2017 Hyundai Ioniq Hybrid Multimedia Manual

Copyright for Brand Icon Copyright for Brand Icon
The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of
such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
Copyright for Junction ViewCopyright for Junction View
Junction View Data provided by ZENRIN USA, INC. Copyright(C) 20XX, All rights Reserved.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

About Map Updates About Map Updates

•
You can contact your Hyundai dealer or call at 1-888-757-0010.
Information Information

•
This product requires regular updates for software corrections, new functions and map updates. Updating may require up to 1 hour
depending on the data size.

•
Turning off the power or ejecting the SD card during the update process may result in data loss. Make sure to keep the ignition on and
wait until updating is complete.

CAUTION
CAUTION

•
Please use only the SD card that was included with the vehicle purchase.

•
The use of a separately purchased SD card may result in damage due to heat related deformation.

•
Product malfunctions caused by the use of separately purchased SD cards shall not be covered within the product warranty.

•
Repeatedly connecting/disconnecting the SD card in a short period of time may cause damage to the device.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

What is Voice Recognition?
Precautions Required for Successful Voice Recognition Starting/Ending and Setting Voice Recognition
Voice Recognition Screen Overview
Voice CommandsSiri Eyes Free
part.7 Voice Recognition
07
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE



)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-2 I Voice Recognition
What is Voice Recognition?
The voice recognition feature operates the
multimedia system by recognizing voice
commands and enables hands-free oper-
ation of the system while you are driving
your car.
Not all possible voice commands are
recognized by the system due to techno-
logical limitations. To make up for these
limitations, the system displays the voice
commands that are available for you to
use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media device (USB or iPod, etc.) is
connected or disconnected
3) The rear view camera is operated
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone used for the voice
recognition system is located in the
headliner directly above the driver's
head. To make your commands better
understood, keep your body straight
in the driver's seat when speaking the
command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any window
or the sun roof is open.
2) High speed blower from the air vents.
Set climate control to blow lower
than level 3.
3) Vibrations from passing through a
tunnel.
4) Vibrations from driving on an uneven
road.
5) Storms and heavy rain.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Starting/Ending and Setting Voice Recognition I 7-3
07
Starting/Ending and Setting
Voice Recognition
Starting Voice Recognition
Press the key briefly (less than 0.8
seconds) on the steering wheel control to
activate voice recognition.
Ending Voice Recognition
1. Select “Exit” to the left of the bottom to end voice recognition.
2. Press and hold (more than 0.8 sec- onds) the
key on the steering
wheel control to end voice recognition.
Combining Voice Recognition
with On-Screen Commands
After pressing the key, say a
command after the beep. The voice rec-
ognition system will execute the desired
operation after understanding the com-
mand. Alternatively, you may touch any
of the corresponding commands on the
screen while the Voice Recognition sys-
tem is in operation.
Combining voice recognition with available
on-screen commands is useful when the
system is taking longer than expected or
the voice command did not execute as
desired.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-4 I Voice Recognition
Extending the Listening Time
When the system is waiting for your com-
mand, after the voice prompt and beep
have been heard, if you press the voice
recognition icon (less than 0.8 seconds),
then the beep will sound again and
standby mode will restart.
When activated, voice recognition waits for
your command for 5 seconds. If you say
nothing for 5 seconds, a voice prompt will
ask for your command again.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE




Starting/Ending and Setting Voice Recognition I 7-5
07
Skipping Prompt Messages
When you hear the prompt, “Please say
a command”, from the system, press the
voice recognition icon on the steering
wheel remote control to skip the message
and go directly to listening mode to say
your command.
This results in faster operation when
you feel the message is too long or you
already know the command to use.
Information
Refer to Part 10 for instructions on how to
change the
Voice Recognition Settings.
Adjusting Voice
Recognition Volume
During voice recognition, rotate the vol-
ume knob to adjust the message volume.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-6 I Voice Recognition
Voice Recognition Screen
Overview
Start Screen
NameDescription
Representative
Commands Displays the repre-
sentative commands.

Not
available
command Displays commands
that are not available
due to a failure in
meeting the condi-
tions for using them
and thus need addi-
tional settings. The
conditions required
for using them will
be described briefly
under each com-
mand.
Name
Description
Voice
recognition
status icons Standby
Voice guidance
Voice command
process

User's
speaking
volume
being
recognized Displays the voice
command volume in
real time.

Recognized
results Displays the voice rec-
ognition result.
Help
Displays all available
help commands in a
tree format.
Exit
Ends the voice recog-
nition.
Help Display
Name
Description
Command
list
•

Shows the available
commands.

•
Select or say a com-
mand to display addi-
tional commands in
detail.
How to
use for
selected
item This section shows how
to use voice recognition
for the selected item.

How to
use in
general This section displays how
to use voice recognition in
general.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE