Page 179 of 772

•(Except European model)
•(Manual transaxle)
A sound is activated when the door is opened while the engine idling is stopped with
the shift lever in a position other than neutral. In this case, the engine does not restart
automatically to ensure safety. Shift the shift lever to neutra l and start the engine.
NOTE
A problem in the system may be indicated under the following conditions. Have your vehicle
inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
•The light does not turn on when the ignition is switched ON.
•The light continues to remain on even though the i-stop OFF switch has been pressed
while the engine is running.
When the light is flashing
The light continues to flash if the system has a malfunction. Have your vehicle inspected at
an expert repairer, we recommend an Authorised Mazda Repairer.
i-stop indicator light (green)
When the light is turned on
•The light turns on while engine i dling is stopped and turns off when the engine is
restarted.
•(Except European model)
The light turns on when the engine idling stop conditions are m et while the vehicle is
driven.
When the light is flashing
•(Manual transaxle)
•(SKYACTIV-G 2.0, SKYACTIV-G 2.5)
By depressing the clutch pedal or starting to release it, the engine restarts automatically
and the light turns off.
•(SKYACTIV-D 2.2)
By depressing the clutch pedal, the engine restarts automatical ly and the light turns off.
•(European model)
The light flashes when the driver's door is opened while engine idling is stopped to notify
the driver that engine idling is stopped. It turns off when the driver's door is closed.
When Driving
Start/Stop Engine
4-20
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 180 of 772
•(Except European model)
•(Manual transaxle)
The light flashes when the shift lever is shifted to a position other than the neutral while
engine idling is stopped to notify the driver that engine idlin g is stopped.
•(Automatic transaxle)
The light flashes if the vehicle is stopped but the brake pedal is not depressed with
sufficient force. Depress the bra ke pedal a little more strongly because the pedal force
may be insufficient.
When Driving
Start/Stop Engine
4-21
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 196 of 772

NOTE
•If any of the INFO switch is pressed
while a message is displayed, it will no
longer be displayed the next time the
ignition is switched ON.
•After the vehicle is serviced and the
remaining time/distance is reset, the
message for the next maintenance
period will be displayed when the
remaining distance or time to the next
maintenance period approaches 0
(displays when engine is started).
•If there are multiple messages, they are
displayed according to their order.
•If OFF is set for Messages, messages
are not displayed.
▼Blind Spot Monitoring (BSM)
Display
Displays the system status.
Refer to Blind Spot Monitoring (BSM) on
page 4-115.
▼Distance Recognition Support
System (DRSS) Display*
Displays the distance between your
vehicle and the vehicle ahead.
Refer to Distance Recognition Support
System (DRSS) on page 4-127.
▼Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) Display
*
Displays the currently set system status.
Refer to Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) on page 4-149.
▼Mazda Radar Cruise Control
(MRCC) Display*
Displays the currently set system status.
Refer to Mazda Radar Cruise Control
(MRCC) on page 4-137.
When Driving
Instrument Cluster and Display
*Some models.4-37
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 204 of 772
SignalWarning Page
*Door-Ajar Warning Indication 7-53
*Liftgate-Ajar Warning Indication7-53
*Door-Ajar Warning Light
7-53
*1 The light turns on when the i
gnition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If t he light does not turn on or remains turned on, have the vehicle inspected at an
expert repairer, we recommend an Authorised Mazda Repairer.
▼ Indication/Indicator Lights
These lights turn on or flash to
notify the user of the system operation status or a system
malfunction.
Signal Indicator Page
(Green)*Seat Belt Indicator Light (Rear seat) 2-21
*Front Passenger Air Bag Deactivation Indicator Light*12-58
(Green)
*KEY Indicator Light
4-5
(Green)
*i-stop Indicator Light4-19
(White)*i-ELOOP Indication4-94
Security Indicator Light*13-48
When Driving
Instrument Cluster and Display
*Some models.4-45
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 210 of 772

Manual Transaxle ShiftPattern
Neutral position
The shift pattern o f the transaxle is
conventional, as shown.
Depress the clutch pedal all the way down
while shifting; then release it slowly.
Your vehicle is equipped with a device to
prevent shifting to R (reverse) by mistake.
Push the shift lever downward and shift to
R.
WA R N I N G
Do not use sudden engine braking on
slippery road surfaces or at high speeds:
Shifting down while driving on wet, snowy,
or frozen roads, or while driving at high
speeds causes sudden engine braking,
which is dangerous. The sudden change in
tyre speed could cause the tyres to skid.
This could lead to loss of vehicle control
and an accident.
Always leave the shift lever in 1 or R
position and set the parking brake when
leaving the vehicle unattended:
Otherwise the vehicle could move and
cause an accident.
CAUTION
Keep your foot off the clutch pedal except
when shifting gears. Also, do not use the
clutch to hold the vehicle on an upgrade.
Riding the clutch will cause needless
clutch wear and damage.
Do not apply any excessive lateral force
to the shift lever when changing from
5th to 4th gear. This could lead to the
accidental selection of 2nd gear, which
could result in damage to the transaxle.
Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is still
moving may damage the transaxle.
NOTE
•If shifting to R is di fficult, shift back into
neutral, release the clutch pedal, and try
again.
•(With i-stop function)
If the engine has stopped due to stalling,
it can be restarted by depressing the
clutch pedal within 3 seconds of the
engine stopping.
When Driving
Manual Transaxle Operation
4-51
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 211 of 772
The engine cannot be restarted even if
the clutch pedal is depressed under the
following conditions:
•The driver's door is open.
•The driver's seat belt is unfastened.
•The clutch pedal is not released
completely after the engine stalled.
•The clutch pedal is depressed with the
engine not stopped completely.
•(With parking sensor system)
When the shift lever is shifted to the R
position with the ignition switched ON,
the parking sensor system is activated
and a beep sound is heard.
Refer to Parking Sensor System on page
4-229.
When Driving
Manual Transaxle Operation
4-52
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 215 of 772

Transaxle Ranges
•The shift position indication in the
instrument cluster illuminates. Refer to
Warning/Indicator Lights on page 4-42.
•The selector lever must be in P or N to
operate the starter.
P (Park)
P locks the transaxle and prevents the
front wheels from rotating.
WA R N I N G
Always set the selector lever to P and set
the parking brake:
Only setting the selector lever to the P
position without using the parking brake to
hold the vehicle is dangerous. If P fails to
hold, the vehicle could move and cause an
accident.
CAUTION
Shifting into P, N or R while the vehicle is
moving can damage your transaxle.
Shifting into a driving gear or reverse
when the engine is running faster than
idle can damage the transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 3-56).
NOTE
(With parking sensor system)
When the selector lever is shifted to the R
position with the igni tion switched ON, the
parking sensor system is activated and a
beep sound is heard.
Refer to Parking Sensor System on page
4-229.
N (Neutral)
In N, the wheels an d transaxle are not
locked. The vehicle will roll freely even
on the slightest inclin e unless the parking
brake or brakes are on.
WA R N I N G
If the engine is running faster than idle, do
not shift from N or P into a driving gear:
It's dangerous to shift from N or P into a
driving gear when the engine is running
faster than idle. If this is done, the vehicle
could move suddenly, causing an accident
or serious injury.
Do not shift into N when driving the
vehicle:
Shifting into N while driving is dangerous.
Engine braking cannot be applied when
decelerating which could lead to an
accident or se rious injury.
CAUTION
Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.
When Driving
Automatic Transaxle
4-56
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2
Page 234 of 772

Rear Window Wiper andWa s h e r
The ignition must be switched ON to use
the wiper.
▼Rear Window Wiper
Turn the wiper on by turning the rear
wiper/washer switch.
Switch Position
Wiper operation
No. Ty p e
A Ty p e
B
Stop
Intermittent
Normal
▼ Rear Window Washer
To spray washer fluid, turn the rear wiper/
washer switch to either of the
position.
After the switch is released, the washer
will stop.
If the washer does not work, inspect the
fluid level (pa ge 6-32). If the fluid level
is normal and the washer still does not
work, consult an expert repairer, we
recommend an Authorised Mazda
Repairer.
Headlight Washer*
The engine must be started and the
headlights must be turned on.
If you want to operate headlight washers,
double flick the wiper lever.
Washer
OFF
NOTE
•When the windscreen washer is
operated for the first time after turning
on the headlights, the headlight washers
operate automatically.
•If air enters the headlight washer fluid
pipe under conditions such as when the
vehicle is brand-new or after an empty
washer tank is replenished with washer
fluid, washer fluid will not spray even
when the wiper lever is operated. If this
occurs, perform the following
procedure:
1. Start the engine.
2. Turn on the headlights.
3. Double flick the wiper lever several
times until the washer fluid sprays.
When Driving
Switches and Controls
*Some models.4-75
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2