2016 NISSAN NOTE belt

SE-26
< REMOVAL AND INSTALLATION >
REAR SEAT
SEAT CUSHION
SEAT CUSHION : Removal and InstallationINFOID:0000000012432042
REMOVAL
1. Lift up the seat cushion assembly front edge (B) to release it from the seat cushion hooks (A) (LH/RH) andremove.
: Front
INSTALLATION
Installation is in the reverse order of removal.
SEATBACK
SEATBACK : Removal and InstallationINFOID:0000000012432043
REMOVAL
Seatback (LH)
1. Release seat belt retractor (center) (1) from seat belt buckle (LH) (2) using a suitable tool (A) as shown ( ).
2. Place the seatback (LH) in the folded down position.
3. Release hook fasteners (A).
4. Remove bolts (B) and the seatback (LH) (1).
19. Seatback pad (LH) 20. Seatback trim (LH) 21. Seatback latch finisher (LH)
22. Seatback frame (LH) 23. Seatback latch bracket (LH) 24. Seatback latch (LH)
25. Seatbelt guide finisher 26. Seat belt guide 27. Seatback (LH)
Pawl
JMJIA4835ZZ
ALHIA0315ZZ
ALJIA1242ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

FRONT SEATSE-31
< UNIT DISASSEMBLY AND ASSEMBLY >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
DRIVER SEAT WITHOUT LIFT AND ARMREST
1. Armrest 2. Seat cushion outer finisher (RH) 3. Seat belt buckle
4. Seat cushion outer finisher (LH) 5. Lift lever 6. Lift lever cap
7. Recline lever 8. Headrest holder (locked) 9. Headrest holder (free)
10. Headrest 11. Seat assembly
AWJIA1998ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

SE-32
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
DRIVER SIDE : Seatback
INFOID:0000000012834455
DISASSEMBLY
1. Remove the driver side front seat. Refer to SE-20, "DRIVER SIDE : Removal and Installation".
2. Remove the headrest.
3. Release trim strap (A) from the seat cushion frame.
4. Remove the armrest (1) (if equipped).
a. Unzip the armrest to access armrest bolt (A).
b. Remove armrest bolt (A) and armrest (1).
5. Release the J-hook retainer (C), unzip seatback zippers (A) and release J-clips (B).
6. Release the headrest holder locks as shown and remove. CAUTION:
Before removing the headrest holder, check its orientation
(front/rear and right/left).
1. Seat cushion outer finisher (RH) 2. Seat belt buckle 3. Seat cushion outer finisher
(LH)
4. Recline lever 5. Headrest holder (locked) 6. Headrest holder (free)
7. Headrest 8. Seat assembly
JMJIA6015ZZ
ALJIA0994ZZ
AWJIA1114ZZ
JMJIA4073ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

FRONT SEATSE-33
< UNIT DISASSEMBLY AND ASSEMBLY >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
ASSEMBLY
Assembly is in the reverse order of disassembly.
Smooth out all wrinkles during assembly.
DRIVER SIDE : Seat CushionINFOID:0000000012834456
DISASSEMBLY
1. Remove the drive side front seat. Refer to SE-20, "DRIVER SIDE : Removal and Installation".
2. Remove the recline lever (1).
3. Pull to release pawls and remove the lift lever cap (1) (if equipped).
4. Remove the lift lever screws (A) and remove lift lever (1) (if equipped).
5. Remove the seat cushion outer finisher (LH) (1).
a. Pull to release clips and pawls in the direction ( ) shown and remove.
6. Remove the seat belt buckle (LH). Refer to SB-8, "
FRONT SEAT BELT BUCKLE : Removal and Installa-
tion".
ALJIA1855ZZ
: Pawl
ALJIA1856ZZ
ALJIA1857ZZ
: Pawl
: Clip
ALJIA1858ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

SE-36
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
PASSENGER SIDE : Seatback
INFOID:0000000012834457
DISASSEMBLY
1. Remove the passenger side front seat. Refer to SE-22, "PASSENGER SIDE : Removal and Installation".
2. Remove the headrest.
3. Release trim strap (A) from the seat frame.
4. Release the J-hook retainer (C), unzip seatback zippers (A) and release J-clips (B).
5. Release the headrest holder locks as shown and remove. CAUTION:
Before removing the headrest holder, check its orientation
(front/rear and right/left).
ASSEMBLY
Assembly is in the reverse order of disassembly.
Smooth out all wrinkles during assembly.
PASSENGER SIDE : Seat CushionINFOID:0000000012834458
DISASSEMBLY
1. Remove the passenger side front seat. Refer to SE-22, "PASSENGER SIDE : Removal and Installation".
7. Occupant classification system sen-
sors 8. Occupant classification system har-
ness 9. Occupant classification
system control unit
10. Seat belt buckle 11. Seat cushion outer finisher (LH)
AWJIA0913ZZ
AWJIA1115ZZ
JMJIA4073ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

FRONT SEATSE-37
< UNIT DISASSEMBLY AND ASSEMBLY >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
2. Remove recline lever (1).
3. Release clips and pawls using suitable tool and remove the seat cushion outer finisher (RH) (1).
4. Remove seat belt buckle (RH). Refer to SB-8, "
FRONT SEAT BELT BUCKLE : Removal and Installation".
5. Release the clips and pawls using a suitable tool and remove the seat cushion outer finisher (LH) (1).
ASSEMBLY
Assembly is in the reverse order of disassembly.
Smooth out all wrinkles during assembly.
ALJIA1852ZZ
: Pawl
: Clip
ALJIA1853ZZ
: Pawl
: Clip
ALJIA1854ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

REAR SEATSE-39
< UNIT DISASSEMBLY AND ASSEMBLY >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
7. Headrest holder (free) 8. Seatback latch bracket (RH) 9. Seatback latch (RH)
10. Seatback frame (RH) 11. Seatback latch finisher (RH) 12. Seatback latch release knob
13. Seatback trim (RH) 14. Seatback pad (RH) 15. Seat cushion hook
16. Seat cushion 17. Seat cushion pad 18. Seat cushion trim
19. Cup holder 20. Armrest 21. Armrest hinge bracket
22. Armrest pivot bolt bushing 23. Armrest pivot bolt 24. Armrest hinge bracket finisher
(RH)
25. Bushing 26. Armrest hinge bracket finisher (LH) 27. Seatback pad (LH)
28. Seatback trim (LH) 29. Seatback latch finisher (LH) 30. Seatback frame (LH)
31. Seatback latch bracket (LH) 32. Seatback latch (LH) 33. Seatbelt guide finisher
34. Seat belt guide 35. Seatback (LH)
Pawl
Revision: August 2015 2016 Versa Note

cardiagn.com

REAR SEATSE-41
< UNIT DISASSEMBLY AND ASSEMBLY >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
Seat CushionINFOID:0000000012432055
DISASSEMBLY
1. Remove the seat cushion. Refer to SE-26, "SEAT CUSHION : Removal and Installation".
2. Remove the hog rings on the bottom side of seat cushion.
3. Remove the hog rings on the top side of seat cushi on and separate the seat cushion trim from the seat
cushion pad.
NOTE:
Remove all pieces of hog rings and discard them.
ASSEMBLY
Assembly is in the reverse order of disassembly.
• Install new hog rings on the seat cushion trim in original positions.
• Use only one hog ring in each designated location.
• Make sure hog rings are correctly fastened around both the seat cushion trim and seat cushion pad wires.
• Use NISSAN standard hog rings and tools to assemble.
19. Seatback pad (LH) 20. Seatback trim (LH) 21. Seatback latch finisher (LH)
22. Seatback frame (LH) 23. Seatback latch bracket (LH) 24. Seatback latch (LH)
25. Seatbelt guide finisher 26. Seat belt guide 27. Seatback (LH)
Pawl
1. Seat cushion pad 2. Seat cushion trim
Hog rings
ALJIA1251ZZ
PIIB3356J
Revision: August 2015 2016 Versa Note

cardiagn.com