2017 LEXUS LS600H Owners Manual

1292. Instrument cluster
2
Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
CAUTION
■The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal informa-
tion display. At extremely low temperatures, the information display monitor may
respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number
appearing on the display. This lag could cause the driver to downshift again, caus-
ing rapid and excessive engine braking and possibly an accident resulting in death
or injury.
■Cautions during setting up the display
As the hybrid system needs to be operating during setting up the display, ensure
that the vehicle is parked in a place with adequate ventilation. In a closed area such
as a garage, exhaust gases including harmful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
■During setting up the display
To prevent 12-volt battery discharge, ensure that the hybrid system is operating
while setting up the display features.

1302. Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
Multi-information display
Remote Touch screen
“MENU” button
Remote Touch knob
“ENTER” button
Energy monitor/consumption screen
You can view the status of your hybr id system on the multi-information
display and the Remote Touch screen.
The energy monitor or consumption screen can be displayed and oper-
ated on the side display.
1
2
3
4
5

1312. Instrument cluster
2
Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
■Remote Touch screen (P. 390)
Press the “MENU” button on the Remote Touch, and then select
on the “Menu” screen.
If the “Trip information” or “Past record” screen is displayed, select “Energy”.
■Multi-information display
Press the “DISP” button on the
steering wheel several times to
select the energy monitor display.
Energy monitor

1322. Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
These images are examples only, and may vary slightly from actual conditions.
Remote Touch screenMulti-information display
When the vehicle is pow-
ered by the electric motor
(traction motor)
When the vehicle is pow-
ered by both the gasoline
engine and the electric
motor (traction motor)
When the vehicle is pow-
ered by the gasoline engine
When the vehicle is
charging the hybrid battery
(traction battery)
When there is no energy
flow
Hybrid battery (traction bat-
tery) status
LowFullLowFull

1332. Instrument cluster
2
Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
■Trip information
Press the “MENU” button on the Remote Touch, and then select
on the “Menu” screen.
If the “Energy monitor” or “Past record” screen is displayed, select “Trip infor-
mation”.
Resetting the consumption
data
Fuel consumption in the past
15 minutes
Current fuel consumption
Regenerated energy in the
past 15 minutes
One symbol indicates 30 Wh. Up
to 5 symbols are shown.
Average vehicle speed since
the hybrid system was started.
Elapsed time since the hybrid
system was started.
Cruising range ( P. 135)
Average fuel consumption for the
past 15 minutes is divided by
color into past averages and
averages attained since the
power switch was last turned to
ON mode. Use the displayed
average fuel consumption as a
reference.
The image is an example only, and
may vary slightly from actual condi-
tions.
Fuel Consumption
1
2
3
4
5
6
7

1342. Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
■Past record
Press the “MENU” button on the Remote Touch, and then select
on the “Menu” screen.
If the “Energy monitor” or “Trip information” screen is displayed, select “Past
record”.
Resetting the past record data
Best recorded fuel consump-
tion
Average fuel consumption
Previous fuel consumption
record
Updating the average fuel
consumption data
The average fuel consumption
history is divided by color into
past averages and the average
fuel consumption since the last
updated. Use the displayed aver-
age fuel consumption as a refer-
ence.
The image is an example only, and
may vary slightly from actual condi-
tions.
1
2
3
4
5

1352. Instrument cluster
2
Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
■Updating the past record data
Update the average fuel consumption by selecting “Update” to measure the current
fuel consumption again.
■Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■Cruising range
Displays the estimated maximum distance that can be driven with the quantity of fuel
remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.

1362. Instrument cluster
LS600h/LS600hL_EE(OM50G20E)
Vehicle information can be displayed on the side display (P. 396), then
select “<” or “>” to select the desired screen.
Fuel consumption
Displays the average fuel consump-
tion and regenerated energy for the
past 10 minutes in 1 minute intervals,
as well as the cruising range.
Past record
Displays the average fuel consump-
tion and highest fuel consumption.
Trip information
Displays the cruising range, average
fuel consumption and the amount of
time elapsed since the hybrid sys-
tem was started.
Using the side display