3274-5. Using the driving support systems
4
Driving
LS600h/LS600hL_EE(OM50G20E)
■Lane departure warning function
●When the vehicle speed is approximately 48 km/h (30 mph) or
more
●When the lane width is more than approximately 3.0 m (9.8 ft.)
●When driving on a straight road or through a curve with a radius of
more than approximately 120 m (394 ft.)
■Lane keeping assist function
●When the vehicle speed is between approximately 72 and 180 km/h
(45 and 112 mph)
●When the vehicle-to-vehicle distance mode of the dynamic radar
cruise control with full-speed range is on, and the set vehicle speed is
approximately 72 km/h (45 mph) or more (the function will not
operate when the dynamic radar crui se control with full-speed range
is in set speed mode)
●When the lane width is between approximately 3.0 and 4.0 m
(9.8 and 13.1 ft.)
●When driving on a straight road or through a curve with a radius of
more than approximately 200 m (656 ft.)
Operating conditions for each function
5276-3. Do-it-yourself maintenance
6
Maintenance and care
LS600h/LS600hL_EE(OM50G20E)
When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width and
inset*.
Replacement wheels are available at any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional.
*: Conventionally referred to as “offset”.
Lexus does not recommend using the following:
●Wheels of different sizes or types
●Used wheels
●Bent wheels that have been straightened
●Use only Lexus wheel nuts and wheel nut wrenches designed for use
with your aluminum wheels.
●When rotating, repairing or changing your tires, check that the wheel
nuts are still tight after driving 1600 km (1000 miles).
●Be careful not to damage the aluminum wheels when using tire chains.
●Use only Lexus genuine balance weights or equivalent and a plastic or
rubber hammer when balancing your wheels.
Wheels
If a wheel is bent, cracked or heavily corroded, it should be replaced.
Otherwise, the tire may separate from the wheel or cause a loss of han-
dling control.
Wheel selection
Aluminum wheel precautions
620
LS600h/LS600hL_EE(OM50G20E)
8-1. Specifications
Dimensions
*1: Unladen vehicles
*2: Vehicles without paddle shift switches
*3: Vehicles with paddle shift switches
Weights
*1: With relaxation seat
*2: Without relaxation seat
*3: 5-seat models with relaxation seat
*4: Except 5-seat models with relaxation seat
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall lengthLS600hL 5210 mm (205.1 in.)
LS600h 5090 mm (200.4 in.)
Overall width 1875 mm (73.8 in.)
Overall height*11480 mm (58.3 in.)*2
1470 mm (57.9 in.)*3
WheelbaseLS600hL 3090 mm (121.7 in.)
LS600h 2970 mm (116.9 in.)
TreadFront 1610 mm (63.4 in.)
Rear 1610 mm (63.4 in.)
Gross vehicle mass
LS600hL
(5-seat models)
2815 kg (6206 lb.)*1
2785 kg (6140 lb.)*2
LS600hL
(4-seat models) 2750 kg (6062 lb.)
LS600h 2765 kg (6095 lb.)
Maximum permis-
sible axle capacity
Front 1395 kg (3075 lb.)
Rear 1465 kg (3230 lb.)*3
1460 kg (3219 lb.)*4
