2017 AUDI A4 Owners Manual

<( a, .... N ,....
N .... 0 0
3 a,
0 - all adjustment functions ar e deactivated .
Q / P -adjust ing the left/ right exterio r mirror.
Move the knob in the desired direction .
4iil -Heat* the mirror glass depending on the out­
side temperature .
8 -Folding ex terior mirro rs* . To fold the m irrors
out , turn the knob to one of the other pos itions .
In the Infotainment system, you can select if the mirro rs fo ld in automatically when you lock the
ve hicl e
r:::) page 41 .
Front pa ssenger's e xterior mirror tilt
function*
To he lp you see the curb when back ing into a
pa rking space, t he surface of the mirror tilts
slightly . Fo r th is to happen, the knob m ust be in
the posit io n for the front passenger 's ou tside
mirror.
You can adjust the t ilted m irror surface by turn­
i n g the knob in the desi red direction . When you
move ou t of reverse and into another gear, the
new mirror position is sto red and assigned to the
k ey yo u are using.
The mir ror goes back into its o rig inal position
once yo u drive forward f aster than 9 mph
(15 km/h) or turn the ignition off .
A WARNING
Curved mirror surfaces (for examp le convex)
en large the f ield of vision . However, they
make objects in the mirror appear sma ller
and farther away. Your may estimate i ncor­
rectly when you use these m irrors to ga uge
your dis tance from the vehicles behind you
when changing lanes, wh ich increases the r is k
of an accident.
(D Note
- Applies to vehicles with power folding out ­
s ide mir rors* : if the mirror housing was
moved by outside forces (such as an impa ct
whe n maneuvering), yo u m ust use the pow­
e r folding func tion to fol d the mi rror a ll t he
way o ut. T he mirro rs will make a lo ud no ise
when they latc h into place . The mir ror hous ­
ing must not be moved back into place by
Light s and Vision
hand beca use this would impai r the func ­
tion of the mirror mechanism.
- Applies to veh icles withou t power folding
outside mir rors : if the m irro r ho using was
moved by outside forces (such as an impact
when maneuvering), you must move it back
in place by hand .
- If you wash the vehicle in an automatic car
was h, you must fold the exter ior mir rors in
to reduce the r isk of damage to the m irrors.
Never fold power fo ld ing exter ior mirrors*
by hand . On ly fold them in and out us ing
the power controls .
(D Tips
-If the power adjusting function malfunc­
tions, the glass in both mirrors can be ad­
justed by p ressing on the edge of it by hand .
- The exterior m irror settings are stored w ith
the memory funct io n*
r:::) page 63.
Dimming the mirror
Your vehicle is equipped with a manual or auto­
matic* dimming rearview mirror .
Manual dimming rearview m irror
.. Pull the leve r on the bottom of the m ir r or back.
Automat ic dimming rearview mirror*
.. The inte rior a nd e xte rior m irrors d im automat i­
cally when light s hines on them, for examp le
from headlig hts on a ve hicle beh ind you.
A WARNING
=
If the g lass on an a utomatic dimming m irro r
b reaks, electro lyte can leak out. T his liquid
can irritate the skin, eyes and respiratory sys­
tem. If there is contact w ith the fluid, flush
i mmedia tely w ith p lenty of water. Consult a
p hysic ian if necessa ry .
- Re peated or long -term exposure to e lectro­
ly te fl uid can lead to ir rita tion of the air­
ways, especia lly in peopl e with ast hma o r
o ther respiratory condi tions. Take deep
b rea ths immedi ately afte r leaving the vehi ­
cle or, if this is not poss ible, open all of the
doors and w indows as wide as possib le .
55

Lights and Vision
-If electrolyte fluid enters the eyes, flush
them thoroughly with a large amount of
clean water for at least 15 minutes and then
seek medical attention .
- If electrolyte fluid comes into contact with
the skin, flush the affected area with clean
water for at least 15 minutes and then clean
with soap and water and seek medical at­
tention. Clean affected clothing and shoes
thoroughly before wearing again .
- If the fluid was swallowed and the person is
conscious, flush the mouth with water for at
least 15 minutes. Do not induce vomiting
unless this is recommended by medical pro­
fessionals. Seek medical attenti .on immedi­
ately.
(D Note
If the glass on an automatic dimming mirror
breaks, electrolyte can leak out . This liquid
damages plastic surfaces and paint. Clean
this liquid as quickly as possible, for example
with a wet sponge .
@ Tips
-If the light reaching the rearview mirror is
obstructed, the automatic dimming mirror
will not function correctly,
- The automatic dimming mirrors do not dim
when the interior lighting is turned on or
the reverse gear is selected .
Sun visors
9 ~
W--------- dna'i
Fig. 53 Sun vi sor
56
Sun visor
The sun visors for the driver and front passenger
can be released from their mounts and turned to­
ward the doors ¢
fig. 53 Q).
They can also be moved back and forth length­
wise in this position .
Vanity mirror
The mirror light* switches on when the cover over
the vanity mirror@opens .
Sunshade
Applies to: vehicles with sun shade
Fig. 54 Rear door: sunsh ade
"' Pull the sun shade out and a ttach i t to the re­
tainer on the upper door frame¢
fig. 54.
Windshield wipers
Switching the wipers on
Fig. 55 W inds hield w iper l eve r
Move the windshield wiper lever to the corre­
sponding position:
@ -wipers off
a,
0 0 :> ... m

<( a, .... N ,....
N .... 0 0
3 a,
(!)-Rain sensor mode. The windshield wipers
switch on once the vehicle speed exceeds approx­ imately 2 mph (4 km/h) and it is ra ining. The
higher the sensitivity of the rain sensor that is set
(switch @ to the right), the earlier the wind­
shield wipers react to moisture on the wind ­
sh ield . You can deactivate the rain sensor mode
in the Infota inment system, which switches the
intermittent mode on. To do th is, select:
! MENU !
button > Vehicle > left control button > Dri ver
a ss is ta nc e
> Rain sen sor. In intermittent mode ,
you can adjust the interva l time using the switch
@ .
@ -slow wip ing
@ -fast wip ing
© -sing le wipe If you hold the lever in this posi ­
tion longer, the wipers switch from slow wiping
to fast w iping.
® -clean the windsh ie ld The wipers wipe one
time after several seconds of dr iving to remove
water droplets. You can switch this function off
by moving the lever to position ® within
10 sec­
onds of the after-wipe . The after-wipe function is
react ivated the next time you switch the ign ition
on.
C leaning the headlights*. The headlight washer
system* operates only when the low beam head­ lights are sw itched on . If you move the lever into
position @, the headlights will be cleaned at
fixed intervals.
A WARNING
- T he rain sensor is only intended to assist the
driver. The driver may still be responsible
for manually switching the w ipers on based
on v is ibility conditions.
- The w indshie ld may not be treated with wa­
ter -repelling windshield coating agents. Un­
favorable conditions, s uch as wetness, dark­
ness or low sun, can result in increased
glare, which increases the risk of an acc i­
dent . Wiper blade chatter is also poss ible.
- Properly functioning windsh ield wiper
blades are required for a clear view and safe
dr iv ing to red uce the risk of an accident
Light s and Vision
c::> page 58, Changing windshield wiper
blades.
@ Note
- If there is frost, make sure the windshield
wiper blades are not frozen to the wind­
shield. Switching on the windshield wipers
when the blades are frozen to the wind­
shield can damage the w iper blades.
- Prior to using a car wash, the windshield
wiper system must be sw itched off (lever in
position
0). This prevents the wipers from
switching on unintentionally and caus ing
damage to the windsh ield wiper system.
@ Tips
- The windshield wipers switch off when the
ign ition is switched off. You can activate the
w indshield wipers after the ignition is
switched back on by moving the w indshield
w iper lever to any position.
- Wor n or dirty w indshie ld w iper blades resu lt
in st reaking. T his can affect the rain senso r
function. Check your windshield wiper
blades reg ularly.
- The washer fluid nozz les for the windshield
washer system are heated a t low tempera­
tures when the ignition is on .
- Whe n stopping tempo rar ily, such as at a
t raffic lig ht, the speed of the windshield
wipers automatically reduces by one level.
Cleaning windshield wiper blades
Clean the wiper b lades when you see wiper
streaks. Use a soft cloth and a g lass cleaner.
Wind shi eld wiper
... Place t he w indsh ie ld w iper arms in the service
position
c::> page 58 .
... Fold the windshie ld wiper arms away from the
windshie ld.
A WARNING
D irty windshie ld wiper blades can impa ir vi­
sion, wh ic h increases the risk of an accident.
57

Lights and Vision
Changing windshield wiper blades
Fig. 56 Remov ing w indshi eld w iper blades
Windshield wiper service position/blade
replacement position
• To bring the wipers into the service position ,
turn the ignition off and move the windshield
wiper lever into position @~
page 56, fig. 55.
• To bring the wipers into the starting position,
switch the ignition on and move the windshield
wiper lever into position @~
page 56, fig. 55
for at least two seconds .
You can also turn the service position on or off in
the Infotainment system :
• Switch the windshield wipers off (position @
~page 56, fig. 55).
• Select : th e IMENU i button> Vehicle> left con­
trol button >
Service & checks > Wiper change
position .
Removing the wiper blade
• Fold the windshield wiper arm away from the
windshield.
• Press the locking knob
(D ~ fig. 56 on the wiper
blade . Hold the wiper blade firmly.
• Remove the wiper blade in the direction of the
arrow .
Installing the wiper blade
• Insert the new wiper blade into the mount on
the wipe r arm @until it clicks into place.
• Place the wiper arm back on the windshield.
• Turn the service position off.
A WARNING
For safety reasons, the wiper blades should
be replaced once or twice each year .
58
-
(D Note
-Only fold the windshield wipers away when
they are in the service position. Otherwise,
you could damage the paint on the hood or
the windshield wiper motor.
- You should not move your vehicle or operate the windshield wiper lever when the wiper
arms are folded away from the windshield.
The windshield wipers would move back in­
to their original position and could damage
the hood and windshield.
- To help prevent damage to the wiper sys­
tem, always loosen blades which are frozen
to the windshield before operating the wip­
ers.
- To help prevent damage to the wiper
blades, do not use gasoline, kerosene, paint
thinner, or other solvents on or near the
wiper blades.
- To help prevent damage to the wiper arms
or other components, do not attempt to
move the wipers by hand.
{l) Tips
-You can also use the service position, for ex­
ample, if you want to protect the windshield
from icing by using a cover.
- You cannot activate the service position
when the hood is open.
Digital compass
Switching the compass on and off
App lies to: vehicles with digital compass
Fig. 57 Rearview mirror: d ig ital compass is sw itched on

.. To turn the compass on or off, press the button
@ until the compass in the mirror appears or
disappears.
The digital compass only works when the ign ition
is switched on. The direction is shown in abbrevi­
ated form:
N (North), NE (Northeast), E (East),
SE (Southeast), S (South), SW (Southwest), W
(West), NW (Northwest) .
Adjusting the magnetic zone
Applies to: vehicles with digital compass
Lights and V ision
(D Tips
To p revent inaccurate compass readings, do
not br ing any remote controls, electrical devi­
ces or metallic objects near the mirror.
The magnetic zone must be adjusted correctly for the compass to read accurately.
Fig. 58 Magnet ic zone map
.. Press and hold the button@¢ page 58, fig. 57
until the number of the set magnetic zone ap­
pears in the rearview mirror .
.. Press the button@repeatedly to select the
correct magnetic zone . The select ion mode
turns off after a few seconds. Calibrating the compass Applies
to: vehicles with digital compass
If the display is incorrect or inaccurate, the com­
pass must be recalibrated.
.. Press and hold the button @until a C appears
in the rearview mirror .
.. Dr ive in a circle at about 6 mph (10 km/h) until
a direction is displayed in the interior re arview
mirror. .,.
59

Lights and Vi sion
A WARNING
To reduce the risk to yourself and other dr iv­
ers, calibrate the compass in an area where
t here is no traffic .
60

Seats and storage
General information
A WARNING
Refer to Q page 236, Driving safety for im­
portant information, tips, suggestions and
warnings that you should read and follow for
your own safety and the safety of yo ur pas­
senge rs.
Front seats
Power seat adjustment
F ig. 59 Front seat: adj usting the seat
@ -Moving the seat forward/back: press the but­
ton fo rward/back .
@-Moving the seat up/down: p ress the button
up/dow n. To adjust the front seat cush ion, p ress
the fro nt bu tton up/down. To adjust the rear sea t
cushion, press the rear b utton up/down.
@ -Adjusting the backrest angle: press the but­
ton fo rward/back.
© -Lengthen ing/shortening the upper thigh
support* : lift the grip handle . A spring moves the
support forward .
CD -Adjusting the lumbar suppo rt: press the but­
ton in the corresponding position.
A WARNING
- The power front seats can also be adjusted
when the ig nition is switched off. For this
reason, children should neve r be left unat­
tended in the vehicle -they could be injured!
Seats and storag e
-To reduce the r isk of an accident, only adjust
the dr iver's seat when the vehicle is station­
ary.
- Exercise caution when adjust ing the seat
he ight. Unsupervised or careless seat ad­
justment can pinch fingers or hands caus ing
injuries .
- The front seat backrests must not be re­
clined too far back when driving, beca use
this impa irs the effect iveness of the safety
be lts and airbag system, which increases
the risk of injury.
Center armrest
There is a storage compartment under the arm ­
rest.
F ig . 60 Comfo rt center armrest be tween the driver's seat
and front passenger 's seat
.,. To adjust the angle, raise the armrest from the
starting position notch by notch .
.,. To br ing the armrest back into the starting po­
sition, raise it out of the top notch and fold it
back down.
The armrest can s lide forward and back .
61

Seats and storage
Head restraints
Front head restraints
•
Fig. 61 Front seat : adjust ing the comfo rt head restra in t*
Adj ust the head restraints so the upper edge is as
even as possible wi th the top of your head. If that
is not possible, try to adjust as close to this posi­
tion as possible.
~ To adjust the head restraint, press the side but­
ton and place the head restraint in the desired
position until it locks into place
i:::.> fig. 61.
_& WARNING
Always read and fo llow the applicable warn­
ings ¢
page 239, Proper adjustment of head
restraints.
Rear head restraints
Fig. 62 Rear seat: adjust ing th e hea d restra int
62
Fig. 63 Rear seat: removing the head restrai nt
If passengers are sitting in the outer rear seats,
adjus t the head restraints so that the upper edge
of the head restraint is as level as possible with
the upper part of their head.
If that is not possi­
bl e, try to adjust as close to this position as pos­
sible. Adjust the head restraint in the center seat
to be all the way up
c:> _& .
Adjusting the head restraints
~ To move the head restraint upward, hold it at
th e sides with both hands and slide it upward
until it clicks into place
c:> fig. 62.
~ To move the head restraint downward, press
the button -arrow-
c:> fig. 62 and slide the head
restraint downward .
Removing the head restraints
~ Move the head restraint upward as far as it can
go .
~ Press the re lease point ,:::., fig. 63 using the me ­
chanical key
c:> page 38, Key set and press the
button
c:> fig. 62. Pull the head restraint out of
the backrest at the same time ¢_& .
Installing the head restraints
~ Slide the posts on the head restraint down into
the guides until the posts click into place.
~ Press the button -arrow-c:> fig. 62 and slide the
head restraint all the way down. You should not
be able to remove the head restraint from the
backrest without pressing the button .
_& WARNING
-Always read and follow the applicable warn­
ings
i:::.> page 239, Proper adjustment of
head restraints.