth phone.
lThis system is

NOTE
lInternational phone calls may not be made depending on the type of cellular phone you have.
BY KEYPAD
1. Display the phone screen. (
:P.80)
2. Select (Keypad), and then enter the phone
number.
3. Select (Call).
4. Check that the “Calling” screen is displayed.
NOTE
lDepending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone.
BY CONTACTS LIST
Calls can be made by using contact data which is
transferred from a registered cellular phone.
1. Display the phone screen. (
:P.80)
2. Select (Phonebook), and then select the
desired contact.