Starting/Ending and Setting Voice Recognition I 7-5
07
Skipping Prompt Messages
When you hear the prompt, “Please say
a command”, from the system, press the
voice recognition icon on the steering
wheel remote control to skip the message
and go directly to listening mode to say
your command.
This results in faster operation when
you feel the message is too long or you
already know the command to use.
Information
Refer to Part 10 for instructions on how to
change the
Voice Recognition Settings.
Adjusting Voice
Recognition Volume
During voice recognition, rotate the vol-
ume knob to adjust the message volume.
) @ " & ) & 7 @ ( < 6 4 " @ & 6 > " 7 / @ 1 " 3 5 J O E E ) @ " & ) & 7 @ ( < 6 4 " @ & 6 > " 7 / @ 1 " 3 5 J O E E
34
Skipping Prompt
Messages
When you hear the prompt, “Please
say a command,” from the system,
press the voice recognition icon on
the steering wheel remote control
to skip the message and go directly
to listening mode to say your com-
mand.
This results in faster operation when
you feel the message is too long or
you already know the command to
use.
Information
Refer to Part 10 for instructions on
ho
w to change the Voice Recognition
Settings.
Combining Voice
Recognition with On-
Screen Commands
After pressing the key, say
a command after the beep. The
voice recognition system will exe-
cute the desired operation after
understanding the command.
Alternatively, you may touch any of
the corresponding commands on
the screen while the Voice
Recognition system is in operation.
Combining voice recognition with
available on-screen commands is
useful when the system is taking lon-
ger than expected or the voice com-
mand did not execute as desired.
Voice Recognition
) @ " & ) & 7 @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E 7 @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
