2017 AUDI Q3 wheel bolt torque

a:,
a:,
...... N r--. N .-< 0 0 ::, a:,
Emergency assistance
General information
.. Park the vehicle as far as poss ible from moving
traffic in the event of a breakdown. In the event
of a flat tire, park the vehicle on a leve l surface .
It you are on a steep h ill, be especially careful.
.. Set the parking brake .
.. Switch the emergency flashe rs on .
.. Put on a reflective vest .
.. Set up the warn ing triang le, if available .
.. Have the passengers exi t the veh icle. They
sho uld move to a safe place, for example be­
hind a guard rail.
_& WARNING
Follow the steps given above. This is for your
protection and the for the safety of other d riv ­
ers.
_& WARNING
Improper use of the vehicle jack can cause se ­
rious personal injuries .
- Never use the screw driver hex head to
t ighten whee l bolts, since the bolts cannot
attain the necessary tighten ing torque if you
use the hex head, potentially causing an ac­
c ident .
- The factory-supplied jack is intended only
for your vehicle model. Under no circum­
stances should it be used to lift heavy
vehicles o r other loads; yo u ris k inju ring
yo urself.
- Never start the engine when the vehicle is
ra ised, which could cause a n accident.
- Support the veh icle secure ly with app ropr i­
a te s tan ds if wor k is to be performed under­
neath t he vehicle; otherwise, the re is a po­
tent ial ris k for i njur y.
- Never use the jack s upplied with yo ur Audi
on another vehicle, pa rtic ularly o n a heav ie r
one. The jack is only suitable for u se on the
vehicle it came wit h.
Emergen cy a ssis tanc e
Equipment
Vehicle tool kit
Fig. 151 Lu gg age compartmen t: cargo floo r cove r fo lded
u pwa rd
T he veh icle tool k it is located in the luggage com­
partment under the cargo floor cover.
.. Push on the p lastic handle and lift up the cargo
floor .
.. Open the cargo floor.
Completely retract the veh icle jack a rm before
stor ing the ve hicle jack*.
_& WARNING
- Never use the screw driver hex head to
tighten wheel bo lts, since the bolts cannot
attain the necessary tightening torque if yo u
use the hex head, potentially causing an ac­
cident.
- The factory-supp lied jack is intended only
for your ve hicle model. Under no circum­
stances shou ld it be used to lift heavy
veh icles or other loads; you risk injuring
yourse lf.
- Never start the engine when the ve hicle is
raised, which could cause an accident.
- Support the vehicle securely with appropri­
ate stands if wo rk is to be performed under­
neath the vehicle; otherwise, there is a po­
tential risk fo r injury .
@ Tips
The vehicle jack * in your vehicle is mainte­
nance-free.
197

a:,
a:,
...... N r--. N .... 0 0 ::, a:,
Changing a wheel
When you change a wheel, follow the sequence
described below step-by-step and in exactly that
order.
1. Remove the deco rative wheel co ve r* or the
whee l bolt cap s*. For more deta ils see also
c:> page 199.
2. Loosen the whee l bolt s c:> page 200.
3. Lo cate the proper mounting point for the
jack and align the jack below tha t point
<::> page 200.
4. Lift the car with the jack c:> page 200 .
5. Remove the wheel with the fl at tire and then
install the
s pare t ire c:> page 201 .
6. Tighten all wheel bolts lightly.
7 .
Low er the veh icle w ith the jack.
8 . Use the wheel bolt wrench and
firmly tighten
all wheel bolts in a crisscross pattern
c:> page 200.
9 . Replace the decorative wheel cover* o r the
whe el bolt cap s*.
_& WARNING
Always read and fo llow all WARNINGS and in­
formation
c:> .&. in Raising the vehicle on
page
201 and c:> page 202.
After changing a wheel
A wheel change is not complete without the do­
ing the following .
.. Always store the vehicle tool k it, the jack* and
the replaced t ire in the luggage compartmen t
c:>page 105.
.. Ch eck the tire pre ss ure of the spare tir e as soon
as possib le.
.. As soon as possible , have the
tighten ing tor ­
qu es
on all wheel bolts checked with a torque
wrench . The correct tightening torque is
105 ft lbs (140 Nm) .
.. Have the flat tire
replaced as soon as possible.
@ Tips
- If you notice that the wheel bolts are cor­
roded and diffic ult to turn wh ile changing a
Em ergen cy a ssis tanc e
tire, they shou ld be replaced before you
check the tightening torque .
- Drive at reduced speed until yo u have the
tightening torques checked.
Removing the wheel covers/bolt caps
Fig . 153 Cha ng in g a w hee l: r emov ing t he w hee l cover
Fi g. 1 54 Cha ng in g a whee l: remov ing the w hee l bol t cap s
Wheel cover*
.. Insert the hoo k provided w ith the vehicle tool
ki t in the hole in the hub
<::> fig . 153.
.. Pull off the decorati ve wheel cover .
Wheel bolt caps*
.. Push the plast ic clip provided with the vehicle
too l kit over the wheel bolt cap until it engages
c:> fig. 154 .
.. Pull on the pla sti c clip to remove the cap .
199

Emergency assistance
After you have loosened a ll wheel bo lts and
raised the vehicle off the ground, remove and re­
p lace the whee l as fo llows:
Removing the wheel
.,. Remove the topmost wheel bol t comp letely
with the
he xagonal socket in t he screwd river
hand le (vehicle tool kit)
¢ fig. 158 and set it
aside on a
clean s ur face.
.,. Screw the threaded end of the
alignment pin
from the tool k it hand-tight into the empty bolt
hole¢
fig. 159 .
.,. The n remove the other wheel bolts as described
above.
.,. Take off the wheel leav ing the a lignment pin in
the bo lt hole ¢ 0.
Putting on the spare tire
.,. Push the spare tire over the alig nment pin
¢ (D .
.,. Screw on the wheel bo lts and tighten them
slightly using the hex agonal socke t.
.,. Remove the a lignment pi n an d in se rt an d tight­
en t he rem aining wheel bol t slightly like the
res t.
.,. Turn the jack handle counter-clockwise to lower
the ve hicle until the jack is fully re leased .
.,. Use the wheel bolt wrench to tighten all wheel
bolts firmly. Tighten them
in a crisscross pat­
tern,
from one bol t to the (app roximately) op­
pos ite one, to keep the whee l cente red .
.,. Perfo rm the steps req uire d afte r changing the
whee l ¢
page 199, After changing a wheel.
&, WARNING
Do not us e the he xagon al so cke t in t he screw ­
dr iver han dle to tig hten the wheel bol ts . I t is
not poss ib le to tighten t he bo lts to the re­
quired torque usin g t he he xagonal socket -
r is k of accident!
(D Note
W hen removi ng or inst alling the whee l, the
r im cou ld hit the brake roto r and dama ge t he
rotor . Work ca ref ull y and have a seco nd per­
son to help you.
202
(D Tips
- When mo unting tires with unidirectional
tread design
make sure the trea d pattern is
pointed the right way¢
page 202.
-The wheel bolts s hould be clean an d easy to
t u rn. Check fo r dirt and corrosion on the
matin g surfaces of both the wheel and the
hub. Remove all dirt from these s urfaces be­
fore remounting the whee l.
Tires with unidirectional tread design
Tires with unidirectional tread design mus t be
mounted with their tread pattern pointed in the
right direction .
Using a spare tire with a tread pattern
intended for use in a specific direction
When using a s pare tire w ith a t read patter n in ­
te nded for use in a specif ic direct ion, please note
t h e followi ng :
- The d irection of rotation is marked by an
arrow
on the side of the tire .
-If the spare tire has to be installed in the incor­
rect direction, use the spare tire on ly tempora­
r il y since the tire will not be able to ac hieve its
op timum performa nce characterist ics w ith re­
gard to aquap la ni ng, no ise a nd wear.
- W e recommend that you pay part icu lar atten­
t ion to th is fact d urin g we t wea ther an d that
you a djust your spee d to matc h road cond i­
tion s.
- Rep lace the flat tire w it h a new one an d have it
inst alled o n your ve hicle as soon as possib le to
res tore the h andlin g advan tage s of a unidir ec­
tional tire .
Notes on wheel changing
Please read t he informat ion ¢ pa ge 17 8, New
tires or wheels
if yo u ar e go ing to use a spare tire
which is d ifferent from the t ires o n your ve hicle.
A ft er yo u ch an ge a tire:
- Check the tire pressure on the spare immedi-
ately after installation. .,.

a:,
a:,
.... N r--. N .... 0 0 ::, a:,
-Ha ve the wheel b olt tightening torque
ch ecked wit h a to rque wr ench a s soon a s po s­
s ible b y your auth orized Audi dealer or qu ali·
fied works hop.
- With steel and allo y wheel rims , the wheel
bolts a re correctl y tight ened at a to rque of
105
ft lbs (140 Nm ).
- If you n oti ce th at the wheel bolts are cor roded
a nd d iff icult to tu rn w hile c hang ing a t ire ,
they should be replaced be fore you check th e
t ighte nin g torqu e.
- Repla ce the flat t ire with a new one and h ave
i t insta lled on you r veh icle as so on a s possi­
ble . Remo unt the whee l co ver .
Until then, d riv e with extra ca re and at redu ced
spee ds.
A WARNING
- If you are going to equ ip your vehicle w ith
t ir es or rims which differ from those which
were factory installed, then be sure to read
the informat io n
¢ page 178, N ew tires or
wheels.
- Always make sure the damaged wheel or
even a flat tire and the jack and tool kit a re
properly secured in the luggage compart ­
ment and are not loose in the passenger
compartmen t.
- In an accident o r sudden maneuver they
cou ld fly forward, injuring anyone in the ve ­
hicle.
- Always store damaged whee l, ja ck a nd too ls
sec urely in the luggage compartment . Oth ­
erwise, in an accident or sudden maneuver
they could fly forward, ca using injury to pas­
sengers in the vehicle .
(D Note
Do not use commercia lly available tire seal­
ants . Otherwise, the electrical components of
the t ire pressure monitoring system* will no
longer work properly and the sensor for the
tire pressure mon itor ing system" will have to
be replaced by qualified workshop.
.
Em ergen cy a ssis tanc e
Spare tire
Space-saving spare tire (compact spare
tire)
Applies to: veh icles with spare tir e/space-saving spare tire
(compact spare tire)
F ig. 160 Lugg age compar tme nt: space -s a ving s pare tire
( c ompact spa re
tir e)
The spare tire is intended fo r sh ort -term use on­
ly. Have the damaged tire checked and replaced ,
i f necessary, by an authorized Aud i dea ler or au­
thorized Aud i Service Facility as soon as possible.
T here are some restr ictions on the use of the
compact spare tire . The compac t spa re t ire has
been designed specifically for your type of vehi­
cle . Do not rep lac e it with the spare tire from an­
other type of vehicle .
Removing the spare tire
.,. Remove the cargo floo r.
.,. Remove the w ing bo lt
¢ fig. 160 an d then re-
move the retaine r underneath it .
.,. Remov e the subwoofer*
¢ page 204.
.,. Remov e the spar e tir e.
Snow chains
For technical reasons, the use of snow chains on
the compact spare tire is not pe rmitted .
If you have to drive with snow chains and a front
tire fails , mo unt the spare wheel in place of a
rear tire. Install the snow chains o n the rear t ire
that you removed, and install that in place of the
front t ire that fai led .
A WARNING
-Never use the spare tire if it is damaged or if
it is worn down to the tread wear indicators . .,.
203