2017 BMW 6 SERIES COUPE Owners Manual

Time
of
arrivalDepending on the vehicle equipj
ment, the estimated time of arj
rival is displayed if a destination is entered in the navigation sysj
tem before the trip is started.
The time must be correctly set.
Speed
Limit
Info
Further information, see chapter Speed Limit
Info.
Onboard
computer
on
the
Control
Display
Concept
The onboard computer displays different vehij
cle data on the Control Display, such as averj
age values.
General
information The vehicle features two types of onboard
computers.'y"Onboard info": average values, such as
the fuel consumption, are displayed. The values can be reset individually.'y"Trip computer": the values deliver an
overview of a certain distance and can be reset as often as necessary.
Calling
up
the
onboard
computer
or
trip
computer
Using iDrive:
1."Vehicle info"2."Onboard info" or "Trip computer"
Resetting
the
onboard
computer Using iDrive:
1."Vehicle info"2."Onboard info"3."Consumpt." or "Speed"4."Yes"
Resetting
the
trip
computer Using iDrive:
1."Vehicle info"2."Trip computer"3."Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle has come to a standstill.
Sport
displays
General
information
On the Control Display, the current values for performance and torque can be displayed ifthe vehicle is appropriately equipped.
Displaying
sport
displays
Using iDrive:
1."Vehicle info"2."Sport displays"
Speed
warning
Concept
A speed limit can be set that when reached will cause a warning to be issued.
General
information
The warning is repeated if the vehicle speed drops below the set speed limit once by atleast 3 mph/5 km/h.
Seite 97DisplaysControls97
Online Edition for Part no. 0140 2 915 411 - X/16

Displaying,
setting
or
changing
the
speed
warning
Using iDrive:1."Settings"2."Speed"3."Warning at:"4.Turn the controller until the desired speed is displayed.5.Press the controller.
Activating/deactivating
the
speed
warning
Using iDrive:
1."Settings"2."Speed"3."Warning"4.Press the controller.
Setting
your
current
speed
as
the
speed
warning
Using iDrive:
1."Settings"2."Speed"3."Select current speed"4.Press the controller.
Settings
on
the
Control
Display
Time
Setting
the
time
zone
1."Settings"2."Time/Date"3."Time zone:"4.Select the desired time zone.
The time zone is stored.
Setting
the
time1."Settings"2."Time/Date"3."Time:"4.Turn the controller until the desired hours are displayed.5.Press the controller.6.Turn the controller until the desired mijnutes are displayed.7.Press the controller.
The time is stored.
Setting
the
time
format
1."Settings"2."Time/Date"3."Format:"4.Select the desired format.
The time format is stored.
Automatic
time
setting Depending on your vehicle's optional features,
the time, date and, if needed, the time zone are
updated automatically.
1."Settings"2."Time/Date"3."Auto time set"
Date
Setting
the
date
1."Settings"2."Time/Date"3."Date:"4.Turn the controller until the desired day is
displayed.5.Press the controller.6.Make the necessary settings for the month
and year.
The date is stored.
Seite 98ControlsDisplays98
Online Edition for Part no. 0140 2 915 411 - X/16

Setting
the
date
format1."Settings"2."Time/Date"3."Format:"4.Select the desired format.
The date format is stored.
Language
Setting
the
language
1."Settings"2."Language/Units"3."Language:"4.Select the desired language.
Settings are stored for the profile currently used.
Setting
the
voice
dialog
Voice dialog for the voice activation system,
refer to page 27.
Units
of
measurement
Setting
the
units
of
measurement To set the units for fuel consumption, route/
distance and temperature:
1."Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired unit.
Settings are stored for the profile currently used.
Brightness
Setting
the
brightness To set the brightness of the Control Display:
1."Settings"2."Control display"3."Brightness"4.Turn the controller until the desired brightjness is set.5.Press the controller.
Settings are stored for the profile currentlyused.
Depending on the light conditions, the brightj
ness settings may not be clearly visible.
Activating/deactivating
the
display
of
the
current
vehicle
position
If GPS geolocation has been activated, the curj
rent vehicle position can be displayed in the BMW ConnectedDrive app or in the ConnecjtedDrive customer portal.
Using iDrive:
1."Settings"2."GPS tracking"3."GPS tracking"
Head-up
Display
Concept
This system projects important information
into the driver's field of vision, e.g., the speed.
The driver can get information without averting
his or her eyes from the road.
Overview
Seite 99DisplaysControls99
Online Edition for Part no. 0140 2 915 411 - X/16

Switching
on/off
Press button.
Display
Overview
The following information is displayed on the Head-up Display:
'ySpeed.'yNavigation system.'yCheck Control messages.'ySelection list from the instrument cluster.'yDriver assistance systems.
Some of this information is only displayed briefly as needed.
Selecting
displays
in
the
Head-up
Display
Using iDrive:
1."Settings"2."Head-Up Display"3."Displayed information"4.Select the desired displays in the Head-up Display.
Settings are stored for the profile currentlyused.
Setting
the
brightness The brightness is automatically adjusted to the
ambient brightness.
The basic setting can be adjusted.
Using iDrive:1."Settings"2."Head-Up Display"3."Brightness"4.Turn the controller until the desired brightj ness is set.5.Press the controller.
When the low beams are activated, the brightjness of the Head-up Display can be additionj
ally influenced using the instrument lighting.
Settings are stored for the profile currently used.
Adjusting
the
height
Using iDrive:
1."Settings"2."Head-Up Display"3."Height"4.Turn the controller until the desired height is reached.5.Press the controller.
Settings are stored for the profile currentlyused.
Setting
the
rotation
The screen of the Head-up Display can be roj
tated around its own axis.
Using iDrive:
1."Settings"2."Head-Up Display"3."Rotation"4.Turn the controller until the desired setting
is selected.5.Press the controller.
Settings are stored for the profile currently used.
Seite 100ControlsDisplays100
Online Edition for Part no. 0140 2 915 411 - X/16

Display
visibilityThe visibility of the displays in the Head-up
Display is influenced by the following factors:'yCertain sitting positions.'yObjects on the cover of the Head-up Disj
play.'ySunglasses with certain polarization filters.'yWet roads.'yUnfavorable light conditions.
If the image is distorted, have the basic setj tings checked by a dealerss service center or
another qualified service center or repair shop.
Follow the instructions for cleaning the Head- up Display, refer to page 247.
Special
windshield The windshield is part of the system.
The shape of the windshield makes it possible
to display a precise image.
A film in the windshield prevents double imj
ages from being displayed.
For this reason, it is strongly suggested to have the special windshield replaced by a dealj
erss service center or another qualified service
center or repair shop, if necessary.
Seite 101DisplaysControls101
Online Edition for Part no. 0140 2 915 411 - X/16

LightsVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Overview Switches
in
the
vehicle
The light switch element is located next to the
steering wheel.
SymbolFunctionFront fog lightsAutomatic headlight control
Adaptive Light ControlLights off
Daytime running lightsParking lightsSymbolFunctionLow beamsInstrument lighting
Parking
lights,
cornering
lights
and
roadside
parking
lights
General
information Position of switch:
, ,
The exterior lighting is automatically switched off at these switch settings if the driver's dooris opened when the ignition is switched off.
Parking
lights Position of switch:

The vehicle is illuminated on all sides.
Do not use the parking lights for extended pej
riods; otherwise, they might drain the battery
and it would then be impossible to start the enj
gine.
When parking, switch on the one-sided roadj
side parking lamp, refer to page 102.
Low
beams Position of switch:

The low beams light up when the ignition is
switched on.
Roadside
parking
lights
Concept
The vehicle can be illuminated on one side.
Seite 102ControlsLights102
Online Edition for Part no. 0140 2 915 411 - X/16

Switching
on
With the ignition switched off, press the lever
either up or down past the resistance point for approx. 2 seconds.
Switching
off Briefly press the lever to the resistance point in
the opposite direction.
Welcome
lights
and
headlamp
courtesy
delay
feature
Welcome
lights
General
information Depending on the equipment, when switching
off the vehicle, switch position
or .
Depending on the ambient brightness, individj
ual light functions may be switched on briefly, when the vehicle is unlocked.
Activating/deactivating
Using iDrive:
1."Settings"2."Lighting"3."Welcome lights"
Settings are stored for the profile currently used.
Headlamp
courtesy
delay
feature
General
information
The low beams stay lit for a short while after
the radio-ready state is switched off if the
lights are turned off and the headlight flasher is switched on.
Setting
the
duration Using iDrive:1."Settings"2."Lighting"3."Pathway lighting:"4.Set length of time.
The setting is stored for the driver profile curj
rently used.
Automatic
headlight
control Concept
The low beams are switched on and off autoj matically depending on the ambient brightj
ness, for instance in tunnels, in twilight or if there is precipitation.
General
information
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
When emerging from a tunnel during the day,
the low beams are not switched off immedij
ately but instead only after approx. 2 minutes.
The low beams always stay on when the fog
light is switched on.
Activating Position of switch:

The indicator light in the instrument cluster is
illuminated when the low beams are switched
on.
Seite 103LightsControls103
Online Edition for Part no. 0140 2 915 411 - X/16

System
limits
The automatic headlight control cannot serve
as a substitute for your personal judgment of
lighting conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks unj
der these conditions, you should always switch
on the lights manually.
Daytime
running
lights
General
information Position of switch:
, ,
The daytime running lights light up when the
ignition is switched on. After the ignition is
switched off, the parking lights light up in posij
tion
.
Activating/deactivating In some countries, daytime running lights are
mandatory, so it may not be possible to deactij
vate the daytime running lights.
Using iDrive:
1."Settings"2."Lighting"3."Daytime running lamps"
The setting is stored for the driver profile curj
rently used.
Adaptive
Light
Control The
conceptAdaptive Light Control is a variable headlight
control system that enables dynamic illuminaj
tion of the road surface.
General
information
Depending on the steering angle and other paj
rameters, the light from the headlight follows the course of the road.
To avoid blinding oncoming traffic, the Adapj
tive Light Control does not swivel to the drivj er's side when the vehicle is at a standstill.
Depending on the equipment version, Adapj
tive Light Control consists of one or several systems:'yCornering light, refer to page 104.
Activating
Position of switch
with the ignition
switched on.
Cornering
light
In tight curves, for instance on mountainous
roads or when turning, a cornering light is switched on up to a certain speed. As a resultthe inside of the curve is better lighted.
The cornering light is automatically switched
on depending on the steering angle or the use
of turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless of the steering angle.
Malfunction
A Check Control message is displayed.
Adaptive Light Control is malfunctioning or has
failed. Have the system immediately checked
by a dealerss service center or another qualij
fied service center or repair shop.
Self-leveling
headlights
The self-leveling headlights compensate for
acceleration and braking operations in order not to blind the oncoming traffic and to achieveoptimum illumination of the roadway.
Seite 104ControlsLights104
Online Edition for Part no. 0140 2 915 411 - X/16