2017 Hyundai Ioniq Hybrid Multimedia Manual

Voice Recognition Screen Overview I 7-7
07
Instructions for Using
Voic e R e cognit ion
NameDescription
Detail
instruction This section describes
how to use voice recog-
nition in detail.
Close button
Closes the screen and
restarts voice recogni-
tion.
Information

In the instructions screen, no voice is
recogniz
ed, so you must manually issue
commands. Because the instructions screen
displays a lot of content, you cannot view it
while driving for safety precautions.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-8 I Voice Recognition
Voice Commands
Types of Commands
Voice recognition commands are classified as “Global Commands”
and “Local Commands”.
1. Global Commands (
●): Commands that can be used immedi-
ately after activating voice recognition.
2. Local Commands (
○): Commands that can be used when a
multimedia, navigation, or Bluetooth call is running, or displayed
on the screen, after activating voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after con- necting a Bluetooth device.
2. To call a person, for example “Call ” whose name is listed in Contacts, you must first download the Contacts list.
For details on downloading contacts, see “Part 4. Bluetooth >
Chapter 3. Bluetooth Phone > 4.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you
cannot make a call by name yet. The time it takes to convert
voice data may vary depending on the number of Contacts
downloaded on the phone.
Command Operation
●CallDisplays downloaded Contacts, after this
you can make a call by saying the name.
●Call You can directly call a person by
in the downloaded Contacts.
●Call on
MobileYou can call a person directly to
the number that is saved as “Mobile” in
the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
●Call at
WorkYou can call a person directly to
the number that is saved as “Work” in the
downloaded Contacts.
e.g.) Call “John Smith” at Work
●Call at
HomeYou can call a person directly to
the number that is saved as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
●Call on
OtherYou can call a person directly to
the number that is saved as other than
“Mobile, Home, or Work” in the down-
loaded Contacts.
e.g.) Call “John Smith” on Other
●Dial Number
Displays a screen where you can say a
phone number to dial.
●Dial You can directly say the number to call.
e.g.) Dial 111 555 1234
●RedialDirectly calls at the number that you last
dialed.
●Call HistoryDisplays your Call History, where you can
say the list number to make a call.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





Voice Commands I 7-9
07
Navigation Commands
* Check the following before you use navigation commands:
1. Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/ province and then look it up.
Find Address is classified by states/provinces to provide you with faster service.
2. Some commands such as “Cancel Route” are available only when the destination is fixed.
Command Operation
●Find Address
in
•
Finds the address in and sets it as
the destination.
e.g.) Find Address in California
•
To find an address, you should say “House
Number →
Street →
City”

e.g.) 300 (Three Zero Zero) Main Street, Almond
●Find Address Finds the address and sets it as the destination.
●Find POIFind the points of interest. After this command,
you can find the name of a location step-by-
step.
●Find
Immediately finds . For detail of
, see “Find ” list.
e.g.) Find “Banks”
Command
Operation
●MapMoves to the current position on the naviga-
tion map
●Previous
PointsDisplays a list combining Previous Destinations,
Previous Searches, and Previous Starting Points
all together.
You can then set a destination by saying the list
number.
●Previous
Destinations
Displays a list of recent destinations that you
can return to by saying the number in the list.
●Previous
SearchesDisplays a list of recent searches, where you
can set a destination by saying the number in
the list.
●Previous
Starting Points
Displays a list of recent starting points that you
can return to by saying the number in the list.
●Traffic
Information
Moves to the Traffic Information menu screen.
●Go HomeSet the destination to your home.
Your home must first be set in the Navigation
system.
●Go to OfficeSet the destination to your office/work.
Your office/work must first be set in the
Navigation system.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





7-10 I Voice Recognition
CommandOperation
●Turn Guidance
OnTurns on the voice guidance system.
●Turn Guidance
OffTurns off the voice guidance system.
●Zoom All the
Way OutZooms out from the navigation map to the
fullest.
●Zoom All the
Way In
Zooms in on the navigation map to the fullest.
●Cancel RouteCancels the route to the fixed destination and
exits guidance.
●Destination
InformationTells you the remaining distance and time to
your destination.
●Route OptionsRestarts the route to your destination.
You can then select either “Faster Time” or
“Shorter Distance”.
●Find Faster
Time RouteStarts a new route to your destination that
will take the least amount of time.
●
Find Shorter
Distance
RouteStarts a new route to your destination that
will use the shortest distance.
●Emergency
ServicesDisplays a list of nearest Police Station,
Hospital, Dealership, or Road Assistance.
You can then set a destination by saying the
list number.
●Police Station
Displays a list of the nearest police stations.
You can then set a destination by saying the
list number.
Command
Operation
●HospitalDisplays a list of the nearest hospitals.
You can then set a destination by saying the
list number.
●DealershipDisplays a list of the nearest car dealerships.
You can then set a destination by saying the
list number.
●Road
AssistanceDisplays a list of the nearest road assistance
locations.
You can then set a destination by saying the
list number.
●Show Route
Displays a map overview of the entire route
to your destination.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





Voice Commands I 7-11
07
CommandOperation
●RadioPlays the most recent radio channels from
FM, AM, and SiriusXM™.
●FM
Plays FM radio.
●FM
<87.5~107.9>Tunes to FM according to
what you say.
e.g.) FM 87.5: FM eighty seven point five
●SiriusXM Plays SiriusXM™ radio.
●
SiriusXM
Channel
<0~999>Tunes to SiriusXM™ Channel Number> according to what you say.
e.g.) SiriusXM Channel 23: SiriusXM
Channel twenty three
●AM
Plays AM radio.
●AM <530~1710>Tunes to AM according to
what you say.
e.g.) AM 530: AM five thirty
○Preset <1~18> Tunes to your preset stations (1 to 18).
○Channel
<0~999>In SiriusXM™ Radio mode, turns on the
that you say.
Radio Commands
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





7-12 I Voice Recognition
Media Commands
* Check the following before you use media commands.
1. If no media is connected or if no playable files exist at the time when you use these commands, a voice message will tell you
that this is not available.
2. If you say the name of the media that is currently playing again, then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
Command Operation
●MusicContinues the last media you played.
●iPodPlays the iPod currently connected. This
will work the same when an iPhone is con-
nected. If a USB is connected, then it will
be played instead of the iPod.
●USBPlays the music on the USB currently con-
nected.
If an iPod is connected, then the iPod will
be played instead of the USB.
●Bluetooth AudioPlays the music on the Bluetooth phone
currently connected.
This may not be supported depending on
the Bluetooth connection status.
●AUX
Plays external devices that are currently
connected.
●My Music Plays My Music files stored in the system.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





Voice Commands I 7-13
07
1. USB Music/iPod/My Music Command
CommandOperation
○PlayPlays a selected file.
Maintains the current settings during playback.
○PausePauses a file that is playing.
Maintains current settings while paused during
playback.
○ShufflePlays files randomly.
Maintains current settings during shuffled play-
back.
○Shuffle OffCancels Shuffle and plays files sequentially.
Maintains current settings during sequential play-
back.
○RepeatPlays the current file repeatedly.
Maintains the current settings during repeat play-
back.
○Repeat OffCancels Repeat and plays multiple files.
Maintains current settings during multiple file
playback.
2. Bluetooth audio/AUX command
For Bluetooth audio and external devices (AUX), local commands
are unavailable, including Play, Pause, Repeat and Shuffle.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





7-14 I Voice Recognition
Other Commands List
(Commands used in List/Help)
CommandOperation
●HelpMoves to the voice recognition help screen.
All available commands can then be identi-
fied and used.
○Line 1~5
(One~Five)When you cannot select a certain name,
such as in Call History, you can select it
using numbers.
Simple numbers can be recognized, such
as “One” or “Two”.
○Yes/No
When voice recognition is activated, this
command is used when an answer is
requested for a confirmation question.
○Previous Page/
Next PageWhen five or more searched items are
listed, you can move to the previous or next
page using a voice command.
○Manual InputWhen Dial or POI Name search results are
displayed, this command is used to search
manually, rather than to search with a voice
command.
Voice recognition stops after this command
is used.
○Go Back
Moves to the previous screen.
●Exit Ends the voice recognition.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE