co
co
....
Instruments and indicator lights
Instruments and indicator lights
Instruments
Instrument cluster overview
The instrument cluster is the central information center for the driver.
Fig . 3 Instru ment cl uste r overview
CD Engine coolant temperature gauge
@ Tachometer ...... .... ...... . .
- With
OFF status indicator . .. . .
- With
READY status ind icator ..
@ Turn signals ...... .... ....... .
© Dis p lay w ith
- Drive r information system . .. . .
- Indicator lig hts ..... .. . .. .. .
® Speedometer
® Fuel level
(D Tips
9
1 0
69
69, 7 1
41
21
10
10
The instrument illumination for the needles
and d ia ls t urns on when the ignition is turned
on and the lights are turned off. The ill umina
t ion fo r the g auges reduces aut omat ically and
eve ntu ally t urns off as brigh tness outside in
creases . This f unction reminds the drive r to
tur n the low beams on at the approp riate
time.
Coolant temperature indicator
ed o n. To prevent engine damage, please observe
t h e following notes about the temperature rang
es.
Cold range
If only the LEDs at the bottom of the gauge t urn
on, the engine has not reached operating tem
perature yet. Avoid high eng ine speeds, full ac
ce le rating and heavy e ngine loads.
Normal range
T he eng ine has reached its operating tempera
ture once the L EDs up to the center of the gauge
turn on.
If the. indicator light in the inst ru
ment cluster d isp lay turns on, the coolant tem
perature is too high¢
page 14.
(D Note
-Aux iliary headlig hts and ot her accessories in
front of the coo ling-air intake impa ir th e
cooling effect o f th e coolant . This increases
t he risk of th e engi ne overheating dur ing
hig h ou tsid e tempera tures and heavy en
gine load.
~ The coolant temperature display CD¢ page 9,
~ fig. 3 only functions w hen the ignition is switch-
<..:> 'SI"
9
Other indicator lights
--------------
Tu rn signa ls
c:>page 19
USA models:
cruise control system
c:> pageBS
Canada models :
cruise con trol system
c:>page BS
Adaptive cruise control*
c:> page 91
Adaptive cruise control*
c:>page 91
Adaptive cr uise control *
c:>page 91
Active lane assist*
c:> page97
Start/S top system *
c:>page 71
Start/S top system*
c:>page 71
High beam assistant*
c:> page 41
High beams
c:> page41
BRAKE /(0) Brake system
If th is ind icator lig ht tu rns on, there is a ma lfunc
tion in the brake system.
1111 ( USA models ) / . (Canada models ) Stop
vehicle and check brake fluid level.
St op the veh icle and che ck the bra ke f lu id leve l.
See an au tho riz e d Au di dea ler o r aut ho riz e d Aud i
Service Fac ility for assistance if necessa ry .
1111 (USA models ) /. (Canada models )
Brake s: malfunction! Please stop vehicle safely
If the ABS indica to r light ~ (U SA mode ls) /
~ ¢ej (Canada models), the ESC indica to r li ght Gl
~ an d the brake system in dicator light 1111 (USA
8 models) /. (Canada mode ls) all tur n on and
00 \.J '
t hi s message appears, then the ABS, ESC an d
bra king distribution a re ma lfunctioning
c:> ,&. .
Do no t continue dr iv ing . See a n author ized Audi
dealer or au thor ized A udi Se rvice Fa cility for as
s istance
c:> &. .
1111 (USA models). (Canada models) Park
ing brake: System fault! See owner' s manual
- If the ind icator lig ht and the message appea r
when the vehicle is stationary or after switch
ing the ignition on ,
check if yo u can re lease the
pa rk ing br ake. If you canno t relea se t he p ark
ing b rake, see your au thor ized A udi de aler or
author ized A udi Se rvice Facility . If you can re
lease the parking brake and the message sti ll
appears, see an authorized Audi dea ler or au
thorized A udi Service Fac ility immediately to
have the ma lfunction co rrected.
- If the ind icator light and message appear
while
driving ,
the hill start ass ist or emergency brak
ing function may be ma lfunctioning. It may not
be possible to set the parki ng brake or release
it o nce it has been set. Do no t park yo ur vehicle
on hills , See an aut ho rized Audi dea le r or au
t hor ized A udi Se rvi ce Fa ci lity for assistan ce.
Applies to: USA models
If the 1111 and EiJ tur n on a t the same time, the
bra ke pads are wo rn o ut
c:>page 17.
_& WARNING
-Read and fo llow the w arning s in
c:> page 199, W orking in the engine com
partment
before o pening the hoo d and
checking the brake fluid level.
- If the b rake syst em i ndi cat or li ght does not
turn off or i t turns on wh ile driving, the
b rake fl uid level in the reservo ir is too low,
an d this increases the risk of an accident.
Stop the vehicle and do not contin ue d riv
ing. See an autho rized Aud i deale r or au
thor ized A udi Se rvice Facility for assistance.
- If the b rake system indicator light turns on
together with the ABS and ESC indicato r
lights, the ABS/ESC regu lating fu nction may
be malf unct ion ing . Funct io ns that stabilize
th e vehicle are no longe r av ailabl e. This
could c ause the vehicle to swerve, whi ch
13
Service Faci lity i f th e battery charge level is too
l ow .
(•) Low battery charge : Battery will be charged
while driving
The start ing ability may be impaired .
If th is message turns
off after a litt le while, the
ve hicle battery charged enough wh ile driving.
If the message does not turn
off, h ave an a uthor
ized A udi dealer o r autho rized Audi Serv ice Fac ili
ty repa ir th e malfunct ion.
~ Engine stop while driving
• Engine stopped: No power steering and
brake support .
There is a malfunction in the eng ine or in the fuel
supp ly system.
M ore fo rce is needed to steer and brake the mov
ing ve hicle w hen t he engine is stoppe d. If the ve
hi cle is rol ling, try to b ring it to a stop
off to the
side from moving traffic. See an aut ho rized Aud i
dealer or aut ho riz ed Aud i Serv ic e Faci lity fo r as
sis tanc e.
A WARNING
-
If the e ng in e stops while d riving, yo u will
nee d to use more force to brak e the vehicle.
T hi s i ncrease s the r is k of an a ccid ent. Th ere
w ill still be power s teerin g if th e i gnit ion is
switched on w hil e the vehicle is rolling an d
there is sufficient battery c har ge. Othe rw ise,
you must use greate r force when steer ing.
~ Engine oil pressure
• Turn off engine and check oil level
Stop the eng ine and do not continue driving .
Chec k the engine oil leve l
Q page 204.
-If the engi ne oil leve l is to o low, add engine oil
Qpoge 204. O nl y con tinue driv ing once the in
dicato r light turns
off.
co ~ - If the engi ne oil leve l is co rr ec t an d t he i ndic a-
~ to r lig ht st ill tur ns on, tur n the eng ine off and N
8 do not con tinue driving . See an auth o rized Aud i 00 \.J '
dea ler o r auth orized Audi Service Facili ty fo r as
sistance .
(D Tips
The oil pres sure w arnin g is no t an oil leve l in
d ic ator. Always check the oil level regula rly.
't::r;. Engine oil level
• Please add oil immediately.
Add o il imme diate ly Qpoge 202.
Ill Add oil max. x qt (l). You may continue driv
ing
Add t he d isplayed amount of oil immediately
Q page202.
~- Steering lock
• Do not drive vehicle: Steering defective
There is a ma lfunction in the e lectron ic steering
l ock . You cannot tur n the ign ition on .
Do
not tow yo ur vehicle because it cannot be
stee red. See an a uthorized Audi dea ler or author
ized Audi Service Facility for ass istance.
!II Steering lock : System fault Please contact
dealer
T he re is a m alfu n ct ion in the e le ctro nic st eering
l ock .
Dr ive to a n au thori zed A udi dealer or au tho riz ed
A udi Se rvice Faci lity i mmed iate ly to h ave the
m alfu nction correc te d .
A WARNING
-
Do not tow yo ur vehicle when there is a m al
f u nction in t he electron ic steer ing lock - t his
i nc reases t he risk of an acc ident.
© -Engine start system
• Engine start system fault . Please contact
dealer
Do not switch the ignition off because you may
not be able to switch it on again . .,.
15
Instruments and indicator lights
Drive to an autho rized Aud i dea ler or a uth orized
Aud i Service Facility immediately to have t he
malfunct ion corrected .
Ill Engine start sy stem fault . Plea se contact
dealer
There is a malfunction in the eng ine start ing sys
tem.
Dr ive to an authorized Aud i deale r or authorized
Aud i Serv ice Facility immediately to have the
malfunct io n corrected.
0 Air suspension
• Air su spen sion : Sy stem fault Driving slowly
at maximum 35 mph is pos sible.
There is a malfunction that can result i n restrict
ed driving stabili ty.
Drive to an autho rized Aud i dea ler or authorized
Aud i Serv ice Facility immediately at a maximum
speed of 3S mph (60 km/ h) to have the ma lf u nc
tion cor rec ted .
• Air suspension : Service mode . Vehicle can
only be moved with restrictions
Carefully drive to your author iz ed Audi dealer or
author ized Audi Service Facility immed iate ly to
have the serv ice mode deactivated.
rl Air suspension : System fault
T here is a system malfunct io n that ca n result in
restricted driving stability o r reduced ground
clearance .
Dr ive to an a uth o rized Aud i de aler or auth o rized
Aud i Serv ice Facility immediately to have t he
malfunction corrected .
rl Air sus pension : Vehicle is too low. Ground
clearance limited
The ground clearance is very low due to a system malfunct io n. Wa it until the air suspens ion sys
tem has restored norma l grou nd clearance. Oth
erw ise, condi tions such as an uneven road s urfa ce
can lead to vehicle damage.
16
Lt Brake booster
d Brake servo : limited functionality . You can
continue driving . Conta ct work shop
There is a ma lfunction in the brake booster. The
brake booste r is ava ilab le, but its effectiveness is
r educed. Bra kin g behavior may be different from
h ow it norm ally f un cti ons and the br ake peda l
may vibrate .
D rive to an au thorized A udi dealer or autho rized
Audi Se rvice Fa cil ity immed iate ly to have the
malfunction cor rec ted .
;;,/!:; Electronic Stabilization Control (ESC)
If the bl ind icator light blinks while driving, the
ESC or ASR (Anti-Slip Regulation) is active ly regu
l ating .
I f the
bl ind ic a tor light turns on, the system has
swi tched t he ESC off. In t his case, yo u can switch
the ignition off and then on to switch the ESC on again. The indicator light t urns off when the sys
tem is functioning fully .
I f the
II ind icator light turns on, ESC was
switched off using the
I~ O FFI button
¢ page 120 .
Stabilization control (ESC / ABS) malfun ction!
See owner's manual
I f the GJ ind icator light and t he A BS i ndica to r
li gh t
rJ]J (U SA mode ls) I riJ (C an ada models)
tu rn o n an d this message appears, there is a mal
funct ion in the ABS system or e lectronic differen
tia l lock. This also causes the ESC to malfunction.
The brakes still function with their normal power, but ABS is not active.
Drive to an authorized A udi dealer or au thorized
Audi Se rvice Facility immediate ly to have the
malfunction corrected.
A WARNING
If the 1111 (USA models) • (Canada mod
e ls) brake system ind icator light turns on to
gethe r with the ABS and ESC ind icator lights,
the ABS a nd ESC regulating fu nction may
h ave mal func tioned. Funct io ns that stab ilize
co
co
.... N
" N .... 0
00
\.J '
the risk that the vehicle will slide. Drive care
fully to the nearest authorized Audi dealer or authorized Audi Service Fac ility and have the
ma lfunction corrected.
(D Tips
For additional information on ESC and ABS,
see
r:::> page 120 .
ii !i.' Safety systems
The II (USA models) / m (Canada models) indi
cator l ight monitors the safety systems.
If the
II (USA models)/ m (Canada models) in
d icator light turns on or blinks, there is a mal
function in a safety system such as the airbag or
be lt tensioner system .
Drive to an authori zed Audi dealer or authorized
Aud i Service Facility immediately to have the
malfunct ion corrected .
_& WARNING
Have the malfunct ion in the safety systems
inspected immediately . Otherwise, there is a
r isk that the systems may not activate during
a collision, which increases the risk of serious
injury or death.
{0 } Brake pads
EIJ Brake pads!
The brake pads are worn.
Drive to an authorized Aud i dealer or authorized
Aud i Service Facility immediately to have the
b rake pads checked.
Applies to: USA models
The EIJ ind icator light turns on together w ith the
11111 i ndicator light
EPC Engine control (gasoline engine)
If the 13:a indicator light turns on if there is a
malfunction in the engine control.
Instruments and indicator lights
Drive slowly to an authorized Audi dea ler or au
thorized Audi Service Facility to have the engine
checked.
W Engine control (diesel engine)
The engine is preheating if the II indicator light
turns on when the ignition is switched on .
If the indicator light does not turn on or blinks
while driving, there is an engine control malfunc
t ion.
Immediate ly drive s low ly to an authorized Audi
dealer or authorized Audi Service Facility to have
the malfunction corrected.
C Malfunction indicator lamp (MIL)
The malfunction indicator lamp (MIL) is part of
the On Board Diagnostic system (OBD II) . The
¢4 c;ymbol turns on when the ignition is sw itched
on and turns off aga in once the engine is started
and running at a steady idle speed. This indicates
that the MIL is f unct ion ing correctly.
The indicator light turns on if there is a malfunc
t ion in the engine electronics . See an authorized
Audi dealer or authorized Audi Service Fac ility to
have the malfunction corrected. Fo r additional
information, seer:>
page 25.
The ind icator light can also turn on if the fuel fill
er cap is not closed correctly
r:::>page 193.
_r~ Diesel particulate filter
Applies to: vehicles with diesel engine and diesel particulate
filter
II Particulate filter: System fault See owner's
manual
The diesel particulate filter requires regenera
t ion . To support the filter 's self -clean ing func
t ion:
Drive for approximately 15 minutes at 37 mph
(60 km/h) or above in the S selector lever posi
t ion . Keep the engine speed around 2,000 RPM .
The temperature increase that will result from
t hi s can burn off the soot in the fi lter. The indica
tor light wi ll tu rn off when the cleaning has com-
pleted successfully. .,..
17
co
co
.... N
" N .... 0
00
<.,;) 'SI"
You can call up the following information in the
on-board computer:
- Date
- Driving time from the short-term memory
- Average consumpt ion from the short-term
memory
- Average speed from the short-term memory
- Distance driven from the short-term memory
- Current fuel consumption
- Short-term memory overview
- Long-term memory overview
The short-term memory co llects driving informa
tion from the t ime the ignition is switched on un
til it is switched off.
If you continue driv ing with
in two hours af ter switching the ignition off, the
new values are included when calculat ing the cur
rent trip information .
Unlike the short-term memory, the long-term
memory is not erased automat ically. Yo u can se
l ect the time period for evaluating trip informa
tion yourself.
F or some veh icle functions, you can access the
driving info rmation from the short-term memory
in the
line @c:>page21, fig. 5.
Fuel consumption
The current fue l consumption can be shown us
ing a bar g raph c:>
fig. 8. The average consump
tion stored in the short-term memory is also dis
p la yed. If the bar is green, your vehicle is saving
fuel through one of the following functions:
-Re cuperation : electrical ene rgy can be stored in
the vehicle battery when the vehicle is coasting or driving downhill. The bar will move toward
0.
-Cylinder on demand system*: the engine auto
matically switches four cylinders off when low
er power output is required and other condi
tions are met . This change is not noticeable to
the passengers.
@ Tips
The date, time of day and time and date for
mat can be set in the Infotainment system
qpage24 .
Driver in forma tion system
Efficiency program
Applies to: vehicles with efficiency prog ram
Fi g. 9 Instrument cluster: other equ ipment
Fig. 10 Instrument cluster: economy t ip
T he eff iciency program can help you to use less
fuel.
It shows other consumers that are using
f uel and economy tips give advice on how to dr ive
efficiently. The efficiency program receives dis
tance and consumption data from the on-board
computer.
T o display the efficien cy program, open the
Vehi
cle functions
menu and select the Efficiency pro·
gram
menu item.
Other consumers
T he Energy consumers view lists other equip
ment that is currently affecting fuel cons ump
tion. The display shows up to three o ther equ ip
ment items @c:>
fig. 9. The equipment using the
most power is listed first. If more than three
items using power are switched on, the equip
ment that is current ly using the most power is
displayed.
A gauge @also shows the current tota l con
sumption of all other consumers.
23
co
co
.... N
" N .... 0
00
<.,;) 'SI"
Adjusting the height
The height of the display can be adjusted to the
individua l driver .
.. Make s ure yo u are seated cor rect ly
<=> page 130.
.. Turn the knob~ to adjust the displ ay .
Settings in the Infotainment system
.. Se lect: the ICA RI function button > (Car )* Sys
tems
control b utton > Driver assistance >
Head-up display > Head-up di splay contents or
Display brightne ss .
Display content
In the Infotainment system, yo u can specify
which informa tion should be displayed: For ex
ample, th is can incl ude navigation informat ion*,
Adap tive cr uise con trol* or nig ht vision ass ist *.
T he display of certa in i nformation and some of
the red indicator lig hts cannot be h idden in the
I nfotainmen t system .
Display brightness
You can ad just the display brightness in the Info
tainmen t system. The display brig htness decreas
es automatically as the amount of light decreas
es . The backgro und bright ness is adjusted with
the ins trumen t illumina tion <=:>
pag e 43.
(D Note
To prevent scratches on t he g lass cove ring the
head-up d is p lay, do not place any o bjects in
t h e projection o pening.
(D Tips
-Su nglasses w it h polar izat ion fi lt e rs a nd u n
favo rab le lighting conditions can have a
negative effect o n th e di splay .
- An optim um display depe nds on the s eat
pos ition and th e height adjus tme nt of th e
h ead -up display .
- A sp ecia l wi ndshield is needed for th e head
u p d isplay f unction.
- Fo r info rmat ion o n cleaning, refer to
c::> ta
ble on page 237.
Driver in forma tion system
On Board Diagnostic
System (OBD)
Malfunction Indicator Lamp (MIL)
The Ma lfunction I ndicator Lamp (M IL) ¢• in the
inst rument cluste r is pa rt of the On-Board D iag
nostic (OBD
II) system .
T he w arnin g/i ndic ator lig ht ill uminates w hen the
ignition is sw itche d on an d goes out after the en
gine starts and the idle has stab ilized. This indi
cates that the MIL is wor king p roperly.
If the light does not go out a fter the eng ine is
started, or illum inates w hile you are drivin g, a
malfu nction may ex ist in t he engine system . If
t h e lig ht ill uminates, the catalytic converter
cou ld be damaged.
Cont inue d riving
with reduced power (avoiding
s u stai ned high speeds and/o r rap id accelera
t ions) and have the condition corrected. Contact
yo ur aut hori zed Aud i deale r.
If the light illum inates, the elect ronic speed lim
ite r may also be ma lf u nct io ni ng. For more infor
mation
c::> page 26, E lectronic speed limiter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
<=> page 193 .
On-Board Diagnostics
Fig. 14 Location of Data Link Co nnector (D LC)
On- Boar d Dia gno sti cs m onitors the components
of your emissio n con trol system . Each monitore d
com ponent in your engine system has been as
s igned a code . In case of a malfunction, the com
ponent will be ident ified and the fault sto red as a
code in the contro l modu le memory.
II>
25
co
co
.... N
" N .... 0
00
\.J '
Central locking
Description
You can lock and unlock the veh icle centrally . You
have the following options:
- Remote control key¢
page 30,
-Sensors in the door handles* ¢ page 30,
-Lock cylinder on the driver 's door c::> page 32,
or
- Interior central locking switch
c::> page 31.
Turn signals
The turn s ignals flash twice when you unlock the
veh icle and flash once when you lock the veh icle.
If the blinking continues, one of the doors or the
luggage compartment lid/hood is not closed or
the ignition is still switched on.
Auto Lock
The Auto Lock function locks all doors and the
l uggage compartment lid once the speed has ex
ceeded approximately 9 mph (15 km/h).
The vehicle can be unlocked if the opening func
tion in the central locking system sw itch is used
or one of the door handles is pulled.
The Auto Lock funct ion can be switched on and
off in the Infotainment system
c::>page 32.
In the event of a crash with airbag deployment,
the doors will also automatically unlock to allow
access to the veh icle.
Selective door unlocking
The doors and luggage compartment lid will lock
when they close. You can set in the Infotainment
system whether
only the driver's door or the en
tire vehicle should be unlocked when unlocking
c::> page 32.
Unintentionally locking yourself out
The following conditions prevent you from lock
ing your remote control key in the vehicle :
- If the driver's door is open, the vehicle cannot
be locked by pressing the
Iii button on the re-
Opening and closing
mote contro l key or touching the locking sen
sor* on a door.
- When locking using the
Iii button in the central
locking switch, the vehicle will not lock if a door
is open
c::> page 31.
- On vehicles with a convenience key*, the lug
gage compartment lid unlocks again after clos
ing if the most recent ly used key is in the lug
gage compartment. The emergency flashers
blink four times.
Do not lock your vehicle with the remote control
key or convenience key* until all doors and the
luggage compartment lid are closed. This helps
to prevent you from locking yourself out acciden
tally .
Closing aid on the doors*
The vehicle doors are equipped with closing aids.
When closing a door, you only have to let it fall
lightly into the latch. It then closes automatically
c::> &..
A WARNING
-
-When you lock your vehicle from outs ide,
nobody -espec ially children -should rema in
inside the vehicle . Remember, when you
lock the vehicle from the outside the win
dows cannot be opened from the inside.
- When you leave the vehicle, always take the
ignit ion key with yo u. This will prevent pas
sengers (children, for examp le) from acci
dentally being locked in the vehicle should
they accidentally press the power locking
switch in the doors.
- Do not leave children inside the vehicle un
supervised. In an emergency it would be im
possible to open the doors from the outside
without the key.
- Applies to vehicles with power side door
closer*:
- When closing a door, make sure nothing
can interfere with the door. Th is could
cause serious person al inj ury.
- You can stop the door from closing at any
time by pulling on the inside or outside
door handle .
27