2017 MERCEDES-BENZ C-Class COUPE navigation

Settings in the climate menu
Setting the climate mode
By settingthe climate mode you determine the
type of airflow. The settingisa ctive when the air-
conditioning system is set to Ã
(
Ypage 123).
XCall up the climate control menu
(Ypage 262).
XTo select Climate Mode:turn and press the
controller.
XTo change the setting: turn the controller.
Exiting amenu:
XPress the %button.
The current airflow settingiss hown in the cli-
mate control bar: DIFFUSE
,MEDIUMor FOCUS.
Starting/stopping the perfume atomizer
The perfume atomizer makes it possible to scent
the air in individual compartments in the vehicle
interior. Further information (
Ypage 126).
XCall up the climate control menu
(Ypage 262).
XTo select AirFreshener:turn and press the
controller.
The settinge lement is active.
XTo start/stop the perfume atomizer: press
the controller.
XTo set the intensity: turn the controller when
the atomizer is switched on.
Exiting amenu:
XPress the %button.
Switching the ionization on/off
The ionization has acleansing effect on the air in
the vehicle interior. Further information
(
Ypage 128).
XCall up the climate control menu
(Ypage 262).
XTo select Ionization:turn and press the
controller.
The settinge lement is active.
XTo switch the ionization on/off:p ress the
controller.
Exiting amenu:
XPress the %button.
Settings in the bottom bar of the cli-
matec ontrol menu
Switching cooling with air dehumidifica-
tion on/off
XCall up the climate control menu
(Ypage 262).
XSlide6the controller repeatedly until the
bottom bar is activated.
XTo select OA/C:turn and press the control-
ler.
XSwitch cooling with air dehumidification on
O or off ª.
iThe current status of the cooling function is
displayed in the climate control bar: A/C ON
–a ctivated, A/C OFF –deactivated.
iDeactivating the cooling with air dehumidi-
fication function reduces fuel consumption.
Synchronizing the climate control set-
tings
Use OSync(synchronization) to select the cli-
mate control settingf or all zones togetherOor
separately ª.
XCall up the climate control menu
(Ypage 262).
XSlide6the controller repeatedly until the
bottom bar is activated.
XTo select OSync:turn and press the con-
troller.
XSwitch the synchronization function on Oor
off ª.
For further information on synchronizing climate
control settings, see (
Ypage 124).
Navigation mode
Important safety notes
GWARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is arisk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
Operating system263
Multimedia system
Z

is possible,park the vehicle paying attention
to traffic condition sand operatet he equip-
mentw hen the vehicle is stationary.
You must observe the legal requirements for the
countr yinwhich you are currently drivingw hen
operating the navigation system.
General notes
Among other things, correctf unctioning of the
navigation system depends on GPS reception. In
certain situations ,GPS receptio nmay be
impaired,t here may be interference or there
may be no receptio natall, e.g. in tunnels or
parking garages.
Audio 20 is equipped with MARGIN
®MAP PILOT
(see the manufacturer'so perating instructions).
The Garmin
®MAP PILOTo perating instructions
are stored on the SD memory card as aPDF file.
The SD card box contain saquick guide.
The followingd escriptions apply to navigation
with COMAND.F urther information can be
foundint he Digital Operator's Manual.
Selecting aroute typ eand route options
Multimedia system:
XSelect NaviQNavigation.
The map shows the vehicle's current position.
XSlide 6the controller.
XSelect OptionsQRouteS ettings.
Notes for routet ypes:
REco Route
RDynamic Traffic Route
Traffic reports on the routef or the routeguid-
anc eare taken int oaccount.
RCalculateA lternative Routes
Different routes are being calculated. Instead
ofStartselectt heContinuemenui tem.
Notes for routeo ptions:
RUse Toll Roads
The routecalculation includes roads which
require you to pay ausage fee (toll).
RUse Carpool Lanes(only available in the
USA)
Prerequisite: your vehicle meetst he access
condition sfor carpool lanes.
Carpool lanes will be included if the carpool
lanes optio nisactivated.
Entering an address
Multimedia system:
XSelect NaviQNavigation.
The map shows the vehicle's current position.
XSlide 6the controller.
XSelect DestinationQAddress Entry.
Enter an address,e .g. as follows:
RcityorZ IP code, street, house number
Rcountry, cit yorZIP code
RcityorZ IP code, center
Rstreet, cit yorZIP code, intersection
XSelect City.
The cit yinwhich the vehicle is currently loca-
ted (current vehicle position) is at the top.
Below this ,you will see locations for which
routeg uidancehas already been carried out.
XEnter the city.
The Gsymbol: the location is contained on
the digital map multiple times.
XTo switch to th elist: slide the 5control-
ler.
XSelec tthe location.
If available, the ZIP code is shown.Ift here are
differentZ IP codes available for the location,
the correspondin gdigits are displayed with an
X
.
XEnter the street and house number.
The address is in the menu.
Further options for destination entry:
Rsearchf orak eyword
The keywor dsearchf inds destinations using
fragment sofwords.
Rselectt he last destination
Rselectac ontact
RselectaP OI
You can searchf oraP OI by location, name or
telephonen umber.
Rselectdestination on the map
Renter intermediate destination
You can map the routetot he destination
yourself with up to four intermediate destina-
tions.
Rselectd estinations fromM ercedes-Benz
Apps
Rselectg eo-coordinates
264Operating system
Multimedia system

All important informationonthe emergency is
transmitted, for example:
Rcurrent location of the vehicl e(as determined
by the GP Ssystem)
Rvehicl eide ntificatio nnumber
Rinformatio nonthe severity of the accident
Shortly afte rthe emergency cal lhas been initi-
ated, avoice connectio nisa utomaticall yestab-
lishe dbetween the Customer Assistance Center
and the vehicl eoccupants.
RIf the vehicl eoccupants respond, the
Mercedes-Benz Customer Assistance Center
attempts to get more informatio nonthe
emergency.
RIf ther eisnor esponse from the vehicl eoccu-
pants, an ambulance is immediatelys ent to
the vehicle.
If no voice connectio ncan be established to the
Mercedes-Benz Customer Assistance Center,
the system hasb eenu nabl etoi nitiate an emer-
gency call.
Thi scan occur, for example, if the relevant
mobil ephone network is not available. The indi-
cato rlam pint he SOS button flashe scontinu-
ously.
The CallFailed
message appear sinthe mul-
tifunctio ndisplay and must be confirmed.
In thisc ase, summon assistance by other
means.
Making an emergenc ycall
XTo initiate an emergenc ycallm anually:
press cover :briefl ytoo pen.
XPress and hol dthe SOS button for at leas tone
second ;.
The indicator lamp in SOS button ;flashes
unti lthe emergency cal lisconcluded.
XWait for avoice connectio ntothe Mercedes-
Benz Customer Assistance Center.
XAfter the emergency call, close cover :.
If the mobil ephone network is unavailable,
mbrace will not be able to make the emergency
call. If yo uleave the vehicl eimmediatelya fter
pressing the SOS button, yo uwilln ot know
whethe rmbrace place dthe emergency call. In
thisc ase, always summona ssistance by other
means.
Roadside Assistance button
XTo cal lRoadside Assistance: press Road-
side Assistance button :.
Thi sinitiates acalltot he Mercedes-Benz Cus-
tome rAssistance Center.
The indicator lamp in Roadside Assistance
button :flashe swhile the cal lisactive. The
Connectin gCall
message appear sinthe
multifunctio ndisplay .The audi ooutputi s
muted.
If ac onnectio ncan be made ,the Cal lCon‐
nectedmessage appear sinthe multifunction
display.
If am obilephone network and GP Sreception
ar ea vailable, the system transfer sdatatot he
Mercedes-Benz Customer Assistance Center,
for example:
Rcurrent location of the vehicle
Rvehicl eide ntificatio nnumber
The multimedia system display indicates thata
cal lisa ctive. During the call, yo ucan change to
the navigation menu by pressing the NAVI but-
ton on the multimedia system ,for example.
Voice outpu tisn ot availabl einthiscase.
Av oice connectio nise stablished between the
Mercedes-Benz Customer Assistance Center
and the vehicl eoccupants.
278Features
Stowag eand featur es

From the remote malfunction diagnosis, the
Mercedes-Benz CustomerAssistance Center
can ascertai nthe nature of the problem
(
Ypage 282).
The Mercedes-Benz CustomerA ssistance Cen-
ter either send saqualified Mercedes-Benz tech-
nicia norm akesarrangements for your vehicle
to be transported to the nearest authorized
Mercedes-Benz Center.
You may be charged for services such as repair
wor kand/o rtowing.
You can find more information in the separate
mbrace manual.
The system has not bee nabletoi nitiate aRoad-
sid eA ssistance call, if:
Rthe indicator lamp for Roadsid eAssistance
cal lbutton Fis flashing continuously.
Rno voice connectio ntothe Mercedes-Benz
CustomerA ssistance Center wa sestab-
lished.
Thisc an occur if the relevant mobile phone net-
wor kisn ot available, for example.
The Call Failed
messag eappears in the mul-
tifunction display.
XTo end acall: press the ~button on the
multifunction steering wheel.
or
XPres sthe corresponding multimedia system
button for ending aphone call.
MB Info cal lbutton
XTo cal lMBInfo: press MB Info cal lbutton :.
Thisi nitiates acalltot he Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in MB Info cal lbutton :
flashesw hile the connectio nisbeing made.
The Connecting Call
messag eappears in the multifunction display. The audio output is
muted.
If ac onnectio ncan be made, the Call Con‐
nectedmessageappears in the multifunction
display.
If am obile phone network and GP Sreception
are available, the system transfers data to the
Mercedes-Benz CustomerA ssistance Center,
for example:
Rcurrent location of the vehicle
Rvehicle identification number
The multimedia system displa yindicates that a
cal lisa ctive. During the call, yo ucan chang eto
the navigation menu by pressing the NAVI but-
ton on COMAND, for example.
Voice output is not available in this case.
Av oice connectio nisestablishedb etween the
Mercedes-Benz CustomerA ssistance Center
and the vehicle occupants.
You receive information abouto perating your
vehicle, aboutt he nearest authorized
Mercedes-Benz Center and abouto ther prod-
ucts and services from Mercedes-Benz.
You can find further information on the mbrace
system under "Owners Online" at http://
www.mbusa.com.
The system has not bee nabletoi nitiate an MB
Info call, if:
Rthe indicator lamp in MB Info cal lbutton ï
is flashing continuously.
Rno voice connectio ntothe Mercedes-Benz
CustomerA ssistance Center wa sestab-
lished.
Thisc an occur if the relevant mobile phone net-
wor kisn ot available, for example.
The Call Failed
messag eappears in the mul-
tifunction display.
XTo en dacall:press the ~button on the
multifunction steering wheel.
or
XPres sthe corresponding multimedia system
button for ending aphone call.
Cal lpriority
Whe nservice calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency call
can stil lbeinitiated .Inthis case ,anemergency
cal lwillt ake priority and overrid eallother active
calls.
Features279
Stowage and features
Z

The indicator lamp of the respective button
flashes until the call is ended.
An emergencycall can only be terminated by the
Mercedes-Benz Customer Assistance Center.
All other calls can be ended by pressing:
Rthe ~ button on the multifunction steering
wheel
Rthe corresponding button in the multimedia
system to end the voice call
When acall is initiated, the audio system is
muted.
The mobile phone is no longer connected to the
multimedia system.
However, if you want to use your mobile phone,
do so only when the vehicle is stationary and in
as afe location.
Downloading destinations
Downloading destinations
Downloading destinations gives you access to a
database with over 15 million points of interest
(POIs). These can be downloaded on the navi-
gation system in your vehicle. If you know the
destination, the address can be downloaded.
Alternatively, you can obtain the location of
Points of Interest (POIs)/important destinations
in the vicinity.
Furthermore, you can download routes with up
to four way points.
You are prompted to confirm route guidance to
the address entered.
XSelect Yesby turning 3or sliding 1
the controller and confirm with 7.
The system calculates the route and subse-
quently start sthe route guidance with the
address entered.
If you select No
the address can be stored in
the address book.
The destination download function is available
if:
Rthe vehicle is equipped with anavigation sys-
tem.
Rthe relevant mobile phone network is availa-
ble and data transfer is possible.
Route Assistance
This service is part of the mbrace PLUS Package
and cannot be purchased separately. You can use the route assistance function even
if the vehicle is not equipped with anavigation
system.
Within the framework of this service, you receive
ap rofessional and reliable form of navigation
support without having to leave your vehicle.
The customer service representative finds a
suitable route depending on your vehicle's cur-
rent position and the desired destination. You
will then be guided live through the current route
section.
Search &Send
General notes
To use "Search &Send", your vehicle must be
equipped with mbrace and anavigation system.
Additionally, an mbrace service subscription
must be completed.
"Search &Send" is adestination entr yservice. A
destination address which is found on Google
Maps
®can be transferred via mbrace directly to
your vehicle's navigation system.
Specifying and sending the destination
address
XGo to the website http://maps.google.com
and enter adestination address into the entry
field.
XTo send the destination address to the e-
mail address of your mbrace account:
click on the corresponding button on the web-
site.
Example:
If you select 'Send to vehicle' and then
'Mercedes-Benz', the destination address will
be sent to your vehicle.
XWhen the "Send" dialog window appears:
Enter the e-mail address you specified when
setting up your mbrace account into the cor-
responding field.
XClick "Send".
Information on specific commands such as
"Address entry" or "Send" can be found on the
website.
Calling up atransmitted destination
address
XTurn the SmartKey to position 2in the ignition
lock (Ypage 131).
The transmitted destination address is loaded
into the vehicle's navigation system.
280Features
Stowage and features

Adisplay message appears, asking whether
navigation shoul dbestarted.
XSelect Yesby turning 3or sliding 1
the controller and confirm with 7.
The system calculate sthe route and subse-
quentlys tarts the route guidance with the
address entered.
If yo uselect No
the address can be stored in
the address book.
If yo uhaves ent more thano ne destination
address, each individual destination must be
confirmeds eparately.
Destination addresse sareloaded in the same
order as the order in which they were sent.
If yo uown multipl eMercedes-Benz vehicles with
mbrace and activated mbrace accounts:
If multipl evehicles ar eregistere dunder the
same e-mail address, the destination will be
sent to al lthe vehicles.
Vehicl eremote opening
Youc an us ethe vehicl eremote opening if you
have unintentionall yloc ked your vehicl eand a
replacement SmartKeyisn ot available.
The vehicl ecan be opene dbythe Mercedes-
Benz Customer Assistance Center.
The vehicl ecan be immediatelyo pened
remotel ywithinf ourd aysoft he ignition being
turned off. After thist ime,the remote unlocking
maybed elayedby 15 to 60 minutes. After
30 days ,the vehicl ecan no longerbeo pened
remotely.
The vehicl eremote unlocking feature is availa-
bl eift he relevant mobil ephone network is avail-
able and adatac onnectio nisp ossible.
XContact the following service hotlines:
Mercedes-Benz Customer Assistance Center
at 1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
Yo uw illbea sked for your password.
XReturn to your vehicl eatthe time agree dupon
with the Mercedes-Benz Customer Assis-
tance Center.
Alternatively ,the vehicl ecan be opene dvia:
Rthe Internet, under the "Owners Online "sec-
tion
Rthe telephone applicatio n(e. g. for iPhone®,
Android)
To do this ,you will need your identification num-
ber and password.
Vehicl eremote closing
The vehicl eremote-closing feature can be used
when yo uhavef orgotten to lock the vehicl eand
yo ua re no longer nearby.
The vehicl ecan then be locked by the Mercedes-
Benz CustomerA ssistance Center.
The vehicl ecan be immediately remotely locked
within fourd aysoft he ignition being turne doff.
After this time ,remote closing may be delayed
by 15 to 60 minutes .After 30 days the vehicle
can no longer be locked remotely.
The vehicl eremote closing feature is available if
the relevant mobil ephone network is available
and adatac onnection is possible.
XContact the following service hotlines:
Mercedes-Benz CustomerA ssistance Center
at 1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
Yo uw illbea sked for your password.
The next time yo uare inside the vehicl eand you
switch on the ignition, the DoorsLocked
Remotelymessage appears in the multifunction
display.
Alternatively, the vehicl ecan be locked via:
Rthe Internet, under the "Owners Online" sec-
tion
Rthe telephone application (e .g.for iPhone®,
Android)
To do this ,you will need your identification num-
ber and password.
Stolen vehicle recovery service
If your vehicl ehasbee nstolen:
XNotify the police.
The police will issue anumbere dincident
report.
XThi sn umber will be forwarded to the
Mercedes-Benz CustomerA ssistance Center
together with your PIN.
The Mercedes-Benz CustomerA ssistance
Center then trie stolocate the system. The
Mercedes-Benz CustomerA ssistance Center
contacts yo uand the local la wenforcement
agency if the vehicl eislocated.
However, only the la wenforcement agency is
informed of the location of the vehicle.
If the anti-theft alarm system is activate dfor
longer than 30 seconds ,the Mercedes-Benz
CustomerA ssistance Center is automatically
notified.
Features281
Stowage and features
Z