2017 NISSAN QASHQAI Owner´s Manual

4-92Heater, air conditioner, audio and phone systems
.Auto Reply (if so equipped)
Select to turn on or off the Auto Reply
function. When enabled, the vehicle will
automatically send a predefined text
message to the sender when a text
message is received while driving.
.Auto Reply Message (if so equipped)
Select to choose the message that is
sent when the Auto Reply function is
enabled. Choose from “I’m Driving” or
one of the three custom messages
stored in the system.
.Vehicle Signature On/Off (if so equipped)
Select to choose whether or not the
vehicle signature is added to outgoing
text messages from the vehicle. This
message cannot be changed or custo-
mized.
WARNING
.Use a phone after stopping your
vehicle in a safe location. If you
have to use a phone while driving,
exercise extreme caution at all
times so full attention may be given
to vehicle operation.
.If you are unable to devote full
attention to vehicle operation while
talking on the phone, pull off the
road to a safe location and stop
your vehicle.
CAUTION
To avoid discharging the vehicle bat-
tery, use a phone after starting the
engine.
Your vehicle is equipped with the Bluetooth
Š
Hands-Free Phone System. If you have a
compatible BluetoothŠenabled cellular phone,
you can set up the wireless connection between
your cellular phone and the in-vehicle phone
module. With Bluetooth
Šwireless technology,
you can make or receive a hands-free telephonecall with your cellular phone in the vehicle.
Once your cellular phone is connected to the in-
vehicle phone module, no other phone connect-
ing procedure is required. Your phone is
automatically connected with the in-vehicle
phone module when the ignition switch is
placed in the ON position with the connected
cellular phone turned on and carried in the
vehicle.
You can register up to five different Bluetooth
Š
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
at a time.
NISSAN Voice Recognition system supports the
phone commands, so dialing a phone number
using your voice is possible. For more details,
see “NISSAN Voice Recognition system (mod-
els with navigation system)” (P.4-99).
Before using the Bluetooth
ŠHands-Free Phone
System, refer to the following notes.
.Set up the wireless connection between a
cellular phone and the in-vehicle phone
module before using the Hands-Free Phone
System.
.Some Bluetooth
Šenabled cellular phones
may not be recognized by the in-vehicle
phone module. Please visit www.nissanusa.
com/bluetooth or www.nissan.ca/bluetooth
for a recommended phone list and connect-
BluetoothŠHANDS-FREE PHONE
SYSTEM (models with navigation
system)

ing.
.You will not be able to use a hands-free
phone under the following conditions:
— Your vehicle is outside of the cellular
service area.
— Your vehicle is in an area where it is
difficult to receive cellular signal; such as
in a tunnel, in an underground parking
garage, near a tall building or in a
mountainous area.
— Your cellular phone is locked to prevent it
from being dialed.
.When the radio wave condition is not ideal
or ambient sound is too loud, it may be
difficult to hear the other person’s voice
during a call.
.Immediately after the ignition switch is
placed in the ON position, it may be
impossible to receive a call for a short
period of time.
.Do not place the cellular phone in an area
surrounded by metal or far away from the in-
vehicle phone module to prevent tone quality
degradation and wireless connection dis-
ruption.
.While a cellular phone is connected through
the Bluetooth
Šwireless connection, the
battery power of the cellular phone may
discharge quicker than usual. The Blue-tooth
ŠHands-Free Phone System cannot
charge cellular phones.
.If the Bluetooth
ŠHands-Free Phone System
seems to be malfunctioning, visit www.
nissanusa.com/bluetooth or www.nissan.
ca/bluetooth for troubleshooting help.
.Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers.
Storing the device in a different location
may reduce or eliminate the noise.
.Refer to the cellular phone owner’s manual
regarding the telephone charges, cellular
phone antenna and body, etc.
.The signal strength display on the monitor
will not coincide with the signal strength
display of some cellular phones.
REGULATORY INFORMATION
FCC Regulatory information
.CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only
the supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regula-
tions..Operation is subject to the following two
conditions:
1) This device may not cause interference
and
2) This device must accept any interfer-
ence, including interference that may
cause undesired operation of the device.
IC Regulatory information
.Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the
device.
.This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
BluetoothŠis a trademark
owned by Bluetooth SIG, Inc.
and licensed to Robert Bosch
GmbH.
Heater, air conditioner, audio and phone systems4-93

4-94Heater, air conditioner, audio and phone systems
JVH1627X
CONTROL BUTTONS AND MICRO-
PHONE
Control buttons:
1. Volume control buttons
2. Menu control buttons/OK button
While using the voice recognition system,
push the
/buttons to manually
control the phone system.
3.
button
Push the
button to initiate a voice
recognition operation session or answer an
incoming call.
INFO:
If “Siri” on the phone settings menu is set to
“Short Press”, pushing and holding the
button initiates a voice recognition operation
session for Hands-Free Phone operation.
(See “Phone settings” (P.4-98) .)
4.
button
Push the
button to reject the call.
The
button located on the control panel can
also be used to operate the BluetoothŠHands-
Free Phone System.
Microphone:
Microphone is located near the map lights.
VOICE COMMAND
You can use voice commands to operate various
BluetoothŠHands-Free Phone System features
using the NISSAN Voice Recognition system.
For more details, see “NISSAN Voice Recogni-
tion system (models with navigation system)”
(P.4-99) .
Voice Prompt Interrupt
While using the Voice Recognition system, the
system voice can be interrupted to allow the
user to speak commands. While the system is
speaking, push the
button on the steering
wheel. The system voice will stop and a tone will
be heard. After the tone, speak desired com-mand (displayed on the touch screen) .
One Shot Call
To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, push
the
button and after the tone say, “Call
Redial”.

JVH1583X
Example
CONNECTING PROCEDURE
NOTE:
The connecting procedure must be per-
formed when the vehicle is stationary. If
the vehicle starts moving during the pro-
cedure, the procedure will be cancelled.
1. Push the APPS·i button on the control panel.
2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
4. Touch the “Connect New Device” key.
5. Initiate the connecting process from the
handset. The system will display the mes-
sage. If the PIN is displayed on yourBluetooth
Šdevice, select “Yes” to complete
the pairing process.
For more information, see the Bluetooth
Š
device’s owner’s manual.
VEHICLE PHONEBOOK
To access the vehicle phonebook:
1. Push the
button on the control panel.
2. Touch the “Phonebook” key.
3. Choose the desired entry from the displayed
list.
4. The number of the entry will be displayed on
the screen. Touch the number to initiate
dialing.
NOTE:
To scroll quickly through the list, touch the
“A-Z”key in the upper right corner of the
screen. Turn the ENTER AUDIO/TUNE·SC-
ROLL dial to choose a letter or number and
then push the ENTER AUDIO/TUNE·SC-
ROLL dial. The list will move to the first
entry that begins with that number or
letter.
MAKING A CALL
To make a call, follow the procedure below:
1. Push the
button on the control panel.
The “PHONE” screen will appear on the
display.
2. Select one of the following options to make
a call:
.“Phonebook”: Select the name from an entry
stored in the vehicle phonebook.
.“Call Lists”: Select the name from the
incoming, outgoing or missed.
.“Redial”: Dial the last outgoing call from the
vehicle.
.“
”: Input the phone number manually
using a keypad displayed on the screen. For
information on how to use the touch screen,
see “How to use touch screen” (P.4-4) .
RECEIVING A CALL
When a call is placed to the connected phone,
the display will change to phone mode.
To accept the incoming call:
.Push the
button on the steering wheel.
.Touch the call accept icon (
) on the
screen.
To reject the incoming call:
.Push the
button on the steering wheel.
Heater, air conditioner, audio and phone systems4-95

4-96Heater, air conditioner, audio and phone systems
.Touch the phone end icon () on the
screen.
DURING A CALL
While a call is active, the following options are
available on the screen:
.“Handset”
Select this option to switch control of the
phone call over to the handset.
.“Mute Mic.”
Select this option to mute the microphone.
Select again to unmute the microphone.
.Phone end (
) icon
Select to end the phone call.
ENDING A CALL
To end a phone call, select the phone end ()
icon on the screen or push thebutton on
the steering wheel.
TEXT MESSAGING (if so equipped)
WARNING
.Laws in some jurisdictions may
restrict the use of some of the
applications and features, such as
social networking and texting.
.Laws in some jurisdictions may
restrict the use of“Text-to-Speech”.Check local regulations before
using this feature.
.Use the text messaging feature after
stopping your vehicle in a safe
location. If you have to use the
feature while driving, exercise ex-
treme caution at all times so full
attention may be given to vehicle
operation.
.If you are unable to devote full
attention to vehicle operation while
using the text messaging feature,
pull off the road to a safe location
and stop your vehicle.
NOTE:
Many phones may require special permis-
sion to enable text messaging. Check the
phone’s screen during Bluetooth
Špairing.
For some phones, you may need to enable
“Notifications”in the phone’s Bluetooth
Š
menu for text messages to appear on the
vehicle audio system. See the phone’s
owner’s manual for details. Text message
integration requires that the phone sup-
port MAP (Message Access Profile) for
both receiving and sending text messages.
Some phones may not support all text
messaging features. Refer to www.nissa-nusa.com/bluetooth or www.nissan.ca/
bluetooth for compatibility information,
as well as your device’s owner’s manual.
The system allows for the sending and receiving
of text messages through the vehicle interface.
Sending a text message
1. Push thebutton on the steering wheel.
2. Say “Phone” after the tone.
3. Say “Send Text” after the tone.
4. The system will provide a list of available
commands in order to determine the reci-
pient of the text message. Choose from the
following:
.To (a name).Enter Number.Missed Calls.Incoming Calls.Outgoing Calls
For more information about these options,
see “Phone voice commands” (P.4-101) .
5. Once a recipient is chosen, the system
prompts for which message to send. Several
predefined and custom messages are avail-
able. To choose one of the predefined
messages, speak one of the following after
the tone:

.“Driving, can’t text”.“Call me”.“On my way”.“Running late”.“Okay”.“Yes”.“No”.“Where are you?”.“When?”.“Custom Messages”
To send one of the custom messages, say
“Custom Messages”. If more than one
custom message is stored, the system will
prompt for the number of the desired
custom message. For more information on
setting and managing custom text mes-
sages, see “Phone settings” (P.4-98) .
NOTE:
iPhone
Šcan only send text messages via
SiriŠEyes Free. (See“SiriŠEyes Free”(P.4-
78) .)
Reading a received text message
1. Push thebutton on the steering wheel.
2. Say “Phone” after the tone.
3. Say “Read Text” after the tone.
The text message, sender and delivery time are
shown on the screen. Use the menu control
buttons to scroll through all text messages ifmore than one are available. Push the
button to exit the text message screen. Push thebutton to access the following options for
replying to the text message:
.Call Back
Speak this command to call the sender of
the text message using the Bluetooth
Š
Hands-Free Phone System.
.Send Text
Speak this command to send a text mes-
sage response to the sender of the text
message.
.Read Text
Speak this command to read the text
message again.
.Previous Text
Speak this command to move to the
previous text message (if available) .
.Next Text
Speak this command to move to the next
text message (if available) .
NOTE:
Text messages are only displayed if the
vehicle speed is less than 5 MPH (8 km/h) .
Making custom messages with SiriŠ
Eyes Free
If a connected iPhoneŠis equipped with SiriŠ,it
can also be used to create custom messages.
(See “Siri
ŠEyes Free” (P.4-78).)
Heater, air conditioner, audio and phone systems4-97

4-98Heater, air conditioner, audio and phone systems
JVH0750X
PHONE AND BluetoothŠSETTINGS
To access the phone and BluetoothŠsettings:
1. Push the APPS·i button.
2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
Menu
ItemResult
Phone
SettingsFor detailed information, see “Phone
settings” (P.4-98) .
Connect
New De-
viceTouch to connect a new Bluetooth
Š
device to the BluetoothŠHands-Free
Phone System. (See “Connecting pro-
cedure” (P.4-95) .)
Select
Connec-
ted De-
viceTouch to choose a Bluetooth
Šdevice
from a list of those devices connected to
the Bluetooth
ŠHands-Free Phone
System.
Replace
Connec-
ted De-
viceTouch to replace a Bluetooth
Šdevice
from a list of those devices connected to
the Bluetooth
ŠHands-Free Phone
System.
Delete
Connec-
ted De-
viceTouch to delete a Bluetooth
Šdevice
from a list of those devices connected to
the Bluetooth
ŠHands-Free Phone
System.
BluetoothTouch to toggle Bluetooth
Šon and off.
Phone settings
To access the phone settings:
1. Push the APPS·i button.
2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
4. Touch the “Phone Settings” key and adjust
the following settings as desired:
.Start Siri by:
Touch “Short Press” or “Long Press” to sethow Siri
Šis operated on the steering wheel.
.Sort Phonebook By:
Touch “First Name” or “Last Name” to
choose how phonebook entries are alpha-
betically displayed on the screen.
.Use Phonebook From:
Touch “Handset” to use the phone’s phone-
book. Select “SIM” to use the phonebook on
the SIM card. Touch “Both” to use both
sources.
.Download Phonebook Now:
Touch to download the phonebook to the
vehicle from the chosen source.
.Record Name for Phonebook Entry:
Touch to record a name for a phonebook
entry for use with the NISSAN Voice
Recognition System.
.Phone Notifications for:
Touch “Driver” to have phone notifications
shown in the vehicle information display.
Touch “Both” to have phone notifications
shown in both the vehicle information dis-
play and the touch screen.
.Text Messaging (if so equipped):
Touch to toggle the text message function-
ality on or off.
.Show Incoming Text for (if so equipped):
Touch “Driver” to have incoming text notifi-

cations shown in the vehicle information
display. Touch “Both” to have text notifica-
tions shown in both the vehicle information
display and the touch screen. Touch “OFF”
to turn off all text notifications.
.Auto Reply (if so equipped):
Touch to toggle the auto reply functionality
on or off.
.Auto Reply Message (if so equipped):
Touch to indicate preferred message to be
sent when “Auto Reply” function is acti-
vated.
.Use Vehicle’s Signature (if so equipped):
Touch to toggle on or off the addition of the
vehicle signature to outgoing messages
.Custom Text Messages (if so equipped):
Touch this option to select a custom
message to edit. There are several custom
message slots available.The NISSAN Voice Recognition system allows
hands-free operation of the systems equipped
on this vehicle, such as the phone and naviga-
tion systems.
To operate NISSAN Voice Recognition, push the
button located on the steering wheel.
When prompted, speak the command for the
system you wish to activate. The command given
is picked up by the microphone and performed
when it is properly recognized. NISSAN Voice
Recognition will provide a voice response as
well as a message in the touch screen to inform
you of the command results.
USING THE SYSTEM
Initialization
When the ignition switch is placed in the ACC
or ON position, NISSAN Voice Recognition is
initialized, which takes a few seconds. When
completed, the system is ready to accept voice
commands. If the
button is pushed before
the initialization completes, the system will
announce: “Voice Recognition System not
ready. Please wait.”
Heater, air conditioner, audio and phone systems4-99
NISSAN VOICE RECOGNITION
SYSTEM (models with navigation
system)