2017 MERCEDES-BENZ E-CLASS SALOON warning

[x] Cancel search: warning

Page 364 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual &
WARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut thre ads or wheel hub/wheel mounting
bolt thre ads can cause the wheel bolts/
wheel nuts tocome loose.
As

Page 365 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual &
WARNING Risk of accident due toincor‐
re ct tigh tening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened tothe
prescribed torque. #
Have the tightening torque

Page 367 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual Note
s ontech nical data
Mercedes-AMG vehicles: be sure toobser ve
th e no tes in the Supplement. Otherwise, you
may failto recognise dangers.
The tech nical da tawa s de term ined in accord‐
ance w

Page 371 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual VIN in front of the
right-hand front seat 1
VIN (vehicle identification number)
2 Floor co vering VIN at the lo
wer edge of the windscreen 1
VIN (vehicle identi fication number)
The VIN at the lo wer

Page 372 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual +
ENVIRONMENTAL
NOTEEnvironmental
pollution caused byenvironmen tally ir re‐
sponsible disposal #
Dispose of operating fluids in an envi‐
ro nmentally responsible manner. Service products include

Page 374 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual Ne
verre fuel using petrol with a lo werRO N.
Fu rther information on fuel can be found:
R at a filling station
R at a qualified specialist workshop
Information on additives in petrol
Obser vethe no t

Page 378 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual &
WARNING Risk of an accident due to
va pour poc kets form ing in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake fluid. If t

Page 379 of 497

MERCEDES-BENZ E-CLASS SALOON 2017  Owners Manual Ha
ve the coolant regularly replaced at a qualified
specialist workshop.
The proportion of cor rosion inhibitor/antifreeze
concentrate in the engine cooling sy stem should
be:
R a minimum of 50% (anti