2017 CITROEN RELAY sensor

2
contents
3. EASE OF u SE and c
OMFO rt
Lighting control stalk 48
Automatic headlamp
dipping

50
Wiper control stalk


53
Cruise control


54
Speed limiter


60
Demisting and defrosting


64
Heating / Manual air


conditioning

66
Digital air conditioning


68
Additional heating


systems

70
Rear Heating /

Air
Conditioning

70
Programmable additional


heating

72
Front seats


76
Front bench seat


78
Rear seats


79
Front fittings


81
Rear fittings


86
Exterior fittings


89
Mirrors


90
Electric windows


91
Presentation

5
Exterior
6
Interior

7
Instruments and controls


9
T

echnical data -
Maintenance

10
Environment


1

1
Eco-driving

12
1. OVErVIEW 4. tEcHnOLOGY on BOArd
Vehicle configuration 92
T rip computer 98
T
achograph
99
Rear parking sensors


100
Reversing camera


101
Pneumatic suspension


102
2. rEAdY tO GO
Remote control 14
Key 16
Alarm

19
Front

/ rear doors
20
Load space


22
Instrument panels


23
W

arning/indicator lamps
25
Fuel gauge


33
T

emperature indicator
33
T

yre under-inflation
detection

34
Service indicator


36
Gearbox and steering


wheel

38
Gear ef

ficiency indicator
38
Starting and switching of

f
40
Battery standby system


41
Hill start assist


42
Stop & Start


43
Driving recommendations


46
This symbol informs you
of equipment which is
specific to the Combi /
Minibus model. Child lock.Rear heating / air
conditioning / Rear
seats / bench seats.
Reading lamps. Sliding
side windows.

6
ExtErIOr
Reversing camera 101
3rd brake lamp 163, 168
Left-hand side:
Fuel filler cap,

fuel tank
147-148
Fuel cut-of
f
149
AdBlue filler cap,
tank

150-153
T

opping-up the AdBlue
154-155
Load space

86-88
Rear doors

21
Rear lamps, direction indicators, foglamps


48, 163, 167-168
Number plate lamp


168
Rear parking sensors


100
Spare wheel, changing a wheel, jack, tools


170-174
Inflating tyres, pressures


176, 196
Snow chains


137
T

owing, lifting
177
T

owbar
133-134
Removable
towball


178-181 Dimensions

186-190, 20
0-203, 206-207
Accessories
136
Roof rack, roof bars

135
Brakes, pads

142, 144
T

yres, pressures
176, 196
Braking assistance systems


1
05-106
Trajectory control

107-1
10
Pneumatic suspension

102-103Key

, remote control, battery
14-17
Starting

18, 40-42
Central locking

22
Confidential card

18
Alarm
19
Wiper blade
169
Door mirror


90
Side repeater


166
Opening/closing doors


20-22
Remote control


14-15
Autoclose


92, 96
T

emporary puncture
repair kit

175-176
Front lamps, direction indicators,
front foglamps


48, 163-166
Headlamp beam
height adjustment


52
Headlamp wash


53
Changing bulbs


163-166
Location

9
Gearbox 38-39
Parking sensors 100-101Instrument panels, screens,
speedometer
23-24
W
arning lamps, indicator

lamps
25-32
Gauges, indicators

33, 36-37
Gear efficiency indicator

38-39
Lighting controls

48-49
Automatic illumination
of headlamps

49
Automatic headlamp
dipping

50-51
Guide-me-home lighting

49
Parking lamps

52
V
ehicle configuration
92-95
Setting the time


93
Headlamp beam height
adjustment


52
Front/rear fog lamps


48
Pneumatic suspension


102-103
Stop & Start


43-45
Front/rear wipers


53
Screenwash/headlamp wash

53
T
rip computer
98
Starter
, ignition switch
40-41
Hill start

42
Cruise control

54-56, 57-59
Speed limiter


60-62
Fixed speed limiter


63 Instruments and controls


4-5
Steering wheel,
reach adjustment

39
Horn

105
Steering mounted radio
controls

222, 269
Mirrors, electric windows

90-91
Locking the load space


22 Additional heating,

rear air conditioning


70-71
Programmable additional
heating


72-75
1
OVERVIEW
Location

28
Warning/indicator lampisindicates Solution - action
DSC/ASR flashing. it is in operation.
The system optimises traction and allows improved
directional stability of the vehicle.
on,
accompanied
by an audible
signal and a
message in the
screen. a fault with the system or the
hill start assist.
Contact a CITROËN dealer or a qualified workshop.
"Safety - Driving safely" section.
on. a fault with the Intelligent
Traction Control.
Particle filter on. the regeneration of the particle
filter. It is recommended that you leave the engine running
until the warning lamp goes off so that regeneration can
be completed.
"Checks - Levels and checks" section.
Engine
auto-diagnosis on. a fault with the engine or
emission control system. Have the system checked by a CITROËN dealer or a
qualified workshop without delay.
Tyre under-
inflation
detection on.
a tyre deflated or punctured. Park and switch off the ignition.
Change the wheel or repair the tyre.
on,
accompanied
by the service
warning lamp. a faulty sensor.
Have it checked by a CITROËN dealer or a qualified
workshop.
Instruments and controls

34EMISSIOnS cOntrOLS
EOBD (European On Board Diagnosis) is
a diagnostics system which complies with,
among others, the standards on emissions
limits of:
-
CO (carbon monoxide),
-


HC (unburnt hydrocarbons),
-


NOx (nitrogen oxides), detected by

oxygen sensors placed downstream of
the catalytic converters,
-

particles.
tYrE undEr-InFLAt IO n d E t E ct IO n
System which automatically checks the
pressures of the tyres while driving.
The tyre under-inflation detection
system is an aid to driving which does
not replace the need for vigilance on
the part of the driver. This system does not avoid the need
to check the tyre pressures regularly
(including the spare wheel) and before a
long journey.
Driving with under-inflated tyres increases
fuel consumption.
The system continuously monitors the
pressures of the four tyres, as soon as the
vehicle is moving.
A pressure sensor is located in the valve of
each tyre.
The system triggers an alert if a drop in
pressure is detected in one or more tyres. The tyre pressures must be checked
when the tyres cold (vehicle stopped
for 1 hour or after driving for less then
6 miles (10 km) at moderate speed).
Otherwise, add 0.3 bar to the values
indicated on the label.
The tyre pressures for your vehicle can be
found on the tyre pressure label.
The driver is warned of any
malfunction of this emissions
control system by the illumination
of this warning lamp in the
instrument panel.
If this warning lamp comes on, have it
checked by a CITROËN dealer or a qualified
workshop.
To locate it, refer to the "Technical
data
- Identification markings" section.
Driving with under-inflated tyres
adversely affects road holding, extends
braking distances and causes premature
tyre wear, particularly under arduous
conditions (vehicle loaded, high speed, long
journey).
Instruments and controls

35under-inflation alert
The alert is given by the fixed
illumination of this warning lamp,
accompanied by an audible signal,
and depending on equipment, the
display of a message.
In the event of a problem on one of the
tyres, the symbol or the message appears,
according to equipment, to identify it.
-

Reduce speed, avoid sudden steering

movements or harsh brake applications.
-

Stop as soon as it is safe to do so.
-


In the event of a puncture, use the

temporary puncture repair kit or the
spare wheel (according to equipment).
-

In the event of under-inflation:
●


if you have a compressor
, the one
in the temporary puncture repair
kit for example, check the four tyre
pressures when cold,


or
●

if it is not possible to check the

tyre pressures at the time, drive
carefully at reduced speed and go
to the nearest CITROËN dealer or a
qualified workshop. The loss of pressure detected does
not always lead to visible deformation
of the tyre.
Do not rely on just a visual check.
The alert is maintained until the tyre or


tyres concerned is reinflated, repaired
or replaced.
Operating fault
The flashing and then fixed
illumination of this warning lamp
accompanied by the illumination
of the service warning lamp, and
depending on equipment, the display of a
message indicates a fault with the system.
In this case, monitoring of the tyre pressures
is not assured.
This alert is also displayed when one or
more wheels is not fitted with a sensor.
Go to a CITROËN dealer or a qualified
workshop

to have the system checked or,
following the repair of a puncture, to have
the original wheel, equipped with a sensor,
refitted.
2
rEAdY tO GO
Instruments and controls

38
To change gear easily, always depress the
clutch pedal fully.
To prevent the mat from becoming caught
under the pedal:
-
ensure that the mat is positioned

correctly,
-

never fit one mat on top of another
.
Avoid leaving your hand on the gear knob as
the force exerted, even if slight, may wear
the internal components of the gearbox over
time.
MAnuAL GEA r BO x
r

everse gear
Raise the collar under the gear knob to
engage reverse gear. Never engage reverse gear before the
vehicle is completely stationary.
The lever should be moved slowly to reduce
the noise on engaging reverse gear.
If your vehicle is fitted with parking
sensors, the system comes into
operation when reverse gear is engaged; an
audible signal is heard.
Refer to the "Technology on board -
Parking sensors" section.
GEAr EFFIcIEncY IndIcAtO r
Depending on the engine or version, this
system allows fuel consumption to be
reduced by suggesting when to change up.
The gear engagement recommendations should
not be considered to be compulsory. This
because the configuration of the road, the traffic
density and safety remain determining factors
when choosing the best gear. Therefore, the
driver remains responsible for deciding whether
or not to follow the advice given by the system.
The system never recommends engaging
first gear or reverse, or changing down.
Gearbox and steering wheel

49AutOMAtI c ILL u MI n At IO n
Activation
Turn the ring to this position.
Do not cover the sunshine sensor at
the top centre of the windscreen.
GuIdE-ME-HOME LIGHtInG
Ignition off or key in the StOP
position.
Within 2 minutes after switching off the
engine, position the ignition key in the STOP
position or remove it.
Pull the lighting stalk towards the steering
wheel.
t

he indicator lamp comes on in
the instrument panel.
Each action on the lighting stalk,
pulled towards the steering
wheel, prolongs the guide me home
lighting by 30 seconds up to approximately
3
minutes. When this time has elapsed, the
lamps are switched off automatically.
Deactivate this control by keeping the stalk
pulled towards the steering wheel for more
than 2 seconds. If your vehicle is fitted with this function:
when you leave your vehicle, the dipped
beam headlamps remain on for the selected
duration (when leaving a car park for
example).
You can adjust the sensitivity of the
sunshine sensor.
Refer to the "Technology on board -
Vehicle configuration" section.
If your vehicle is fitted with this function, the
dipped beam headlamps are switched on
automatically if the light is poor.
In fog or snow, the sunshine sensor may
detect sufficient light. Therefore, the lamps
will not be switched on automatically. If
necessary, you must switch on the dipped
beam headlamps manually.
They are switched off when the light returns
to a sufficient level.
LEd dAYtIME runnInG LAMPS
On starting the vehicle, in daylight the LED
daytime running lamps come on automatically.
If the sidelamps and headlamps are switched
on manually or automatically, the daytime
running lamps go off.
Programming
For countries where exterior lighting by
day is not a legal requirement, you can
activate or deactivate the function via the
configuration menu.
The lamps are switched off automatically
when the ignition is switched off.
3
EASE OF uSE and cOMFOrt
Steering mounted controls