2017 BMW 6 SERIES COUPE Owners Manual

Overview
Tilting
up
and
closing
glass
sunroof
'yPush switch briefly upward.
The closed glass sunroof
tilts and the sliding visor
opens slightly.'yBriefly press out the switch
twice in succession toward
the rear past the resistance
point.
The closed glass sunroof
tilts and the sliding visor
moves all the way back.'yTo close the switch, press upward briefly
or twice forward past the resistance point.
Convenient opening via the remote control, rej
fer to page 35.
Closing by means of Comfort Access, refer to page 39.
Opening/closing
the
sliding
visor
'yPress the switch in the dej
sired direction to the resistj
ance point and hold it there.
The sliding visor moves, as
long as the switch is held
down.'yPress the switch in the desired direction
past the resistance point.
The sliding visor moves automatically.
Pressing the switch upward stops the motion.
Jam
protection
system
General
information
If the closing force exceeds a specific value as
a glass sunroof closes, the closing action is inj
terrupted. The glass sunroof is tilted again.
Closing
without
the
jam
protectionsystem
If there is an external danger orif, for instance icing prevents auj
tomatic closing, push the switch forward past the resistance
point and hold it.
The glass sunroof closes without jam protecj
tion . Make sure that the closing area is clear.
Initializing
after
a
power
interruption General
information After a power failure during the opening orclosing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized under the followj
ing conditions.'yThe vehicle is parked in a horizontal posij
tion.'yThe engine is running.'yThe external temperature is above
41 

SettingsVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Sitting
safely
An ideal seating position that meets the needs
of the occupants can make a vital contribution to relaxed, fatigue-free driving.
In the event of an accident, the correct seating
position plays an important role. Additionally, observe the following chapters for safe driving:'ySafety belts, refer to page 53.'yHead restraints, refer to page 55.'yAirbags, refer to page 107.
Seats
Safety
information WARNING
Seat adjustments while driving can lead
to unexpected movements of the seat. Vehicle
control could be lost. There is a risk of an accij dent. Only adjust the seat on the driver's sidewhen the vehicle is stationary.'

Forward/backward
Push switch forward or backward.
Height
Push switch up or down. Seat
tilt
Move switch up or down.
Backrest
tilt
Move switch forward or backward.Thigh
support
Multifunctional
seat
Push switch forward or backward.
Lumbar
support
The curvature of the seat backrest can be adj
justed in a way that it supports the lumbar rej gion of the spine. The lower back and the
spine are supported for upright posture.
'yPress the front/rear section
of the switch:
The curvature is increased/
decreased.'yPress the upper/lower secj
tion of the switch:
The curvature is shifted up/ down.Seite 51SettingsControls51
Online Edition for Part no. 0140 2 915 411 - X/16

Backrest
widthTo adjust the lateral support, the width of thebackrest can be changed using the side wings.
Press button on the correj
sponding side
Upper
backrest
adjustment
The upper backrest additionally supports the back in the shoulder area:
'yResults in a relaxed seating position.'yReduces strain on the shoulder muscles.
Press button on the corresponding side.
Active
seat
The
concept Active adjustment of the seat cushion's conj
tours reduces muscular tension and fatigue to help prevent lower back pain.
Overview
Press button. The LED lights up.
Front
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
When ECO PRO is activated, the heater output
is reduced.
Switching
off Press and hold the button, until the
LEDs go out.
Seite 52ControlsSettings52
Online Edition for Part no. 0140 2 915 411 - X/16

Temperature
distribution
The heating action in the seat cushion and
backrest can be distributed in different ways.
About iDrive:1."Climate"2."Front seat heating"3.Select desired seat.4.Turn the Controller to set the temperature distribution.
Active
seat
ventilation,
front
The
concept The seat cushion and backrest surfaces are
cooled by means of integrated fans.
The ventilation cools the seat, e.g., if the vehij
cle interior is overheated or for continuous cooling at high temperatures.
Overview
Active seat ventilation
Switching
on Press button once for each ventilation
level.
The highest level is active when three LEDs are lit.
The ventilation switches back by one level afj ter a short time.
Switching
off
Press and hold the button, until the
LEDs go out.
Safety
belts Number
of
safety
belts
The vehicle is fitted with four safety belts to ensure occupant safety. However, they can
only offer protection when adjusted correctly.
General
information
Always make sure that safety belts are being
worn by all occupants before driving off. Alj
though airbags enhance safety by providing
added protection, they are not a substitute for
safety belts.
Slowly guide the safety belt out of the holder when fastening it.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of evj
ery build if the seat is correctly adjusted.
Safety
information WARNING
If the safety belt is used to buckle more
than one person, the protective effect of the safety belt can no longer be ensured. There is
a risk of injuries or danger to life. Do not allow more than one person to wear a single safety
belt. Infants and children are not allowed on an occupant's lap, but must be transported andsecured in designated child restraint sysj
tems.'

danger to life. Make sure that all occupants are
wearing safety belts correctly.'

If the belt tension does not loosen automatij
cally, stop the vehicle and unbuckle the safety belt using the red button in the buckle. Fasten
the safety belt before continuing on your trip.
Front
headrests
Safety
information WARNING
A missing protective effect due to rej
moved or not correctly adjusted head rej
straints can cause injuries in the head and neck area. There is a risk of injury. Before drivj
ing, install the head restraints on the occupied seats. Ensure that the middle of the head rej
straint supports the back of the head approxij
mately at eye level.'

Distance
to
the
back
of
the
head'yForward: pull the head restraint toward the
front.'yBack: press the button and push the head restraint toward the rear.
Adjusting
the
side
extensions
Fold the side extensions on the head restraint
forward for increased lateral support in the resting position.
Removing
The head restraints cannot be removed.
Entering
the
rear Safety
information WARNING
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of
property damage. Make sure that the area of movement of the seat is clear prior to any adjjustment.'