2
NEW SYSTEM FEATURES
AROUND VIEW® MONITOR WITH
CAMERA AIDED SONAR (parking
sensor) (if so equipped)
With the ignition switch in the ON position,
the Around View® Monitor is activated by
pressing the CAMERA button
1, located
on the control panel, or by moving the shift
lever to the R (REVERSE) position. The
control panel displays various views of the
position of the vehicle.
When the shift lever is in the P (PARK), N (NEUTRAL) or D (DRIVE) position and the
CAMERA button
1 is pressed, the front view
and bird’s-eye view screen is displayed.
When the C AMERA button 1 is pressed
again, the front view and front-side view
screen is displayed.
When the shift lever is in the R (REVERSE) position, the rear view and bird’s-eye view screen
will be displayed.
When the C AMERA button 1 is pressed, the
rear view and front-side view screen will
be displayed.
The colored guide lines on the display screen indicate vehicle width and approximate distances
to objects with reference to the vehicle body line.
•
Red 1.5 ft (0.5 m); Y
ellow 3 ft (1 m);
Green 7 ft (2 m) and 10 ft (3 m)
There are some areas where the system will not show objects.
•
W
hen in the front or the rear view display, an
object below the bumper or on the ground may
not be viewed
2.
•
W
hen in the bird’s-eye view, a tall object near
the seam of the camera viewing areas
3 will
not appear in the monitor.
The distance between objects viewed on the Around View Monitor differs from the
actual distance.
Objects in the bird’ s-eye view will appear further
than the actual distance.
1
REAR VIEW & BIRD’S-EYE VIEW
REAR VIEW & FRONT-SIDE VIEW
FRONT VIEW & BIRD’S-EYE VIEW
FRONT VIEW & FRONT-SIDE VIEW
1
2
2
3
2009259_16b_Pathfinder_US_pQRG_121715.indd 212/17/15 5:01 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
