2017 BMW X1 Owners Manual

Switching
off
the
tilt
alarm
sensor
and
interior
motion
sensor
Press the remote control button again
within 10 seconds as soon as the vehicle
is locked.
The indicator lamp lights up for approx. 2 secj
onds and then continues to flash.
The tilt alarm sensor and interior motion senj
sor are turned off until the vehicle is locked
again.
Switching
off
the
alarm'yUnlock the vehicle with the remote control or switch on the ignition, if needed through
emergency detection of remote control, rej fer to page 37.'yWith Comfort Access:
If you are carrying the remote control on
your person, grasp the door handle on the driver's or front passenger door comj
pletely.
Power
windows
General
information If an accident of a certain severity occurs, thewindows are automatically closed except a
gap.
Safety
information WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of property damage. Make sure
that the area of movement of the windows is
clear during opening and closing.'

Closing'y Pull the switch to the resistance
point.
The window closes while the switch is bej
ing held.'y Pull the switch beyond the resistance
point.
The window closes automatically. Pulling again stops the motion.
Closing by means of Comfort Access, refer topage 39.
Pinch
protection
system
General
information
If closing force exceeds a specific threshold as
a window closes, closing is interrupted.
The window opens slightly.
Safety
information WARNING
Accessories on the windows such as anj
tennas can impact jam protection. There is a risk of injury. Do not install accessories in the
area of movement of the windows.'

WARNING
Unattended children or animals can
cause the vehicle to move and endanger themj selves and traffic, e.g., due to the following acj
tions:'yPressing the Start/Stop button.'yReleasing the parking brake.'yOpening and closing the doors or winj
dows.'yEngaging selector lever position N.'yUsing vehicle equipment.
There is a risk of accidents or injuries. Do not leave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

Comfort
position
If the glass sunroof is not completely opened
automatically, the comfort position has been
attained. In this position the wind noises in the
interior are the least.
If desired, continue the movement by pressing
the switch.
Jam
protection
system
General
information
If the closing force when closing the glass sunj
roof exceeds a certain value, the closing movej ment is stopped, beginning at approximately
the middle of the opening in the roof, or from
the tilted position during closing. The glass
sunroof opens slightly.
Closing
from
the
open
position
without
jam
protection
If there is an external danger, proceed as folj
lows:1.Push the switch forward past the resistj
ance point and hold.
The glass sunroof closes with limited jam protection . If the closing force exceeds aspecific threshold, closing is interrupted.2.Push the switch forward again past the rej
sistance point and hold until the glass sunj
roof closes without jam protection . Make sure that the closing area is clear.
Closing
from
the
raised
position
without
jam
protection
If there is an external danger,
push the switch forward past the
resistance point and hold it.
The glass sunroof closes without jam protecj
tion .
Initializing
after
a
power
interruption
General
information
After a power failure during the opening or closing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized under the followj
ing conditions.'yThe vehicle is parked in a horizontal posij
tion.'yThe engine is running.'yThe external temperature is above
41 

SettingsVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Sitting
safely
An ideal seating position that meets the needs
of the occupants can make a vital contribution to relaxed, fatigue-free driving.
In the event of an accident, the correct seating
position plays an important role. Additionally, observe the following chapters for safe driving:'ySafety belts, refer to page 56.'yHead restraints, refer to page 58.'yAirbags, refer to page 105.
Front
seats
Safety
information WARNING
Seat adjustments while driving can lead
to unexpected movements of the seat. Vehicle
control could be lost. There is a risk of an accij
dent. Only adjust the seat on the driver's side
when the vehicle is stationary.'

Forward/backward
Push switch forward or backward.
Height
Push switch up or down. Seat
tilt
Move switch up or down.
Backrest
tilt
Move switch forward or backward.Thigh
support
Pull the lever at the front of the seat and adjustthe thigh support.
Lumbar
support The curvature of the seat backrest can be adj
justed in a way that it supports the lumbar rej gion of the spine. The lower back and thespine are supported for upright posture.
'yPress the front/rear section
of the switch:
The curvature is increased/
decreased.'yPress the upper/lower secj
tion of the switch:
The curvature is shifted up/ down.
Backrest
width
You can change the width of the backrest usjing the side wings to adjust the lateral support.
Seite 54ControlsSettings54
Online Edition for Part no. 01 40 2 974 556 - X/16

Press button on the correj
sponding side.
Front
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
When ECO PRO is activated, the heater output
is reduced.
Switching
off Press and hold the button, until the
LEDs go out.
Rear
seats
Second
row
of
seats
Safety
information WARNING
There is a risk of jamming when folding
down the center armrest in the rear. There is a
risk of injury. Make sure that the area of movej
ment of the center armrest is clear during foldj
ing down.'

Backrest
tilt
Pull the strap and apply your weight to thebackrest or lift it off, as necessary.
Safety
belts Number
of
safety
belts
The vehicle is fitted with five safety belts to enj
sure occupant safety. However, they can only offer protection when adjusted correctly.
The two outer safety belt buckles of the rear
seat are intended for the persons sitting on the
left and right.
The center safety belt buckles of the rear seat are intended for the persons sitting in the midj
dle.
General
information
Always make sure that safety belts are being
worn by all occupants before driving off. Alj
though airbags enhance safety by providing added protection, they are not a substitute forsafety belts.
Slowly guide the safety belt out of the holder when fastening it.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of evj ery build if the seat is correctly adjusted.
Safety
information
WARNING
If the safety belt is used to buckle more
than one person, the protective effect of the safety belt can no longer be ensured. There is
a risk of injuries or danger to life. Do not allow more than one person to wear a single safety
belt. Infants and children are not allowed on an occupant's lap, but must be transported andsecured in designated child restraint sysj
tems.'