2017 MINI Hardtop 2 Door Owner's Manual

Warning
with
braking
function
Display
If a collision with a person detected in this way is imminent, a warning symbol appears on the
instrument cluster and in the Head-up Display.
The red symbol is displayed and a signalsounds.
Intervene immediately by braking or
make an evasive maneuver.
Braking
intervention
The warning prompts the driver himself/herself
to react. During a warning, the maximum brak~ ing force is used. Premise for the brake booster
is sufficiently quick and sufficiently hard step~ ping on the brake pedal. The system can assistwith some braking intervention if there is risk of
a collision. At low speeds vehicles may thus come to a complete stop.
Manual transmission: During a braking inter~
vention up to a complete stop, the engine may be shut down.
The braking intervention is executed only if ve~ hicle stability has not been restricted, e.g. by deactivating the DSC Dynamic Stability Control.
The braking intervention can be interrupted bystepping on the accelerator pedal or by actively
moving the steering wheel.
Object detection can be restricted. Limitations
of the detection range and functional restric~ tions are to be considered.
System
limits
Safety
information WARNING
The system can react incorrectly or not at
all due to the system limits. There is a risk of ac~
cidents or risk of property damage. Observe the information regarding the system limits and ac~tively intervene, if needed. '

General
information'

Driving
stability
control
systemsVehicle
features
and
op

Indicator/warning
lightsThe indicator lamp flashes: DSC controlsthe drive and braking forces.
The indicator lamp lights up: DSC has
failed.
Deactivating
DSC:
DSC
OFF When DSC is deactivated, driving stability is re~
duced during acceleration and when driving in curves.
To increase vehicle stability, activate DSC again as soon as possible.
Deactivating
DSC Press and hold this button but not lon~
ger than approx. 10 seconds, until the
indicator lamp for DSC OFF lights up in the in~
strument cluster and displays DSC OFF.
DSC is switched off.
Activating
DSC Press button.
DSC OFF and the DSC OFF indicator
lamp go out.
Indicator/warning
lights When DSC is deactivated, DSC OFF is displayedin the instrument cluster.
The indicator lamp lights up: DSC is de~
activated.
Automatic
activation When DSC is deactivated, automatic activationoccurs in the following situations:'

To increase maneuverability, wheels are brakedindividually when a sporty driving style is used.
Dynamic
Damping
Con

With the appropriate equipment, the tuning ofthe suspension also changes and SPORT can be
individually configured.
The configuration is stored for the driver profile currently in use.
Activating
SPORT
Turn MINI Driving Modes switch to the left until SPORT is displayed in the instrument cluster.
Configuring
SPORT
Depending on your vehicle's optional features,
when the display is activated on the Control Display, the SPORT driving mode can be config~ured for individual specifications.
Activate SPORT.
Select "Configure SPORT". Configure the program.
SPORT can also be configured before it is acti~ vated:1. "Settings"2."Driving mode"3."Configure SPORT"
This configuration is retrieved when SPORT is
activated.
Configuring
driving
program
Settings can be made for the following driving programs in Driving mode:
'

Driving
comfortVehicle
features
and
op

Overview
Buttons
on
the
steering
wheelPress buttonFunctionCruise control on/off, refer to
page 128.Store/maintain speed, refer to
page 129.Pause cruise control, refer to
page 128.
Continue cruise control with the
last setting, refer to page 129.Reduce distance, refer to
page 129.Increase distance, refer to
page 129.Increase speed, refer to
page 129.Reduce speed, refer to page 129.
Buttons are arranged according to vehicle's ser~
ies, optional features and country specifica~
tions.
Camera
The camera is installed near the interior rear~ view mirror.
Keep the windshield in the area behind the in~
terior rearview mirror clean and clear.
Functional
requirements
Speed
range The system is best used on well-constructed
roads.
The system is functional at speeds beginning at approx. 20 mph/30 km/h.
The max. speed that can be set is
85 mph/140 km/h.
Active cruise control is paused below approx.
20 mph/30 km/h. The system does not brake to a stop.
Switching
on/off
and
interrupting
cruise
control
Switching
on Press button on the steering wheel.
Display in the instrument cluster lights up.
Display in the instrument cluster lights up. The current speed is adopted as de~sired speed and displayed with symbol.
Cruise control is active and maintains the set
speed.
DSC will be switched on if needed.
Switching
off Press button on the steering wheel.
The displays go out. The stored desired speed is
deleted.
Interrupting
manually Press button on the steering wheel.
Interrupting
automatically The system is automatically interrupted in thefollowing situations:Seite 128CONTROLSDriving
comfort128
Online Edition for Part no. 01 40 2 915 044 - X/16